Search Documents

By Luis Alberto Sfalsin Passos

A aglomeração de minério de ferro para formação de pelotas é um processo dinâmico e seu controle é complexo. No controle manual o operador local é responsável pelos ajustes no processo e o tempo e a proporção de suas atuações dependem da percepção de cada um. Logo, o controle manual do processo é feito de forma individual e não padronizada e frequentemente não atende satisfatoriamente o controle da taxa de crescimento da pelota crua. Este artigo apresenta uma alternativa de controle automatizada, padronizada e otimizada da taxa de crescimento da pelota crua nos discos de pelotização. O “Sistema de Controle Avançado de Processo”, denominado SCAP, consiste em um controle multivariável baseado em ferramentas de controle convencionais e lógica nebulosa, que simula o pensamento humano nas tomadas decisão. As regras foram construídas e fundamentadas em conhecimentos previamente adquiridos por especialistas do processo. Verificou-se após a implantação um aumento do desempenho do processo produtivo. No âmbito das melhorias, destacam-se: redução de pelotas fora da especificação (granulometria), redução do consumo de insumos (agentes aglomerantes, gás natural, entre outros), melhoria na qualidade do produto final e aumento da produtividade.

Aug 1, 2018

By Lucas Ladeira Lau

A legislação ambiental vem se tornando mais restritiva em diversos setores industriais. Isto não tem sido diferente para o setor siderúrgico. Com a inclusão de limites de emissão de elementos traços nas legislações ambientais mundo afora, este tema vem ganhando importância. É conhecido que a qualidade das matérias-primas utilizadas nos processos siderúrgicos pode interferir nos impactos ambientais de seus processos. No caso do processo de sinterização, a presença de elementos traços está ligada a composição de sua carga. Com o objetivo de determinar quais elementos irão compor as emissões atmosféricas, resíduos, efluentes e produtos faz necessário estudar o modo de ocorrência dos elementos traços em cada insumo. A interação entre as propriedades de cada elemento e as condições de massa e termodinâmicas permitem o estudo de seu comportamento e partição. Assim, o objetivo deste trabalho é levantar o estado da arte da sinterização de minério de ferro e suas emissões, estudando a origem, o comportamento e a partição de elementos traços e radionuclídeos, quando submetidos às condições do referido processo.

Aug 1, 2018

By Sérgio Wilibaldo Garcia Scherer

O Balanço Energético Nacional do MME informa que em 31/12/2012, o carvão mineral representa 73% dos recursos e reservas nacionais de energia fóssil. A partir de 1960 foram realizados estudos e experiências que resultaram na implantação da Aços Finos Piratini (AFP), uma mini usina integrada para aços especiais pela rota tecnológica “Redução Direta a redutor sólido / Aciaria Elétrica”, na cidade de Charqueadas/RS. A unidade Sl/RN (forno rotativo) operou de 1973 a 1990, com carvão local com até 35% de cinza. O processo atraiu a atenção mundial: em 1974 foi feito um teste industrial bem sucedido com linhito briquetado alemão; em 1975 o ILAFA realizou em Porto Alegre seu Seminário Internacional sobre Redução Direta; equipes da África do Sul e da Índia foram treinadas na AFP. A Índia é atualmente a líder mundial na produção de ferro esponja a carvão. O trabalho apresenta um modelo de usina integrada, autosuficiente em redutor e energia elétrica, à base de carvão não coqueificável, produzindo tarugos. Além disso, apresenta outras possibilidades de emprego do carvão mineral nacional em siderurgia, tais como a injeção de finos nos altos fornos e seu emprego no processo COREX. As perspectivas futuras estão delineadas em documento do Centro de Gestão e Estudos Estratégicos (CGEE) do MDIC, que coloca metas para 2022 e 2035.

Aug 1, 2018

By Jan Krull

A high productive coke making process in connection with stringent emission control has clearly become a demand of plant operators and stakeholders. Further to this, availability, quality and coal costs are key concerns for the iron and steel industry in its efforts to optimize raw material cost. Today, the optimization of raw material cost in integrated steel works has further gained priority. Coking coal reflects up to 20% of the cost of steel. In top charged batteries coal preparation and blending is one of the concerns to lower coal cost by maximizing the percentage of non-coking coals in the blend. Stamp charging technology is technologically and economically an effective solution in the process of pre-carbonisation. Paul Wurth’s jumbo top charged oven as well as proven stamp charging technology have recently set new benchmarks in Europe, India and Brazil in terms of productivity, stability and emission control.

Aug 1, 2018

By Paulo César Lemes de Almeida

No projeto da usina da VSB, em Jeceaba – MG estão contemplados dois altos-fornos de 350 m3 de volume útil e uma máquina de lingotar gusa (MLG) com capacidade de 150 t/h. Um destes altos-fornos já está pronto para o início de operação. Visando realizar os testes a quente da MLG a aciaria da VSB tem produzido aço com alto teor de carbono para testar o equipamento. Realizaram-se 07 etapas de testes que possibilitaram a implantação de algumas melhorias na MLG, coletar dados sobre a logística de movimentação de panelas, estimar perdas térmicas do gusa e treinar o pessoal para a operação. Nesta contribuição técnica descrevem-se os testes realizados e as modificações decorrentes.

Aug 1, 2018

By Gilvandro Bueno

Os controles dos processos de cominuição estão normalmente associados à redução de granulometria e geração de superfície específica, usualmente utiliza-se peneiramento para medição de granulometria e permeabilímetro de Blaine para superfície específica, estes métodos são largamente utilizados para este fim. O método on line por difratômetros a laser também pode ser empregado para estas medições na indústria, como se trata de uma tecnologia recentemente adaptada para ao processo de Pelotização, foi necessário validar o equipamento e determinar equações de correlação de leitura com os equipamentos existentes. O trabalho consistiu em realizar uma série de amostragens cujas amostras foram analisadas no equipamento industrial a laser, em seguida analisadas em laboratório. As equações de correlações obtidas foram inseridas no equipamento industrial de medição on line por laser tornando a leitura familiar aos obtidos pelas análises de laboratório, onde foi possível garantir confiabilidade para tomadas de decisões.

Aug 1, 2018

By Bruno Deves Flores

A aplicação e viabilidade de uso de aglomerados constituídos de carvão e minério de ferro, denominado Ferro-Coque, vêm recentemente sendo proposta como alternativa inovadora para a redução das emissões de CO2 e consumo de energia no alto-forno. No presente estudo visou-se investigar o comportamento de carbonização de aglomerados produzidos a partir de 3 diferentes carvões e minério de ferro. Briquetes de carvão/minério foram produzidos em laboratório. Esses briquetes foram submetidos à carbonização em forno laboratorial e em termobalança. As amostras de Ferro-Coque produzidas foram caracterizadas via microscopia ótica e eletrônica. Realizou-se também a caracterização mecânica dos briquetes através de ensaios de compressão e tamboramento. Os experimentos termogravimétricos permitiram uma avaliação detalhada das perdas de massa devido a cada uma das etapas de carbonização. As características morfológicas revelaram diferenças importantes entre os diferentes briquetes testados. A resistência mecânica dos briquetes mostrou uma dependência importante, com a temperatura e tipo de carvão utilizado.

Aug 1, 2018

By Companhia Siderúrgica Nacional - CSN

Balanço Energético Global 2013

Jul 31, 2018

By Roberto Balarini Junior

Tribological behavior of Si3N4 balls sliding against Al2O3 discs in water was investigated by studying the influence of parameters such as initial surface roughness and circular axial run-out of the discs. The objective was to relate these parameters with the occurrence of the phenomenon known as ultra-low friction coefficient (ULFC), which is characterized by µ < 0.01, including the correlation with running-in duration. As a general trend, greater initial surface roughness and circular axial run-out resulted in greater running-in duration. In addition, it was verified that a mixed lubrication regime (hydrodynamic and boundary) is required to guarantee the occurrence of ULFC by comparing the calculated minimum film thickness with the composite roughness of the worn surfaces. Also, ICQ-OES analysis of the water after the tests indicated that a silicon concentration greater than 1.3 mg/l should be fundamental for the occurrence of µ < 0.01.

Jul 31, 2018

By Luiz Henrique Accorsi Gans

First, this works carries an experimental evaluation for austempered ductile iron (ADI) as a gear material. And second, in order to provide a better understanding of the microstructural effect on the stress state of subsurface regions, a finite element method approach was considered using the submodeling tool in ANSYS 11.0. For this, ADI gears were produced from continuous cast iron bars, heat and thermochemical treated and tested in FZG test rig. The results were compared to those of carburized steel AISI 8620 and induction hardened steel AISI 4140 gears. The wear experiments were performed at the temperature of 90ºC with two torque stages: 135 N.m (running-in) and 302 N.m (steady-state). The time for pitting and spalling on the gears surfaces were measured using image analysis. The results showed a very good potential of using ADI for manufacturing gears, replacing induction hardened steels. Also, the ADI gear with smaller nodules showed higher life for pitting. In contact fatigue tests with severe load, the carburized AISI 8620 steel proved more adequate than the austempered ductile iron, showing that the mechanical properties are critical in the resistance to damage in gear contact. The austempered ductile iron with smaller nodule size showed to be very competitive with wear resistance similar to AISI 4140 steel induction hardened. With ANSYS, it was verified that the nodule size affects the gears life independently of the mechanical properties of the matrix. The results showed that the nodules indicate the presence of a concentration stress, but their size doesn’t affect the contact fatigue life as much as the total amount of nodules, regardless of the ductile iron microstructure. The size and number of nodules affects both the nucleation and the propagation stage of cracks. ADIs with higher amount of nodules have a greater wear resistance. Also, compared to the Hertz contact theory (isotropic material), the presence of graphite nodules indicates a non-isotropic material and made the maximum shear stress point moves toward the surface.

Jul 31, 2018

By ArcelorMittal Tubarão - Aços Planos

Fatos Relevantes - Produ&ccedil;&atilde;o anual de 4.491.854 t de a&ccedil;o bruto - produ&ccedil;&atilde;o est&aacute;vel em rela&ccedil;&atilde;o &agrave; 2012. - Produ&ccedil;&atilde;o anual de Bobinas Laminadas a Quente de 3.726.871 t - 7,8% de eleva&ccedil;&atilde;o em rela&ccedil;&atilde;o a 2012. - Unidades Geradoras da Central Termel&eacute;trica em manuten&ccedil;&atilde;o aproveitando per&iacute;odo de menor produ&ccedil;&atilde;o relacionado &agrave; parada do Alto Forno 3. - Redu&ccedil;&atilde;o relevante na gera&ccedil;&atilde;o de energia el&eacute;trica interna devido menor disponibilidade de combust&iacute;veis (off-gas) e redu&ccedil;&atilde;o de produ&ccedil;&atilde;o na Sol Coqueria adequando &agrave; demanda de coque do grupo ArcelorMittal Brasil.

Jul 31, 2018

By Johann-Paul Stemplinger

For lubrication of open gear drives applied in rotary furnaces, often gear greases are used as well as for lubrication of gear boxes in difficult sealing conditions. The selection of the gear grease influences strongly the wear behavior. Investigations with flow greases NLGI 00 were made in a back-to-back test rig determining the weight loss due to wear acc. to the standardised procedure ISO 14635 part 3. Different influences like base oil viscosity, thickener type and additional solid lubricant type were analysed. Only the type and amount of solid lubricant shows a significant influence on the weight loss due to wear. Finally, a linear wear coefficient clT according to the calculation method of the wear amount according to Plewe is derived and can be used to transfer the test results to any gears in practice.

Jul 31, 2018

By Usiminas -. Ipatinga e Cubatão

Objetivo: Apresentar o Balan&ccedil;o Energ&eacute;tico Global da Usiminas em 2013 - Usinas de Ipatinga e Cubat&atilde;o, com os principais indicadores de consumo das &aacute;reas produtoras. Al&eacute;m dos indicadores energ&eacute;ticos globais, o balan&ccedil;o apresenta os consumos f&iacute;sicos espec&iacute;ficos de cada insumo nas diversas &aacute;reas, permitindo a an&aacute;lise de cada setor das Usinas, isoladamente. Metodologia: Foram elaborados gr&aacute;ficos com indicadores de consumo energ&eacute;tico por um per&iacute;odo de cinco anos, bem como a distribui&ccedil;&atilde;o percentual nas &aacute;reas produtoras. Nestes gr&aacute;ficos, &eacute; evidenciada a evolu&ccedil;&atilde;o dos indicadores ao longo dos anos. &Eacute; tamb&eacute;m apresentada justificativa para a varia&ccedil;&atilde;o do indicador em rela&ccedil;&atilde;o ao ano anterior. Resultados: O trabalho apresenta an&aacute;lise das Usinas de Ipatinga e Cubat&atilde;o em rela&ccedil;&atilde;o &agrave; evolu&ccedil;&atilde;o do consumo energ&eacute;tico e sua distribui&ccedil;&atilde;o percentual nas &aacute;reas produtoras.

Jul 31, 2018

By Wilian da Silva Labiapari

Austenitic stainless steels are widely known for their good weldability, excellent mechanical properties for deep drawing and superior corrosion resistance in environments where most of the metals fail. Their uses include many applications subjected to a combination of mechanical and corrosive wear, such as pumps, valves and surgical implants. Although their corrosion resistance has been largely investigated, their resistance to mechanical wear is less studied. In particular, their performance under conditions involving combined corrosive and mechanical wear is not well understood. The aim of this study is to demonstrate the effect of the mechanical component on the electrochemical signal of an anodic polarization curve. A test rig was developed to investigate micro-abrasion-corrosion using a fixed ball configuration. Tests were carried out using stainless steel AISI 304 samples and 25.4 mm zirconia balls as counter bodies. The electrolyte was a 1N H2SO4 solution with SiO2 as abrasive dispersed at the concentration of 10 wt%. The results showed an increase in current density when the counter face roughness and the normal load applied during the tests are increased, evidencing a mechanical influence on the surface activity of this material in a corrosive environment.

Jul 31, 2018

By José Divo Bressan

Present work examines material surface damage by cavitation erosion of metals or the wear phenomenon from water bubbles collapse near the metallic surface. Material surface damage by cavitation erosion is due to wear mechanisms of liquid micro-jets impingement and shock waves. Experimental cavitation in tap water was investigated, using the proposed new design of compact rotating disk equipment. In this device, a rotating disk with cavitation inducers and specimens fixed on it ran in tap water to provide cavitating flow at constant high speed of 47.9 m/s similar to service conditions in pumps and propellers. Two types of cavitation inducers in the rotating disk were investigated: through-holes and pins. Carburized cast iron, aluminum, brass and bronze specimens were tested in this device. The cavitation damage mechanisms were observed by scanning electron microscope. Surface damage in the specimens was measured by mass loss and plotted in graphs of mass loss versus running time. After 25 hours testing, the specimens surface showed pitting formation and mass loss. All specimens presented surface damage: pit diameter size was about 100 or 150 to 300 micron. In aluminum specimen, damages by burned pit formation and plastic deformation could be seen, however, the mass loss was lower than the expected, possibly due to alumina film formation. Present equipment had quite good test reproducibility when compared with results from literature.

Jul 31, 2018

By Fernando Nunes da Silva

Wear mechanisms of materials that constitute the equipments and operating parts in the pre-salt area during the production of petroleum and gas can include corrosion, corrosion-cavitation and corrosion-cavitation-erosion. In the laboratory, it is realizable, but at times it is inaccurate to reproduce or visualize some of these mechanisms due to the real complexities caused by hydrodynamic flows, and the physico-chemical and mechanical non-linearities. The main objective of this work was to study coupons of low carbon steel under laboratory conditions, such as corrosive, cavitative-corrosive (CO2) and corrosive-erosive (CO2 + SiO2), in a stirring aqueous saline solution (0 and 5.0 m/s) at two levels of temperature, with bubbling of gas (5.0 L/min) and contaminated with or without (2.5 % mass), by solids particles of SiO2. The surface of the coupons subjected to upstream flow (0° in a cylindrical generatrix of coupon), and downstream flows (180º) were analyzed by profilometry. The measurements of roughness and waviness of all coupons were statistically analysed using Statgraphics® Centurion XVI, at a confidence level of 95% and significant differences observed in some matrices were discussed.

Jul 31, 2018

By Giuseppe Pintaude

This study aims to evaluate the effect of specimen preparation on the dry sliding wear behavior of CA-6 NM stainless steel. Two different surface finishing manufacturing processes were applied: lapping and metallographic polishing. The wear tests were conducted in reciprocating ball-on-flat system, performed for two loads: 5 or 8 N. For all test conditions, hardmetal ball was employed as counterbody. The surfaces were evaluated using 3D interferometry technique to determine their surface roughness, including texture analysis regarding isotropy. Surface characterization results indicated the presence of texturing and preferential orientation, since the parameter Str was smaller than 0.5 for samples of both the studied conditions. Two distinct levels of isotropy evaluated through Str parameter were achieved: 0.13 for lapping and 0.3 for metallographic polishing process. It is clear from wear tests that the variation of average surface roughness is the key point for tribological behavior of CA-6 NM stainless steel.

Jul 31, 2018

By Luis Armando Espitia

AISI 410 martensitic stainless steel specimens were low temperature plasma nitrided at 400°C in a mixture of 75%N2:25%H2, during 20 h. Active screen technic was used to avoid any edge effect The nitrided case is composed of expanded martensite (a’N) and e-Fe3N iron nitride, whilst chromium nitride precipitation was avoided. Surface hardness reached 1275 HV0.01. The transverse microhardness profile shows a gentle hardness gradient with a NHT nitrided case depth of 28 µm. Nanoindentation tests were carried out in order to assess the hardness (H), the Young modulus (E), the H/E and H3/E2 ratios and the elastic recovery (We) of both nitrided and non-nitrided specimens. The cavitation erosion mass losses were measured as a function of exposure time. The results showed a decrease of 27 times of the mass loss compared to the non-nitride specimens. Wear rate decreased from 2.56 mg/h for the non-nitrided condition to 0.085 mg/h after nitriding. The increment in the elastic recovery and the higher hardness values are responsible for the greater cavitation erosion resistance exhibited by the expanded martensite. Such results showed that low temperature plasma nitriding and the formation of expanded martensite are effective to increase cavitation erosion resistance of AISI 410 stainless steel.

Jul 31, 2018

By Marjorie Benegra

This study aims to compare the wear resistance assessed in rubber wheel abrasion test of nickel aluminide coatings deposited by for Plasma Transferred Arc (PTA) and High Velocity Oxigen Fuel (HVOF) manufacturing, using the same raw material. A nickel aluminide powder was atomized and deposited on 316L steel plate substrate. After deposition, some specimens were submitted to a heat treating (1200 °C for 24 h followed by 760°C for 24 h). The coatings deposited using PTA developed different microstructures due to the incorporation of substrate elements, its performance was better than the HVOF coatings, although their Vickers hardness was similar. After heat treating, a significant variation in hardness and wear resistance was observed. For PTA specimens, there were decrease in hardness of 35%, while for HVOF ones this drop was approximately 20%. Nonetheless, the effect of thermal exposure in wear resistance was quite different: an increase of 21% was observed for HVOF coatings, while a reduction of 20% occurred in PTA ones. Microstructures modifications in PTA coatings were significant for their wear resistance. On the other hand, the reduction of porosity and sintering were responsible for a better performance of heat-treated HVOF coatings.

Jul 31, 2018

By Diogo Tenório dos Santos

This property has been studied to characterize the strength a metallic material exhibits when it is machined so it can be regarded as its typical behaviour. As such, it may even be considered as an intrinsic material property. It is usually measured by an index called Coppini index, which is expressed by the ratio between the removed mass of a cutting tool caused by wear when it is used for machining and its initial one for a certain set of machining parameters. In this investigation, the tests were therefore conducted by an established set of parameters, namely feed rate, cutting and depth rates, in which the same wear mechanism took place in both ferrous alloys: AISI 4140 and AISI 316 steels. They were chosen based upon their increasing ordinary machinability indexes. The initial and final mass of the cutting tool were measured by an analytical scale with 0.01 mg precision. Cylindrical rods of 50-mm diameter were machined and the CI indexes showed a remarkable difference between them: 0.080 for the first steel and 0.049 for the second one, i.e., AISI 316 steel presented better machinability than the first one. It was then possible to conclude that this method presents good results in terms of both reproducibility and adequacy for machine shop conditions and it may be applied in a foreseeable future, mainly for metallic materials that have rather low machinability indices.

Jul 31, 2018