Search Documents

The Bendigo Goldfield is AustraliaÆs second largest goldfield, having produced 22 million ounces of gold between 1851 and 1954. Development of the modern decline mine, initially for underground exploration and bulk sampling, commenced in 1998. The project is targeting new reefs below and along from historic workings beneath the city of Bendigo. The major technical challenge for the project is the inability to solely use drill core gold assays to estimate the grade of reefs, due to the coarsegrained nature of gold mineralisation, known as the nugget effect. In 2002, a program of bulk sampling commenced, resulting in the development of factors for converting drill hole grades to in situ reef grades. In mid 2006 commercial production commenced following the construction of a 600 000 t/yr processing plant adjacent to the Kangaroo Flat Mine portal, with plant feed being derived from four reefs in the Sheepshead and Deborah lines of reef. In early 2007 it became clear that the initial ore reserves had been overestimated, leading to an immediate change of strategy from production to exploration. A cash conservation program was also put in place. Exploration refocused onto the more historically productive Garden Gully and New Chum lines of reef, whilst a new grade estimation tool based primarily on the visual assessment of drill core was implemented. Immediate exploration success occurred with the discovery of four reefs in the Garden Gully line in early 2007. Successful step-out drilling during the year led to the decision to undertake trial mining in Gill reef. Trial production commenced in June 2008 and includes the processing of discrete ore blocks and the introduction of selective mining techniques. This paper examines the steps that have been taken to refocus exploration and to gain confidence in new exploration results, particularly through the visual grade estimation technique and assessment of trial mining Gill reef on the Garden Gully line. In addition, project factors relating to human skills, community relationships and financial management in a dynamic external environment are also addressed.

Jan 1, 2009

Drilling is one of the most, significant cost components of any stoping or develop- ment operation. Two of the factors contri- buting to the drilling cost are the supply and servicing of consumable items such as drill rods and bits. The purchase cost of consumable items can be controlled to a large extent by using the correct balance of quality and price. However, the service cost is a less easily controlled factor and it is in this area where potential savings are significant. In June, 1976 a six month trial period was commenced at The Zinc Corporation, Limited and at New Broken Hill Consolidated Limited with two separate suppliers supplying and ser- vicing all longhole drilling parties (one supplier for each mine) at a guaranteed cost per metre. As a result of this six month trial period a new contract was commenced in December, 1976 with one supplier supplying and servicing all longhole drilling parties at both ZC and NBHC for a twelve month period. This concept has now been in operation for over twelve months and has proved to be a significant means of slowing down the increas- ing cost associated with drilling operations.

Jan 1, 1977

By K Vallo, T Haimi, J Pihlasalo, J Hamuyuni, M Lindgren, F Tesfaye

Decarbonisation of the steel industry has recently attracted a lot of research and technological development. Most of the technological developments are centred around the replacement of blast furnace (BF), which has been the main primary smelting furnace in the ironmaking step of steel production. Replacement of the BF is not an easy task because of BF’s many established capabilities over the years, especially its ability to use low-grade iron feed. In this regard, Metso has developed its own technology, Metso’s Outotec direct reduced iron (DRI) smelting furnace, to tackle this problem. The recently developed six-in line electric furnace for DRI smelting can be used for primary smelting of DRI from blast furnace grade iron ore. Unlike the electric arc furnace (EAF), the DRI smelting furnace can handle larger slag volumes that emanate from the high gangue in BF grade DRI. Therefore, fluxing plays an important role in operating the DRI smelting furnace. This paper presents fluxing options and proposes slag quality and operating windows for the DRI smelting furnace. Also, the effect of slag on refractory durability will be discussed.

Jun 19, 2024

By O J. Restrepo Baena, S Nowosad, R Webber-Youngman, N Mojtabai, P Foster, A Binder, S Hazuria, erson, S Raval, L Liu

As the mining industry faces times of change, new challenges arise to ensure raw material supply for the younger and future generations. Different scenarios are currently shaping the way we mine and teach mining engineering. Led by an increasing demand for raw materials, net zero requirements for improving long-term operation performance, technological advancements such as automation and digitalisation, safety improvements, environmental considerations and a need for social acceptance, mining is pursuing to change and adapt to these requirements at a faster pace. Such changing times raise new concerns, one of the most relevant is the lower number of students interested or enrolling in mining engineering and related fields leaving mining engineering as one of the less preferred career options between the younger generations. Nonetheless, it is essential to continue addressing and supplying the skill sets that is suited to contemporary and future of the mining industry. To this end, globally, academia is currently undergoing several initiatives such as curricula updates and adaptation, up skilling, improving teaching practices and techniques, including e-learning techniques, enhancing industry-academia and inter-university collaboration, and much more

Sep 1, 2024

Green policies have gained momentum since the 1972 Stockholm Environment Conference. The environmental movement has influenced political initiatives both in New Zealand and abroad. Governments and international institutions have addressed local, regional and global environmental issues with varying degrees of success. New Zealand so far has not supported the United Nations' call for sustainable development in a,consistent manner.New institutions and new rules for resource management mean there are opportunities to look after the land in different and more ecologically sensitive ways than has happened in the past.The increasing influence of regional councils in resource management planning will have important implications for mining and mineral exploration. These trends are discussed and possible future events outlined.

Jan 1, 1990

By J Kwiri, T Zvarivadza, R Mitra, F Cawood

It is crucial to record ground movement of any magnitude to enable the safe and economical design of excavations and infrastructure. The DigiMine Laboratory is equipped with technologies to record such movements. This paper analyses the effectiveness of the Digital Mine instrumentation in recording earth movements in light of the Botswanan earthquake which occurred on the 3rd of April 2017 at 17:40 UTC. Recordings from the Digital Mine are compared with other ground sensing technologies which also captured the event (USGS and GEOFON systems). USGS and GEOFON system’s recordings suggest that, there are a number of possible mechanisms that could have resulted in the earthquake as discussed in the paper. Compared to the USGS and GEOFON systems, DigiMine system could not provide an analysis that could give possible source mechanisms. However, the system’s success in recording the Botswanan earthquake, is an indication that the system works and can be further developed or improved. For a comprehensive analysis, more data from various sensors needs to be collected. For example, DigiMine connecting to the national seismic monitoring system or to the local mine’s seismic monitoring system. Such connections will enable the development of a better self-analysis system and possibly prediction of future events. More importantly, it will contribute to better understanding of regional seismicity and its potential impact on excavation design. CITATION:Kwiri, J, Zvarivadza, T, Cawood, F and Mitra, R, 2018. How efficient is DigiMine technology in recording earth movements? A look at the Botswanan earthquake, in Proceedings The Fourth Australasian Ground Control in Mining Conference (AusRock), pp 414–419 (The Australasian Institute of Mining and Metallurgy: Melbourne).

Nov 30, 2018

Over the past seven years, a combination of New Zealand-, Australian- and German-led research voyages using the research vessels Tangaroa, Southern Surveyor, and Sonne respectively, have revolutionised our understanding of the Kermadec-Tonga arc-backarc systems. This convergent margin is the most seismically-active subduction zone system on Earth with convergence rates steadily increasing northwards from the Hikurangi Trench to ~250 mm/year at northern Tonga. In combination with the intra-oceanic setting, factors potentially producing magmatic, tectonic, and hydrothermal variability in this system include an increase in potentially subductable sediment northwards along-strike, intersection of the Louisville Ridge (hot-spot chain) and Osbourn Trough (paleo-spreading centre) with the arc at ~25¦S, and the possibility of Samoan (hot-spot) plume ingression in the northern Lau Basin. The bulk of the magmatism is submarine; whereas only a few emergent (some transient) volcanic islands exist, about 80 submarine volcanic centres of significant size (>1000 m above surrounding sea floor) are present between White Island in the south to north of Tafahi in Tonga. About 35 per cent of these centres are hydrothermally active. Important petrogenetic features of the volcanic rocks along this arc system are the abundance of rhyolite (some quartz-amphibole-bearing), and the outcrop of primitive olivine-clinopyroxene-phyric basalts in satellite cones of the major edifices. Many of the edifices consist of complex caldera systems. Eruptions from and degradation of these edifices were probably tsunamigenic. Many of the hydrothermal systems developed within the edifices are likely destroyed during the sector collapses which are the characteristic edifice degradation mode. There are three backarc spreading systems along this margin: the Havre Trough, Valu Fa-Eastern Lau Spreading Centre, and the nascent Fonualei Rifts. The latter are particularly notable in having captured the entire suprasubduction zone magmatic flux for a distance of about 150 km, shutting down the adjacent volcanic front arc volcanoes.

Jan 1, 2005

By S Meffre, A E. Fallick, K Zaw, I T. Graham, G Giuliani

Dispersed gem corundum is mined from placers, commonly from basalt fields, as occurs along eastern Australian and Asian continental margins. New laser ablation inductively coupled plasma mass spectrometry analysis (LA-ICP-MS) of Australian corundum allows genetic distinctions among these suites and gives clues to their primary lithospheric sources prior to basaltic delivery. Bimodal corundum suites at Barrington Tops, Cudgegong-Gulgong-Macquarie River and Yarrowitch, New South Wales (NSW), include lower Ga, higher Mg æmetamorphicÆ and higher Ga, lower Mg æmagmaticÆ groups. The Barrington Tops æmetamorphicÆ corundum is more Fe-rich (av 4500 - 7100 ppm) than Cudgegong- Macquarie River equivalents (av Fe 1800 - 2100 ppm). Yarrowitch corundum is relatively low in Fe, Ti and Cr. Along with other eastern Australian data (north-east Tasmania; New England, NSW) and from gem fields elsewhere, the combined trace element and O isotope data, reveal considerable geographic and genetic variations within the corundum suites. A few corundum groups contain noticeable Be, Sn, Ta, Nb, a particular genetic message that also precludes easy distinction of treated corundum in the gem trade. Expanding geochemical, inclusion and geochronological data on gem corundum hold promise for characterising derivative gem corundum on both geographic and genetic features.

Jan 1, 2008

In mid-1998 Atlas Copco Rock Drills AB introduced the first member of a new family of drill rigs. This new family, Rocket Boomer L1C/L2C/L3C, is based on modern computer technology and also on what is characterised as information technology. The design of the drill rigs are modularised both in hardware as in the software. This means that the functionality of the drill rigs is upgradable step by step. Added upon the basic drill rig functions are the new options as ABC Regular (known also as Contour Control), ABC Total, drillplan generator and communication products. The main objectives of these functions are to facilitate real quality drilling.

Jan 1, 2003

By P Cheluszka, M Jaszczuk, P Sobota

This paper refers to a new idea of stereometry of cutting drums of longwall shearers designed to get medium and hard to mine coals. A new way to place picks on a drum enables to readjust a number of picks being in contact with the body of coal to shearer haulage speed. Owing to this a remarkable increase in depth of a cut within the low range of haulage speed has been obtained. On comparing operating characteristics a considerable reduction in the specific energy consumption has been shown when using the units machined as per the new idea, in comparison with the units produced in series.

Jan 1, 2003

By Rogers J. F, Bird A. C

The establishment of vegetation for dust control on tailings dams at The Zinc Corporation, Limited and New Broken Hill Consolidated Limited (ZC/NBHC) is outlined. The evolution of practices and techniques employed is described and the problems encountered are discussed.

Jan 1, 1983

Problems encountered in the design, construction, acceptance, commissioning and early operation of the electrolytic zinc plant at Port Pirie are reviewed. Recommendations based on the author's experience are made for proper control of each phase of the development of new plants.

Jan 1, 1971

By Trendell B

While objective selection and assessments are an accepted part of employing managers and other staff, they have had only a limited place when selecting mineworkers in Australia. Wambo Mining Corporation has used occupational testing as part of its recruitment process since 1994. For managers and staff in particular, it is considered this has contributed significantly to a 95 % fit of those appointees. In 1997 when Wambo undertook development of a new "on site" subsidiary underground mine called Wollemi Services, they wanted to select the most appropriate people in terms of skill and on the job performance. To achieve this they reviewed and improved their recruitment processes to facilitate selection and transfer of an initial intake of almost 50 staff and mineworkers.One of the issues for Human Resource Management was to provide an environment where employees could let go of previously held (but not necessarily individually believed) entrenched views about individual performance and assessment. It needed to be emphasised that performance could be objectively and fairly assessed. More importantly, the performance being assessed was the application of skills and that new skills could be learnt and individuals could choose to change Behaviour.

Jan 1, 1998

Over the past 5 years, Bougainville Copper Limited has undertaken a number of major plant expansions to the copper concen- trate production plant at Bougainville in the North Solomons Province of Papua New Guinea. These projects have scheduled three additional ball mills, three new banks of Outokumpu flotation cells, four additional tertiary screens, two additional tertiary crushers, and more recently four high capacity 24.5m dia. tailing thickeners. The value of the five separate projects totalled more than A$100 million. A requirement of commissioning and bringing on line of each of these projects has been to minimise both operational losses and copper concentrate production. The commissioning has been successfully implemented by detailed planning of the commissioning work in conjunction with the plant operation. Planning has been detailed for each man involved on an hourly basis, highlighting the work required on each commissioning task that is to be undertaken and the time expected to achieve activity Completion.

Jan 1, 1986

The use of systematic review methods, derived from System Safety approaches used in the North American nuclear power industry, have become an accepted approach for seeking "approval" for new coal mining equipment and operational changes in NSW. Based on risk analysis, they provide a valuable and needed framework for the reduction of losses related to people, equipment and production.

Jan 1, 1991

By P Nissen, T Jenke, M Ralph, M Cattani, M Quinlan

The West Australian Government hold an annual ‘Mines Safety Roadshow’ around the State’s regions and the capital city, Perth. Each year presenters provide an update on legislation and safetyrelated themes. A recurring theme is the mining industry fatality rate. Professor Michael Quinlan’s ‘Ten Pathways to Death and Disaster’ (Quinlan, 2014) has been referenced regularly to assist in structuring workshops and conversations concerning fatality prevention in the mining industry. The ‘Ten Pathways’ are the outcome of an analysis of fatal injuries in the mining industry, which identified a series of common themes to the fatalities: Pathway 1: Design, engineering, technical and maintenance flaws. Pathway 2: Prior warnings or causes for alarm ignored. Pathway 3: Failures in risk assessment. Pathway 4: Failures in management systems and hazard management plans. Pathway 5: Failures in auditing. Pathway 6: Economic pressures compromising safety. Pathway 7: Failures in regulatory oversight and inspection. Pathway 8: Worker and others expressing concern prior to the incident. Pathway 9: Poor management – worker communication and trust. Pathway 10: Emergency and rescue resources and procedures. To determine a fatality risk profile we asked participants at the Mines Safety Roadshows to indicate their perception of their employer’s performance in each of the Ten Pathways. We administered the questionnaire at the Mines Safety Roadshows in 2017, 2018, 2019 and 2023. In this paper, we report on the results of the questionnaires, and suggest how organisations can improve their fatality risk score.

Apr 16, 2024

By M Matheson

Increasingly, owners and operators of underground mines that have a long history are realising the economic and practical advantages of capturing historic mining records and converting hand drafted plans of underground mine workings into an electronic collection of attributed 3D wireframes that can be used for mine planning and exploration purposes. This case study looks at the conversion of historic data to 3D models, with examples from three historic mining operations where this task has been undertaken: West Wits gold projects in South Africa, Northern MiningÆs Radzimowice gold mine in Poland and Avalon ResourcesÆ Viscaria copper mine in Sweden. West Wits Mining Limited holds leases in the West Rand Goldfield of the Witwatersrand Basin, which has significant gold and uranium resources that have been mined since the 1890s. The Radzimowice Gold mine, Poland, hosts Au-Cu-As-Ag mineralisation that has been exploited since the 15th to 16th centuries. The Viscaria Copper mine is located in northern Sweden and was operational during a 15 year mining period to 1997. The process of data collection, management and modelling is inherently challenging for these mines; specifically, collation of historical information, organising this data into logical arrangements that could be validated and sequentially creating 3D models using geo-spatial computer software. Despite the challenges and costs involved in creating a digital 3D model, the conversion has added significant value to each project through identifying areas of potential new resources, aiding planning and presentation to stakeholders. This paper outlines the processes involved in conversion from paper records to a 3D model, the challenges encountered and how these can be overcome, and importantly, the practical and economic advantages of undertaking such a task for explorers, miners and investors.

Jan 1, 2009

By N N. Viswanathan, D Kumar, S Kumar

In secondary steelmaking, calcium treatment is practised to modify the solid alumina or spinel inclusions into liquid or partially liquid calcium aluminates. It has been seen that the dissolved calcium reacts with sulfur or oxygen present in the steel to form CaS or CaO type of transient inclusions. Post-calcium treatment these transient inclusions further react with pre-existing alumina or spinel inclusions and modify them. In addition, direct modification of pre-existing inclusions is also reported in the literature. In the present study, laboratory-scale induction furnace-based experiments are carried out to melt electrolytic iron in an alumina crucible followed by deoxidation with aluminium. The CaS-based composite material, prepared in-house, is added after the aluminium deoxidation to study the stability of CaS at the steelmaking temperature. Multiple steel samples were also taken to track the dissociation of CaS by means of sulfur pick-up in steel. Additionally, inclusion analysis of these steel samples was also performed to track changes in the chemical composition of inclusions in response to CaS addition. It has been seen that the CaS dissociates leading to a gradual pick-up of sulfur in steel. The scanning electron microscope – energy dispersive X-ray spectroscopy (SEM-EDS) analysis reveals that the alumina crucible and floated alumina inclusions are modified into calcium aluminates and the extent of modification depends on the contact time of CaS with the two sources of alumina mentioned earlier. However, the modification of alumina inclusions in the bulk steel did not occur during these experiments.

Jun 19, 2024

The End of the Line for Roadway Development By Michael Kelly, CSIRO Exploration & Mining Michael Kelly highlighted that roadway development performance remains one of the threats to expansion of Australia underground coal exports to the growing Asian market. In a recent industry study, automation was highlighted as one of seven strategies for roadway development improvement. Growing Asian markets The expansion of the Asian coal market is a long term driver for expansion of the underground coal industry in Australia - if significant productivity improvements are made. Imports of steaming coal by Asian APEC members are predicted to rise by from 150 MT to 190 MT. Australia is one of the few countries which has a potential capacity larger than predicted internal needs. Predictions are for exports of black steaming coal from Australia to increase from 50.3 MT in 1992 to 106.3 MT in 2010. To meet this prediction, an investment of $10.7 billion (in 1992 dollars) will have to be made in mining and transport facilities. This is equivalent to the opening of a major new mine each year until 2010. Many of these mines will be underground operations. However, much of Australia's capacity to respond to increased Asian demand will depend on its ability to develop underground technologies and improve productivity. The inability to make sustained improvements in roadway development rates has to date been one of the main reasons why new underground projects have failed to deliver the expected returns.

Jan 1, 1997

By D A. Collins

The floatability methodology developed by the AMIRA P9 project through research contributions by the Julius Kruttschnitt Minerals Research Centre (JKMRC, Brisbane, Australia), University of Cape Town (UCT, Cape Town, South Africa) and McGill University (Montreal, Canada) has been successfully commercialised through JKTech. The methodology involves detailed flotation plant campaigns which require large quantities of data to fit models that can be used in JKSimFloat (a steady state simulator for the flotation process). The methodology to date, although widely accepted as the best flotation optimisation technology available, is limited to existing circuit optimisation and requires full plant or pilot plant data to calibrate new models. The floatability of new ore types cannot be characterised using this method unless a pilot campaign is undertaken. After reviewing a large database of existing industrial floatability data, a new methodology is proposed that involves a laboratory based flotation test procedure and review of the floatability database to characterise the floatability of new ores. The full methodology is labelled the floatability index test procedure (JKFIT). This paper outlines the JKFIT procedure and the results of applying this methodology to pilot plant data from a copper ore. JKFIT was applied to two different feed sizes (namely a P80 of 180 microns and 212 microns) of this copper ore. The results of applying JKFIT to this case showed that the metallurgical response (in terms of grade and recovery) from the full pilot plant survey data could be predicted well. Further validation of this methodology was conducted on a separate copper ore. The results from this validation also showed that the JKFIT test was able to be used to predict the full plant performance. The JKFIT test has the potential to become the 'drop weight' test of flotation which will improve the confidence in plant design flow sheet layouts, allow full orebody characterisation and prediction of key grades and recoveries before the ore enters the plant, and will provide an improved methodology for chemistry impact analysis on different ores.

Jan 1, 2008