Search Documents

By S Strohmayr, R Harvey, A See

Ernest Henry Mining Pty Ltd started production in August 1997. The Ernest Henry orebody consists of two distinct parts, a complex supergene ore zone overlying a primary ore zone. The economic copper minerals in the supergene ore were chalcocite, bornite, secondary chalcopyrite and native copper while the primary zone has only chalcopyrite. The variability of the supergene zone made concentrator operation difficult and predicting metallurgical performance using mineralogy essential to establish the capabilities of the concentrator. A paper presented at the 1998 Mine to Mill Conference entitled Mineralogy Controlling Metallurgy at Ernest Henry Mining (Barnes, Strohmayr, Brindley and Munro, 1998) presented the testwork and initial plant surveys that showed that the mineralogy of the ore controls the metallurgy of the concentrator. This paper presents the data obtained from the subsequent years of operation treating both the supergene and primary ore types. A review of the actual supergene mineral distribution in feed and subsequent recoveries compared to those predicted as part of the flowsheet design is also presented.

Jan 1, 2003

Alliance Gold Mines was established in the early part of 1994 to acquire the assets of Diamin Resources NL at Maldon, Victoria. These comprised Exploration Licence 3422, some 20 sq km in area and enclosing the main part of the Goldfield, and a CIP plant - with a nominal capacity of 250 000 tpa - which was commissioned in 1988. Between 1988 and 1992 Diamin had mined - by open pit methods - and milled around one million tonnes of low grade gold ore, and recovered 55 000 ounces of gold. By 1992 the known shallow resources had been depleted. Historical gold production from the Maldon field is about 1.75 million ounces, at the surprising average recovered grade of 28 g/t. The last significant mine closed in 1926: since then there has been no comprehensive exploration program, though Lone Star Exploration NL tested part of the field for shallow open-pittable resources in the 1970s and Carpentaria Exploration Company Pty Ltd carried out widely-spaced drilling on the three main reefs from 1979 to 1982. Diamin (1983 - 1994) commenced a careful compilation of old mine records and newspaper clippings, and drilled several cored holes.

Jan 1, 1996

By Davey CJ

An integrated computer software system has been developed by Fluor Australia for modelling, mine planning and production scheduling of single or multi-strata deposits. Modelling of both quantitative and qualitative variables (e.g., thickness, basal elevation, density, grade/ash content) is performed via continuous, minimum curvature surface representations. These may be developed from inverse distance weighting or geostatistical kriging interpolation techniques in conjunction with bicubic spline surface interpolation. The modelling process, rather than being purely mathematical, incorporates facilities for reflecting structural geology interpretations (e.g., faulting, pinchouts) and geological boundary conditions (e.g., subcrop and outcrop). Volumetric programs provide the facility for continuous integration over models (at any specified integration increment) for any number of specified irregular polygonal panel areas or regular rectilinearly defined block plan areas. Multi-variable integration is available, incorporating any or all operations of addition, subtraction, multiplication and division to provide multi-strata tonnages, etc., (e.g., Volume 1 * density 1 + Volume 2 density 2). These programs provide true three-dimensional integration with the facility for calculating results on an area by area, level by level, strata by strata as well as overall basis.

Jan 1, 1983

This paper provides an expanded definition of industrial minerals that challenges the way we look at exploration, development and the understanding of mineral industry structure and profitability. Included in industrial minerals are bulk commodities such as iron ore and coal alongside the more traditional industrial minerals such as salt, soda ash, silica sand and clay. The profitability of industrial minerals is reviewed from a producerÆs perspective and shown in many instances to be significantly higher than for precious and base metal industries. The key drivers of profitability are examined along with some highly profitable industrial mineral industries such as borate, potash, chromite and natural soda ash. Demand for industrial minerals in Australia and Asia is reviewed, with a focus on supply bottlenecks and the opportunity this represents for investment by Australian companies. The establishment of new price benchmarks is considered and the possibility of new export grades for industrial mineral products. Investment opportunities in industrial mineral projects are outlined, including some exploration concepts in Australia and Asia. Industrial mineral project evaluation methods are discussed and the challenge issued to companies (exploration, production and finance) to become a part of the profitable action in the world of industrial minerals.

Jan 1, 2004

Asian countries are now facing very crucial aspects of urban living under the recession of the economy. The current situation is such that those hard aspects may make the living standards worse and worse in the next century, unless proper measures are taken on the infrastructure for urban lives. More than half of the population in Asian countries are now living in cities. Nowadays, the socio-economic development of the Asian countries has been closely linked to the development of world economy because of the border-less economy system. The population inflow to big cities is inevitable as the Asian countries step into an industrialised economy. Such a tendency will be further accelerated when Asia becomes a centre of financial business in the 21st century. The government of any country has realised the situation very well. The United Nations has established a specific agency to solve the problems caused by the rapid urbanisation. This global agency for urbanisation is named United Nations Center for Human Settlement and it is so called Habitat. There are three Habitat offices in the world, Nairobi in Kenya, Santiago in Chile and Fukuoka in Japan. The activities of Habitat offices cover a wide field of issues such as housing, urban development, infrastructure and environment, etc. Habitat Fukuoka Office is serving Asia and Pacific in co-operation with the government offices concerned.

Jan 1, 1999

Anglo Platinum recognised with its expanded operations the need to change its evaluation strategy due to increased sample volumes and the pressure it created at laboratories. The sender/receiver analytical scenarios had to change in order to curb costs and to prevent substantial investments in new sampling and analytical facilities. Given the high cost associated with correct sampling systems and sampling protocols and the shortage of technical resources a strategy of single point sampling and analysis was introduced. The analysis was then done at an ISO17025 accredited laboratory with ten per cent checks, subjected to careful statistical scrutiny. Logistical problems increased with respect to weighbridge congestion, maintaining sampling quality, throughput of samples in the sample preparation areas, manual quality control systems in place, audit trails and analytical capacity throughout all operations. This required the expedited improvement of existing sampling practices and the development of new sampling methods and equipment. Anglo Platinum is classifying and standardising sampling equipment, sample preparation and analytical procedures for all process streams with the view to minimise overall uncertainties. Major investments were made into a customised LIMS and automated equipment for data management, reduction of manual transcription errors and streamlining of sample processing. Anglo Platinum is committed in rolling out the enhancements to all sites as priority dictates.

Jan 1, 2008

By Pollard P. J

Australia is well endowed with both tin and tungsten resources, and is currently a significant producer of both commodities for the international market. The intensity of exploration activity for both metals has been rather sporadic, reflecting the changing market situation. Thus tin has experienced three major boom periods around 1880, 1907 and 1983, while tungsten prices peaked around 1917, 1953, 1970 and 1977. During the earlier periods, the major discoveries were located utilising simple prospecting techniques involving creek travers- ing and stream sediment panning. The resulting location of tin alluvials quickly led to the discovery of adjacent primary deposits. The major tungsten deposits were composed of quartz- wolframite, which was readily visible as mineralised float both within the drainage systems and on scree slopes. Thus by the early 1900s most of the currently significant deposits had been located. More recent exploration approaches have combined these tradi- tional methods with the development of exploration models based on evolving genetic concepts. Within tin systems the emergence of province styles of clas- sification combined with enhanced perceptions of tonnage-grade characteristics and improved geological models has enabled more effective exploration strategies. Province classification at the inter- national scale demonstrated a clear relationship between deposit type and geological environment and thus considerable attention was given to the range of provinces present within Australia. Tonnage-grade diagrams enabled the refinement of economic per- spectives, while detailed models provided the basis for localised search parameters.

Jan 1, 1988

The theme i wish to develop in this talk is how we might make use of the scientific and technological knowledge we now have ofextraction metallurgy to meet the present-day needs of the production industry.Before doing so, I would like to say a few words in tribute to Dr. G.K. Williams since he was a past master at precisely what I wish to talk about. I knew G.K., as everybody called him, during the time he spent at Avonmouth in the late 40's and in the 50's. Later, when he was ostensibly retired, I had the pleasure several times of lunching with him when I was visiting Melbourne.When G.K. was at Avonmouth, the Imperial Smelting Process was in that capricious adolescent stage in between the pilot plant and the full-scale commercial unit. G.K. was a great collector of process plant data which hung in cascades from the walls of his office and-from his hand-operated desk calculator. What G.K. understood very well were the basic metallurgical and engineering principles of what was going on in the sinter machine, the shaft furnace and all their ancillaries.

Jan 1, 1985

Optimising a mining or a quarrying operation about the overall cost is quite a challenge as there never is a situation where we have exactly the same conditions regarding rock properties, explosives' performance, mining equipment or evironmental restrictions. The amount of endless influencing parameters and variables make the evaluation process difficult. The enormous progress we have seen during the recent two decades in computing has however significantly increased our ability to evaluate and process the information gathered, and refine our existing prediction models. Refined models demand an increasing volume of good quality information to show reliable conformity with reality. There is a great need for co-operative work in the mining and quarrying society if we shall be able to screen all available data, systematically find the key-parameters influencing the results and to build robust scientific models. No organisations today have all the skilled people needed or can afford to hire the necessary specialists in all the overlapping branches. This paper highlights some on-going work where the Dyno Explosives Group is adding some new pieces to the giant jigsaw puzzle representing the ultimate model of the mining and quarrying operations we all of this society would like to see completed.

Jan 1, 1995

By Smith I, Gowan M

With the advent of increased environmental regulation and high penalties for non-compliance in many countries, there has grown a need for all industries to assess their risk with respect to environmental compliance and consequently develop management systems which ensure environmental compliance and sound environmental practice. The need to better assess and manage environmental risk has developed rapidly as legal and financial penalties have increased for inappropriate management of the environment. The mechanism that industry has developed to manage risk is through the use of environmental management systems. These environmental management systems are generally based on the principles of total quality management. For example the British Standard BS7750 (Specification for Environmental Management System) shares common management system principles with ISO 9000 quality management systems. The same trends of increased environmental regulation and higher penalties for environmental impairment are now evident in Australia where environmental management systems are now being introduced. With increased penalties for environmental impairment and greater responsibility of managers and directors, environmental management systems are likely to become even more common in Australia. This paper describes some of the influences directing environmental management within the Australian industrial and mining environment, describes the elements of an environmental management system and relates these to the mining industry.

Jan 1, 1994

Sluice-boxes are by far the most widely used concentrating devices by small-scale operators in PNG who work alluvial gold deposits. The sluice-box designs and their operating conditions used are known to vary widely. The selection of sluice-box configuration and the operating parameters such as the water flow rate is purely based on past experience. Some use small flowrates to increase the fine gold recovery at the expense of efficient separations and capacity while others use high flow rates resulting in increased fine gold losses but with high throughput rates. Recent work has revealed that the combination of riffle height, their spacing and wash water flow rate are the most important parameters that determine the success or failure of such operations. This combination has been shown to depend on the in situ gold and gangue size distributions of the deposit being processed. This paper describes a design procedure which uses a non-linear optimisation method to determine the optimal combination of the above parameters to maximise the metallurgical efficiency of such operations.

Jan 1, 1993

The gold industry has been revolutionized in the last decade by market forces and technological changes. The latter are discussed in this paper, with particular emphasis on carbon-in-pulp (CIP) and heap leaching. The nature and scope of the process development aspects of a gold project are considered, and factors which determine process decisions are outlined, including the choice of CIP versus carbon-in-leach (CIL), agitated leaching versus heap leaching and treatment of ores containing copper and silver. Likely directions for development of gold processing in general are discussed, and metallurgical process options for treatment of ores of platinum group metals (PGM) are outlined.Metallurgical process development for gold and platinum group metals proceeds through a number of well defined stages, with input from various disciplines and information sources. The orientation phase will include preparation of a general project overview; careful consideration of the issue of sampling and sample preparation; characterisation of the resource in terms of ore types, mineralogy, chemical composition; development of appropriate methodology; and development of an understanding of the potential metallurgical unit operations.The process definition phase will be-'directed to development and definition of a notional process flowsheet, and will include identification and appraisal of process options; development of, notional process flowsheets; testing of flowsheets against ore types; ranking of flowsheets; initial engineering, including preliminary mass balances, equipment selection and plant layout; and broad-brush economic appraisal.

Jan 1, 1986

The port of Townsville is situated on the main north/south rail system of the Queens- land Government Railways and is the eastern terminus of the east/west rail link from Towns- ville to Mount Isa. With a stable beef and wool producing area along the east/west rail route, the expanding mineral industry development at its western end and the continuing growth of the Townsville region the administrators of the port are continually'keeping abreast and ahead of port development to ensure an effective and economic growth of port facilities to meet the needs of the area served by Townsville.

Jan 1, 1974

By Emerson D. W

The search for economic mineral deposits is becoming more difficult as exploration goes deeper in the established mining camps and spread out to the surrounding covered areas, which may have an `overburden' some hundreds of metres thick. Geophysics is finding an ever increasing role in such exploration. When the target is zinc, the task often becomes even more difficult since sphalerite, the most commonly mined mineral, is non-magnetic, resistive, and relatively light compared to other sulphides. Fortunately, sphalerite commonly occurs in association with other sulphides, which are magnetic and/or conductive and/or heavy, thus most zinc-rich orebodies have at least one contrasting physical property to aid exploration. This paper presents the physical properties of sphalerite and other potentially important zinc minerals. Results of petrophysical measurements of samples from various zinc-rich ores are presented together with examples of geophysical surveys over a number of zinc deposits. The results show that the physical properties are not merely dependent upon the properties of the orebodies' constituent minerals. For example, the small (0.4 Mt) and low-grade (five per cent Zn + three per cent Pb + two per cent other sulphides) Flying Doctor deposit at Broken Hill, New South Wales (NSW) is much more conductive than the large (3+ Mt) and high grade (14 per cent Zn + five per cent Pb) Cadjebut deposit in Western Australia (WA). In the former case, tectonic stresses have

Jan 1, 1993

The classic description of Project Finance as "the reliance by lenders on the cashflow of a project, supported by the assets of the project with no recourse to the project sponsor's corporate balance sheet" has, like most other terms in the finance industry, evolved through recent usage. The area now under most scrutiny is the sharing of risks between parties either most able to take them or prepared to accept payment for them. Creativity in, and flexibility of financing structures have enabled project lending to continue under a dramatically different economic outlook. The diminishing competitiveness of the Australian producers in a global market place of uncertain commodity prices has discouraged the advancement of many large scale resource projects. The majority of new project financings has been designed to assist the relatively small company promote and develop its first projects. New trends- are emerging in four areas: sources of capital; borrowing structure; financing instruments (securitisation); and risk underpinning. As project financing becomes more widely used, the range of interested financiers grows. New initiatives contribute to its development and evolution with a view to increase effectiveness to the sponsor of any new venture.

Jan 1, 1987

The purpose of any feasibility study is to determine whether a particular investment or management program will enhance shareholder wealth by, for example, producing an economic return in excess of the cost of equity capital.The threshold rate of return conventionally used in gold feasibility studies is higher than the cost of equity capital, meaning that some viable projects are wrongly described as being sub-economic with their development deferred.Is the industry failing to fully realise its potential? Aside from important technical considerations that determine the cost of exploiting inground inventories, feasibility studies need to incorporate expectations about future gold prices, exchange rates, interest rates and tax rates.Rather than revert to speculation, insights from capital markets give a rigorous framework in which these parameters can be determined for feasibility purposes. Separate questions sometimes, and then inadequately, addressed by feasibility studies include: ò Is it optimum? Many projects are expanded soon after project commissioning - what does this say about the quality of the initial feasibility study? Moreover, does the rate of extraction really matter? ò What is it worth? Although feasibility studies are designed to address viability rather than valuation, such studies are never- theless used by the industry as further evidence that the equity markets have got it wrong again! More likely the problem is with the financial slide rule being used. ò Can it be debt financed? The bankable feasibility study has entered the vocabulary of the gold mining industry but what does it mean? Does it matter anyway how the project is to be Financed?

Jan 1, 1991

Australia's gold mining industry has seen a resurgence in the past seven years - a resurgence the likes of which has been seen in very few, if any of this nation's other mineral industries. Industry experts are predicting that Australia could become one of the world's largest gold producers as the future of the South African gold industry looks increasingly tenuous under the present political crisis in that country. Therefore, it is utterly ludicrous for the Federal Government to introduce a tax which will see the Australian gold industry "wither on the vine."The Queensland State Government is utterly opposed to a tax on gold. Anyone in their right mind, who has seen the statistics could only agree with our stance. In 1984/85, activity in the gold mining industry is estimated to have accounted for over $750 million in national income, over$1,200 million in national output, and tax revenue of at least $115 million as well as providing more than 16,000 jobs. Chartered accountants Coopers and Lybrand's survey on the gold industry last year showed an increase in exploration expenditure by gold producers and explorers by up to 36% in 1986 from 1985 levels. That level is expected to be maintained in real terms for most of the remainder of the decade under the present tax arrangements. This is in contrast with the mining sector as a whole, where a recent Australian Mining Industry Council survey forecasted a 14% FALL in production.

Jan 1, 1986

By A A. Struthers, A D. Farmer

Power ultrasound may be applied to enhancing the processing of minerals. The enhanced performance is achieved through the very localised high-energy release at the mineral surface from the collapse of cavitation bubbles produced by power ultrasound. This gives rise to two effects: initially, the rapid cleaning of mineral surfaces û of oxidation products and coatings of fine adhering gangue minerals û and the attenuation of the boundary layer at the mineral surface during leaching, which allows fresh leachant to contact the surface more readily. Work carried out at CSIRO in conjunction with Tiwest Joint Venture has demonstrated that it is feasible to apply ultrasound to the leaching process in order to enhance the removal of contaminating minerals. When applied to the production of synthetic rutile from reduced ilmenite produced by the Becher process, the use of ultrasound proved beneficial to both the aeration and the final acid leach process. The effect of ultrasound was less marked in the case of the aeration process, once the method of introducing and dispersing the air was optimised. In the subsequent acid leaching step of the Becher process it was found that the application of power ultrasound could reduce leaching time to about one quarter of the time required when only agitation was employed. Projected capital and operating costs, based on currently available commercial equipment, are also presented, and indicate that the use of ultrasound is commercially as well as technically feasible.

Jan 1, 2001

By Sturgul J. R

A major electricity generating authority have a proposal to construct a Power Station. An understanding of the operation of the bunker system is of importance to the designers and a computer simulation model of the operation was constructed. The computer language used was GPSS/PC which is a recent form of the language designed for the per- sonal computer. The model simulated trains arriving at the power sta- tion and unloading onto conveyors which carry coal to the power station bunker. Coal was drawn from the bunker at a specified feed rate to the power station. Numerous restrictions were placed on the model, if the bunker level got too high dozers would pull coal out of the bunker onto the stockpile, and if the level got too low the dozers would push coal back into the bunker. The conveyors and dozers were unavailable due to breakdown'at various times and trains would arrive randomly about a mean interarrival time. The system was simulated for 30 years of oper- ation and the model used a basic time unit of 30 minutes so that the system was updated 525,600 times during the simulation. The results of the simu- lation gave the designers a greater understanding of the critical factors in the operation, which may now be engineered to minimise adverse Effects.

Jan 1, 1988

This paper describes an investigation of the sampling problems which contributed to erroneous Concentrator production forecasts at the mining operation of Bougainville Copper Ltd (BCL) in the North Solomons province of Papua/New Guinea.Reference figures provided by independently verified commercial shipment data demonstrated the existence of a bias in the calculated Concentrator production; the challenge was to identify systematic errors in each of the contributory measurements (feed tonnage and feed, tailings and concentrate grades).The uncertainty surrounding specific sampling and measurement errors precluded optimum metallurgical control and performance of the milling circuit, encouraged disputes about the difference between Mine versus Concentrator production estimates, and cast some doubt on efforts to follow political guidelines concerning a maximum feed tonnage or recovery oriented mill operating concept.An evaluation of routine results as well as specifically targeted test work identified the sampling errors associated with measured individual parameters.The emphasis in this report is on the procedure for quantitative error assessments.The measured performance of a mineral dressing plant is subject to a systematic error balance which can be derived from the more familiar weight and metal balances such as the two- or three-product formula.The resulting equations are generally valid, and they are applied to the measurements obtained at BCL's Concentrator to illustrate the method.

Jan 1, 1976