Search Documents

A methodology is described to integrate heap leaching into a CIP operation. The paper firstly describes what is meant by a 'systems approach'. A broad view of the objectives of integration of heap leaching into CIP is given, followed by the components of the system, and then a description of the methodology for integration. The seven stages of integration are given as determination of distribution of gold, sampling, metallurgical testwork, conceptual study, pilot heap operation, pit modelling and pit optimisation. The final result is a series of optimised curves which determine the maximum value of the orebody, and the optimum cut-over grade from CIP to heap leaching.

Jan 1, 1992

By Lye GN

Rock mechanics investigations have shown that some major slopes in the Panguna pit would be stable at angles in excess of 500 providing near-surface instability could be controlled. Excavation of final batters at angles between 55¦ and 60¦ is now being carried out using D10 dozers with berms at 45 to 60 m centres. A trial slope with berms at 90 m centres is planned. Shotcreting of weak zones combined with crest reinforcement, with rock anchors and dowels, is used to provide protection against erosion and toppling of the crests. Overall slopes excavated in this way are of the order of 10¦ steeper than slopes obtained by blast and shovel excavation.

Jan 1, 1986

Perseverance Mine is a part of Leinster Nickel Operation (LNO), a fully owned division of Western Mining Corporation (WMC). The town of Leinster is located 370 kilometres north west of Kalgoorlie. LNO operates an underground gold mine and mill at Agnew, 30 kilometres west of the town in addition to two nickel mines and a mill 15 kilometres east of Leinster. Both the Perseverance and Rocky's Reward nickel orebodies are mined by open pit and underground methods.The Perseverance orebody was discovered in the early-1970s. Decline development commenced in 1977 and the first ore was milled in 1978. The shaft sink started in 1979. The shaft was comissioned in 1983, four years after sinking commenced. The mine was placed on care and maintenance in 1986 and purchased in January 1989 by WMC.

Jan 1, 1992

By Seshold P

The cost of capital is the rate at which a project's cash flow should be discounted to obtain the Net Present Value. The cost of capital is a weighted average of both debt and equity funds of a company, on an after tax basis. Two methods are described for calculating a company's cost of equity, the Dividend Valu- ation Model and, more importantly, the Capital Asset Pricing Model. A worked example is presented where the cost of capital was obtain- ed for two resource companies. The application of the cost of capital was illustrated by way of a mining equipment replacement problem. The paper outlines refinements and problems that may be encountered with the use of the cost of capital, and concludes that it is an integral part of any project evaluation.

Jan 1, 1983

Hilton Mine is located 20 km north of the city of Mount Isa and Isa Mine in far north west Queensland. The sealed road used by the 500 employees to commute from the city is part of the Barkly Highway linking Mt Isa to the Northern Territory.Although discovered in 1947, major underground development did not start until late-1982 and first cut-and-fill production in mid-1987. The J53 exploration shaft was sunk in 1970-73 and the main P49 shaft in 1973-75. Since January 1990, most of Hilton ore production has been treated in the Hilton Concentrator, and concentrates trucked in slurry tankers to Isa for smelting or shipping.

Jan 1, 1993

By B Wiggins, M Russell

Off-gas handling systems are a critical component of modern metallurgical furnaces and typically represent as much as 50 per cent of the total installed smelter capital cost. Inadequate off-gas system performance, due to insufficient exhaust flow or excess maintenance downtime, can present a serious process bottleneck and limit smelter production rate. Therefore, it is essential that the relevant performance issues are fully understood and considered in the design of these systems, particularly when combustibles produced within the furnace must be combusted or handled in the off-gas system. This paper examines the requirements, design issues, and conceptual design process for state-of-the-art postcombustion off-gas systems. The relevant design considerations of safety, environment, energy consumption, and maintenance are presented, and the relative importance of these key issues are compared and discussed. The benefits of using computational fluid dynamic (CFD) modeling in the design process at the conceptual design stage are also demonstrated. Finally, the design basis and performance of a recent Hatch-engineered system currently in operation is evaluated.

Jan 1, 2002

This data is intended to provide a quantative cost comparison of one 40 800 kg. pull down rotary blast hole drill versus two smalter drills in the 18 100 kg. pull down class. While this cost analysis is affected by blast design, this paper is not intended to be a treatise on blasting theory and therefore places more emphasis on costs than on blast design. All costs, prices and production rates in this paper are estimates and should be used for comparison purposes only. The drills are sized in order to maintain a production rate sufficient to stay ahead of a dragline that is excavating in an average overburden (sandstone and shale). The large drill will use 270mm bit and penetrate at a rate of 0.012 m/s (scheduled basis). The small drill will use 170mm bit and penetrate at a rate of 0.010 m/s (scheduled basis).

Jan 1, 1986

There is no good news! The market environment for raising capital for resource projects is getting tougher. The regulatory and accounting environment is fast becoming more difficult and the hurdles to successfully raising debt, lease, equity or hybrid finance are now considerably higher. As ever, well structured companies and capital issues can and will survive, if not thrive. An outline of the market and regulatory environment for successful issues is set out below, followed by some comparison of stockmarket values of resource assets compared to more technical appraisals.

Jan 1, 1990

By Smith P

The past 20 years have seen the replacement of hydraulic control of longwall mining systems by the neater. smaller and better controlled electronic units.Early problems of moisture and other effects on reliability were overcome to see electronically controlled supports chosen for Corrimal Colliery ten years ago. Lessons from Corrimal and elsewhere, with following improvements and sophistication led to wider use as exemplified by Meco and other electronically controlled supports used in more recent installations in New South Wales, Queensland, USA and Czechoslovakia of the total of over 80 electronically controlled support installations worldwide in the past decade. Present work is toward a fully "integrated face" of British Coal by 1993, incorporating the Meco automatic face straightening system already due for practical use in the UK later this year. However the manless face still appears to be some way off although the present minimum crews and close monitoring, including early warning, are promising stages.

Jan 1, 1991

Anodic stripping voltammetry is an analytical technique which has established some popularity for trace analysis of metals because of its sensitivity, selectivity and capability for simultaneous analysis of some elements. The technique can be readily adapted for field use because of its relative simplicity and low power requirements. This paper describes a relatively new instrument, the Portable Digital Voltammeter, developed by CSIRO, which utilises the glassy carbon electrode in a novel cell design and provides parts per billion (ug/L) sensitivity in an instrument which can be field operated. Ten elements, Zn, Cd, Tl, Pb, Cu, Sb, Bi, Hg, As and Au can be routinely analysed. Many of these elements are of interest to the mining industry, and to exploration geochemistry in particular. Case histories where the instrument has been successfully employed for stream and stream sediment analysis of Cu and Pb, for soil surveys of Cu and Au, and for Au in stream sediments and drill chips indicate there are advantages in having on-site data, during Exploration.

Jan 1, 1987

Arising from prospecting success, the underlying worth of the shares of a publicly listed mining exploration company can increase many-fold. Prompt and accurate reporting during the exploration stage is therefore essential. While there is scope for varying degrees of optimism or caution in statements about the future economic prospectivity of a mineral deposit which has been discovered, the directors of a mining exploration company have both a legal and ethical obligation to keep their shareholders and the general public fully informed as to the state of progress of, and significant factual results arising from its exploration efforts. Suggestions are made as to the desirable form and content of exploration reports up to and including the time when the orebody has been delineated in terms of assured tonnage and grade. The benefits which will flow from this greater disclosure are discussed.

Jan 1, 1979

By Shinnosuke U, Zhang HE

In this paper, it is shown that the higher the pre-activation concentration of copper ions in pulp, the larger the adsorption amounts of copper ions and xanthate on arsenopyrite surface, and the better the arsenopyrite flotability in strong alkaline medium. On arsenopyrite pre-activated with cupric ions, the xanthate adsorption density in strong alkaline medium is approximately equivalent to that of cupric ions. It is therefore concluded that an amount of copper ions adsorb on arsenopyrite surface first, and then an amount of xanthate can (and only can) adsorb dependently on the surface active sites produced by these adsorbed copper ions on the mineral, so that arsenopyrite is kept rather flotable and is hardly separated from pyrite even in very strong alkaline medium. Selectively wiping out the surface copper active sites on arsenopyrite is the key point of successful separation of pyrite from arsenopyrite. According to this theory, a new 'SZLI' (know-how) method was recommended to satisfactorily deal with the difficult separation.

Jan 1, 1993

By Sharma T

Laboratory investigations have been carried out on direct leaching of lead-zinc complex sulphide ore and zinc concentrate using ferric chloride. From the investigation it was observed that the use of 0.15 M and 2 M FeC13 gave an optimum dissolution of metal ions from ore and concentrate respectively. The kinetic studies conducted showed that the leaching reaction followed a shrinking core model for galena and sphalerite. The presence of impurities such as pyrite had increased the dissolution rate and reduced the consumption of ferric chloride. Further, the studies were conducted to recover dissolved zinc from the chloride solution by selectively precipitating it as zinc ammonium chloride.

Jan 1, 1992

By Tyson G. R

A novel system has been developed using computer imaging techniques to make on-line measurements of material on a moving conveyor. Meas- urements of the mass or volume of conveyor materials are important in large open pit mining operations such as those operated by the State Elec- tricity Commission of Victoria (SECV). Such on-line measurements can be used for monitoring and controlling the production and transport of coal or overburden, and to assist in maintaining production levels. This paper describes a conveyor burden volume measurement system which is currently under development at the Research and Development Department of the SECV and although targeted initially for use in the Commission's open cut mines, the system is suitable for use on any open conveyor system. A basic developmental system has been built to demon- strate the viability of the technique used and further work on the system is planned. The measurement technique and the major components which have been developed as part of the system are described, some comparisons are drawn with other existing measurement systems and potential errors and future development are discussed.

Jan 1, 1989

This paper deals with the evolution of present mechanised declining and orebody development practices at Kambalda, since their inception in 1969. Eight separate decline accesses have been established over the past eighteen years and to date some 175 kilometres of declining and lateral development has been achieved utilizing a wide range of mechanised development and mucking units. Improvements in-the range of equipment available, functionalization of the develop- ment tasks and the resultant changes to piecework contract structuring have all contributed to the improved performances achieved in this concept of mine development. Even though numerous development advance rate records have been established at Kambalda, an ongoing evaluation of changes to both drilling and mucking units is underway to further improve these development performance rates.

Jan 1, 1987

In presenting the paper, Mr. Davey quoted subsequent work which yielded k, at miscibility gap composition, of about 50.We can confirm the authors' findings for k j 300 for nearly pure tin to k 2 about 50 (average 47) from our own experience and from repeat experiments on materials described by the authors, at 1150°C.During laboratory-scale trials we also found confirmation of the authors' view that it is more difficult to reach equilibrium from the high-iron (in slag) side than from the low-iron (high-tin) side. Working from the high-iron side tends to yield results that point to a high k, leading to optimistic values of iron/tin ratio in final slags. In practice the smelting of a tin concentrate, unless it is exceptionally low in tin and high in iron, must yield initially a tin-rich slag and therefore equilibrium can only be reached from the "tinny" side.

Jan 1, 1967

The patented "Epytensic" pump of Minnovation Ltd, a multiple piston pump, is used widely on shearer loaders and by partial high pressure watcr jet cutting strategically in relation to cutter picks not only improves cutting rates, but saves power and increases the life of gearboxes and picks, as well as improving dust suppression. The "Face Side Pump", also a piston pump, located on the ranging arm gearhead has advantages over gateroad pumps and shearer body pumps. The "Extraction Drum", hydraulic air mover system, linked with the above innovations and high pressure water, have further advantages in methane and dust removal. Some modifications providing these systems need workshop applications but most are possible underground with minimal changes to shearer profiles and advantages of minimising hosing, along with the other advantages stated.

Jan 1, 1991

By Denholm WT

A mathematical model has been developed for intense pneumatic smelting processes, such as the Sirosmelt group of processes, to assist in establishing optimum process conditions and to permit operator training. The model first solicits input operating conditions from disk files and from the operator. During operation, the feed, fuel, and air (or oxygen) rates are automatically adjusted to maintain the desired process targets. Alternatively, these parameters, as with all other inputs, may be manually controlled by the operator. Selected process parameters are displayed to the terminal in a regularly updated diagram of the process,. Outputs of detailed information including heat and mass balances are available for immediate inspection or for use by ancillary plotting packages. Development of a robust free energy minimization routine has led to a flexible and time efficent model capable of handling a range of pyrometallurical systems. Modelling of tin smelting, lead smelting, copper smelting, matte fuming, and pneumatic steel-making has been sucessfully carried out. Typical outputs from the model are given and discussed in terms of their internal consistency and relationship to the operation of the relevant Sirosmelt process. `

Jan 1, 1984

Mining is claimed to be unique among industries owing to its dependence on exploration for its existence, the need to operate in remote, inhospitable areas, the vast capital sums required for development, the need to pay royalties regardless of profitabil- ity, the wide swings in prices for many of its products, the finite life of each-mineral deposit, its susceptibility to criticism by environmentalists, its dependence on export markets and sensitivity to' cost and exchange rate fluctuations, the uncertainties inherent in most mining legislation, pressures to grant mineral rights to aboriginal communities and the burden of having to finance its own infrastructure. The special problems of the industry have been recognised in the income tax laws which, generally speaking, allow for the deduction of all capital expenditure before tax is payable. Notable exceptions to this rule are the absence of special deductions for mineral processing facilities and the absence of any deductions for a large part of the expenditure on ports and port towns. The scope and extent of infrastructure expenditure is discussed. The consequences of the burden imposed on the industry include tax inequity, higher capital and operating costs, "high grading" and

Jan 1, 1974

By Borsaru M

The production of high-grade calcined bauxite is very dependent on the moisture content of the final product. Existing procedures rely on the ignition of small samples to monitor the effectiveness of the calcination process. The results obtained by this gravimetric technique are several hours behind production and do not permit regular adjustment of the furnace to optimize the control of the chemically bound water content (LOI).To provide rapid and hence more relevant results, a neutron moderation technique has been developed for measuring the LOI of bulk samples of calcined bauxite while they are still hot. The method uses fast neutrons from an 241 Am-Be neutron source to irradiate the samples, and the backscattered thermal neutrons detected are a measure of bound moisture content.The rms deviation between neutron and conventional determinations of LOI, in 15 calcined bauxite samples, was 0.08 per cent LOI over the range 0.1 to 0.9 per cent LOI. When allowance is made for the rms error in the ignition method, the error in the neutron method is found to be 0.07 per cent LOI.

Jan 1, 1985