Search Documents

By J. J. Wilson

To explain in detail the manufacture of seamless pipe and tubes is something I venture to say that has never been done to a point entirely satisfactory. The manufacture of seamless tubes dates back to 1885, when Mannesmann Brothers invented the roll-piercing mill. Ten years later R. C. Stiefel invented the disc-piercer, which first came into general use in this country. At the present time the Mannesmann roll and the Stiefel disc-piercers are used, the Mannesmann rolls particularly for the larger size billets. Sizes produced at first were relatively small and the product was cold drawn to provide a smooth surface. The early uses of seamless material were chiefly for mechanical purposes, such as boiler tubes and bicycle tubing, and the latter for some years taking the heaviest tonnage. Improvements in the hot process were gradually made; the early Pilger type rolls were largely superseded by the two-high rolling mill for rolling out the tube after being pierced, the reeling machine for diagonal rolling, the sizing mill for giving exact outside diameter, and finally the sinking mill for reducing larger diameter tubes to smaller diameters.

Jan 1, 1932

Thomas J. LIEN RMCMI PRESIDENT 1997-1998 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 94TH Regular Meeting and Convention to be held June 27 thru June 29, 1998 Snowmass Village, Colorado

Jan 1, 1997

Kenneth M. Payne RMCMI PRESIDENT 1994-1995 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 91st Regular Meeting and Convention to be held June 25 thru 27, 1995 Crested Butte, Colorado

Jan 1, 1994

[ ] Thomas B. Egan RMCMI PRESIDENT 1996-1997 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 93rd Regular Meeting and Convention to be held June 28 thru July 1, 1997 Steamboat Springs, Colorado

Jan 1, 1996

Marcie A. Greenberg RMCMI PRESIDENT 1995-1996 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 92nd Regular Meeting and Convention to be held June 30 thru July 2, 1996 Durango, Colorado

Jan 1, 1995

[CURTIS M. BELDEN RMCMI PRESIDENT 1999-2000 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 96th Regular Meeting and Convention to be held June 25 thru June 27,2000 Durango, Colorado]

Jan 1, 1999

RMCMl PRESIDENT CHARLES W. MARGOLF on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 81st Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held at Tamarron, Durango, Colorado JUNE 30, JULY 1 AND 2, 1985

Jan 1, 1984

CLARK MOSELEY RMCMI PRESIDENT 1998-1999 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 95th Regular Meeting and Convention to be held June 27 thru June 29, 1999 Crested Butte, Colorado

Jan 1, 1998

[ ] RMCMI PRESIDENT 1985 - 1986 ARTHUR K. NEILL on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 82nd Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held JUNE 29, 30 AND JULY 1, 1986 Kalispell, Montana

Jan 1, 1985

H. C. GLAZE: There is no question in my mind that the day of direct current distribution is practically ended so far as large coal properties are concerned. Another thing that Mr. Drennan touched on that is of the utmost importance, is that of voltage-voltage to the various pieces of equipment inside the mine. You all know how expensive it is to have motors in operation in important places where the voltage .is about half that which the motor should have. This is particularly true in the direct current system. It slows down production, causes burnouts and destruction to apparatus, and is a question that you men have got to go into. It costs a great deal of money, as Mr. Drennan pointed out, to take care of this. The wires are large and cumbersome, while; on the other hand, with an alternating current system you can use a minimum amount of wire. We have installed this class of equipment with so-called "pick-proof" cable of 2,200 volts down slopes, and I have never heard of any trouble whatsoever from this cause.

Jan 1, 1923

CHAIRMAN ALLEN: Gentlemen, I have been asked to call this meeting to order by Mr. Marchant, and am acting here temporarily in the absence of Mr. Nyman, who is unable to be with us. Mr. Nyman sends the following telegram: "Will not be able to be present at the Institute meeting. Serious illness of my father has made it necessary for me to remain in Salt Lake Please arrange substitute. Very sorry." In addition to having to pinch-hit for Mr. Marchant and President Nyman, I am here representing the Governor of the State of Colorado also who is unable to be here. The Governor of Colorado is a very busy man. His appointments are made months ahead. We only got word of the possibility of his addressing this meeting yesterday morning, and I went over to the Governor's office this morning to see if there was any possibility of getting him here, but he had been booked up for two months ahead of this time to appear at the convention of the Veterans of Foreign Wars in Trinidad, Colorado, where he is today, and which makes it impossible for him to attend this meeting. I know that he would have liked to have been here with you, as there is not any doubt but what the Governor of Colorado has the interests of the mining industry at heart. This was manifested last week when he called a meeting of representative men of the different lines of industry so that we could arrive at some results and some arrangements to see if it was possible to get at the bottom of the condition causing our bad times, and the appointment of commit- tee groups to find out what these problems were and to see if they could get any possible solution to them. The meeting was adjourned with the suggestion that those who were present would among themselves select such committees to investigate the conditions of the coal mining industry, and offer suggestions for betterment.

Jan 1, 1938

Dear Fred: Bobby Schultz sent me the attached copy of the 1926 Proceedings owe Rocky Mountain Coal Mining Institute which he borrowed from you after I had requested to get the volume containing a paper of mine on the hazards of electricity. I am returning it direct to you as requested by Bob. [ ] Thanks much to both of you. Very truly yours, [ ] D. HARRINGTON, Chief, Health and Safety Branch.

Jan 1, 1926

PRESIDENT LITTLEJOHN: Gentlemen, you have heard Mr. Dyer's paper. The meeting is now open for discussion. MR. NORMAN: I would like to ask the gentleman what is the distance between your crosscuts for the ventilation of rooms and entries in the state of Utah?

Jan 1, 1925

President Heiner opened the final session of the Institute at 9:30 a.m. Frances Leonard read the report of the Auditing Committee. Motion made by Stan Shubart for acceptance of audit and approval. Seconded and carried. R. R. Williams of the Resolutions Committee presented the following resolutions to the, group for their approval: RESOLVED: That the members of the Rocky Mountain Coal Mining Institute, in convention assembled, hereby ratify and confirm all official actions of the Officers, the Executive Committee and other committees of the Institute between and including July 3, 1963 and July 1, 1964.

Jan 1, 1964

The opening session of the Forty-seventh Meeting of the Rocky Mountain Coal Mining Institute was called to order at 10:00 o'clock a.m., Thursday, June 7, 1951, in the junior Ballroom of the Hotel Utah, Salt Lake City, Utah, with President Arthur B. Foulger presiding. PRESIDENT FOULGER: We are a little bit late getting started, gentlemen. We have a few more members out there to register and we will wait just a few minutes until they are finished and then we will begin. The Honorable Earl J. Glade won't be here until 2:00 o'clock this afternoon. I understand lie was unavoidably detained so we are going to go down this program pretty rapidly when we get started, but we want to wait until those gentlemen still unregistered come in. Gentlemen, we will try and start now. Mr. Whiteside suggests that the minutes for last year probably should be read. However, they were published in the proceedings for last year, so I presume it will be just as well to dispense with the minutes and get going here before we lose too much time.

Jan 1, 1951

The 75th Regular Meeting of The Rocky Mountain Coal Mining Institute convened at The Mark Conference Center, Lionshead Village, Vail, Colorado, and was in session at 10:00 a.m. Past President, Shirl C. McArthur, President and General Manager, American Coal Company, Huntington, Utah, called the meeting to order. The membership was asked to stand and pledge allegiance to the flag. He introduced President Robert E. Murray, President, Western Division and Subsidiary Companies, The North American Coal Corporation, Bismarck, North Dakota. A biographical sketch follows: Since 1974, Mr. Murray has been President of the Western Division of The North American Coal Corporation, as well as President of The Falkirk Mining Company and The Coteau Properties Company, wholly-owned subsidiaries of North American. Previously, Mr. Murray, who has been associated with North American for twenty- three years, served as Vice President-Operations, Vice President - Eastern Division, and Assistant to the President of the Company. In these positions, he was responsible for North American operations in Pennsylvania, North Dakota and Utah.

Jan 1, 1979

The session opened at 9:00 a.m. Presiding- Herman E. Knight, Vice President, The Pittsburg & Midway Coal Mining Co. and Gulf Mineral Resources Co., Denver, Colorado. The first speaker was Dale A. Eastman, President, Eastman, Griggs & Associates, Salt Lake City, Utah. Subject-"Professional Staffing for Mining Operations." Mr. Eastman received his Business Degree from Shadran State College in 1971. He was Head Coach in basketball and football in Lyman, Wyoming, prior to joining Bectel. With Bectel five years in training, development and staffing. Was Director of Construction Administration for Southwest, United States, Bectel Power Division prior to entering the Executive Search Division. Currently President, Eastman, Griggs & Associates and also Vice President of E&B Investments and Managing General Partner Duffers Ltd. (See Index for printed text of Mr. Eastman's paper.) Mr. George J. Miller, Attorney, Dechert Price & Rhoads, Denver, Colorado, was the second speaker. Subject-"Rail Transportation After Staggers Act."

Jan 1, 1981

Chairman: Mr. R. C. Heers, Project Manager, Kaiser Company, Inc. CHAIRMAN HEERS: Fellows, I can't say it gives me a lot of pleasure to call this meeting together because I would rather somebody else had the job. I haven't anything to say this morning and I think the sooner we get started with the fellows that have something to say, the better pleased everybody will be. The first speaker this morning is Mr. John Griffen of the McNally Pittsburgh Company. He has a talk on coal preparation and I am pleased to present Mr. Griffen.

Jan 1, 1947

MR. STROUP: As soon as the mine workers realize that machine loading is going to be with us permanently, they will gradually accept the view that they, as well as the Mine Operators, will be in the end better off. Don't you find that to be true? MR. BUTLER: I do find that the antagonistic feeling that prevailed at the start is getting less and less and that the miners are co-operating with us. The machine is going to stay with us and I believe it is going to be better for them because instead of having the hard work of heaving coal, they will merely run the machinery that heaves the coal for them. I believe they all feel that way about the matter. MR. McAULIFFE: Mr. Farnham, out of his professional diplomacy, was very careful not to even mention his own machine by name. I would like to say a word about salesmen and about the men who develop the machines. They are perhaps doing more for the industry than we are doing ourselves. This applies also to the railroad business that I put a great part of my life in. If it were not for the energy, courage, and ingenuity of the men who manufacture machines, we would not occupy the advanced position we do today in the mining world.

Jan 1, 1924

President Ziolkowski called the meeting to order at 9:30 a.m. He called on the Auditing Committee to give its report. Jack Leech read the report and asked that it be approved. A motion was made, seconded and approved. The Resolution Committee was asked to give its report. The following was submitted: (1) RESOLVED, WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the Coal Mining Industry have suffered the loss through death of the services of the following: James A. Flint John L. Paynich Joseph E. Ward NOW, THEREFORE, BE IT RESOLVED, that there be spread upon the minutes of The Rocky Mountain Coal Mining Institute recognition of the passing of these members, who have so greatly contributed to the advancement of the industry, both nationally and in the Rocky Mountain area, and that a copy of this resolution be sent to the next of kin as evidence of the sincere regard and sympathy of the members of the Institute.

Jan 1, 1981