Search Documents

Jan 1, 1927

Jan 1, 1930

[Mr. Jay Abbott Union Sply Co 7458 S Jackson St Littleton. CO 80122 Mr. Ronald H. AchZlger Midwest Rbr 6 Sply Co 6404 E 39th Ave Denver, CO 80207 Mr. Randy Acre Dorchester Coal C 9350 E Arapahoe Rd Englewood, CO 80112 Mr. Dell H. Adams Kenerco Corp 5480 Swanton Dr Lexington, KY 4051 Mr. Robert S. Affleck Anderson Mavor (USA) Ltd RD #1 Box 140-Lake R Bradford Woods, PA 15015]

Jan 1, 1984

The 76th Regular Meeting of The Rocky Mountain Coal Mining Institute convened at The Mark Conference Center, Lionshead Village, Vail, Colorado, and was in session at 9:30 a.m. A film-"Once Upon a Time" showing the stifling effect of unnecessary government regulations and the importance of protecting economic political freedoms was shown. Past President, Robert E. Murray, President, Western Division and Subsidiary Companies, The North American Coal Corporation, called the meeting to order. He introduced President Loren V. Linville, District Sales Manager, Industrial Products Division, Uniroyal, Inc. A biographical sketch follows: Loren V. Linville was born on December 29, 1925 on the family farm near Wiley, Colorado to Scott W. and Hazel Linville. He has one sister, a teacher in the public schools and a brother who is an optometrist in Gustine, California. Loren grew up in Lamar, Colo. graduating from Lamar High School in 1944 and spent the folllowing 2 years as a radioman in the US Navy. He graduated from Denver University in 1950 with a BS in Mechanical Engineering. On September 12, 1948 he married Norma. They have 3 children, Linelle, a teacher in New Mexico, Bruce an electronic technician in Colorado Springs and Kevin at home.

Jan 1, 1980

The 77th Regular Meeting of The Rocky Mountain Coal Mining Institute convened at the Marriott's Mark Conference Center, Lionshead Village, Vail, Colorado, and was in session at 10:00 a.m. Past President, Loren V. Linville, District Sales Manager. Industrial Products Division. Uniroyal. Inc., Denver. Colorado, called the meeting to order. He introduced President, Edward F. Ziolkowski, Senior Vice President and General Manager, Energy Development Company, Hanna. Wyoming. A biographical sketch follows: Ed Ziolkowski is a 1953 graduate from the Colorado School of Mines with a degree in Engineer of Mines. His mining career began with Pickands Mathers Company in Gogibic Iron Range in Northern Wisconsin and Michigan. In 1961 he joined Texas Gulf Sulphur Company as Shaft Mining Engineer for their Cane Creek Potash Project near Moab, Utah. After serving as General Mine Foreman. Mine Superintendent and General Superintendent at Cane Creek, he was transferred in 1969 to Green River. Wyoming as Project Manager of Texas Gulf Black's Fork Trona Development. In 1971 he joined Allied Chemical Green River Works, as Resident Manager. In 1972 he joined Energy Development Company, an Iowa Public Service Company Subsidiary, as General Manager of their Coal Development. He currently is Senior Vice President and General Manager of Energy Development Company, and serves on their Board of Directors as well as the Boards of several other subsidiaries. This past April he was elected to Iowa Public Service Company's Board of Directors. Ed, his lovely wife Pat and children live in Hanna, Wyoming. He has been a member of the RMCMI since 1973. Is a staunch supporter of his community and the mining industry.

Jan 1, 1981

By NA N/A

Jan 1, 1931

Jan 1, 1922

By Scott Dupont

Due to the scarcity of miners, and the necessity of decreasing the cost of mining, the Phelps-Dodge Corporation, Stag Canon Branch, at Dawson, [ ] New Mexico, decided to try, by various methods of mining, to increase the tonnage of coal mined per man, per day. With this in view, they first tried mining on a 250-foot face, maintaining the track at the face and using six to eight men shovel- [ ] ling. These men were able to aver age from ten to twelve tons each per, day when they were loading, but with

Jan 1, 1926

[Arsulich, Thomas Mechanical Engineer, S.A.E. House, Laramie, Wyoming Barrett, A. Lee joy Mfg., Co., Research Engineer, Franklin, Pa. Bartlett, Rulon Salesman, 265 S. Seventh East, Salt Lake City, Utah Beauchamp, Paul N Goodman Mfg. Co., Sales Engineer, 2509 S. Monroe, Denver, Colorado Boyle, J. J Mine Superintendent, Roundup, Montana ?Burnell, Patrick H Gebo, Wyoming]

Jan 1, 1950

[ ] Digital images of the highwall are taken from the spoils bench. Two images of the same highwall segment are are taken from two different locations. The resulting overlapping images are used to create a three-dimensional image of that section of highwall.

Jan 1, 2005

CLARK MOSELEY RMCMI PRESIDENT 1998-1999 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 95th Regular Meeting and Convention to be held June 27 thru June 29, 1999 Crested Butte, Colorado

Jan 1, 1998

Jan 1, 1957

The 65th Regular Meeting of the Rocky Mountain Coal Mining Institute convened at the Stanley Hotel, Estes Park, Colorado, and was in session at 10:00 a.m. The first session was called to order by Past President Joe T. Taylor, Kaiser Steel Corporation, Palo Alto, California. Manager of the Stanley Hotel, who welcomed the guests to the Stanley. After a few remarks, he introduced Bob Dean, for- mer Manager of the Stanley Hotel and again associated with the Stanley, who also made a welcoming talk as Mr. Dean has hosted the Institute at the Colorado Hotel in Glenwood Springs and in Estes Park. Mr. Taylor introduced President Stanley C. Shubart, Secretary-Treasurer, Schloss & Shubart, Inc., Denver, Colorado. Stan was raised in the machinery end of the coal industry following the footsteps of his Dad who was one of the founders of the RMCMI in 1912. And following his Dad's years of service to the Institute, 12 of them as Secretary, Stan has been active as Chairman of the Hotel & Registration Committee for 16 years, and, prior to his election as President, was General Chair- man for two years He is a graduate of the University of Colorado with a degree in mechanical engineering. He served our country in World War II and retired as a Colonel, Army Ordnance, after 43 years in the Reserve. He is a Trustee of National Jewish Hospital and was their President for 3 years. He has been active in many Military and professional societies, and in civic projects. I give you our President, Stan Shubart, for his remarks.

Jan 1, 1969

MR. HARRINGTON: I would like to ask Mr. Bottomley if they fire their shots while the men are in the mine? MR. BOTTOMLEY: No sir; the shot-firing law in our State requires the shots to be fired after the men are out of the mine. We fire more shots than we did under the hand method of loading. Where formerly four holes were drilled, now we drill eight, using the same amount of powder as we did formerly, perhaps a little more, but we use a slower grade of powder. CHAIRMAN LITTLEJOHN: Any further discussion, gentlemen? MR. GIBSON: Mr. Chairman, I would like to ask Mr. Bottomley, if, in his shot-firing system, as I understand it, he has a very high coal and is working something like eleven feet? MR. BOTTOMLEY: Something like that. MR. GIBSON: I read the article that you referred to. Did you use both the first and the second delay explo¬ders in shooting the coal? MR. BOTTOMLEY: We use the ordinary fuse. MR. GIBSON: That is what I wanted to find out; whether you use the delay exploders and the detonators. In Utah, we are getting away from the fuse altogether, because we do not think it is accomplishing anything to use the electric light on the cap, and' at the same time shooting with fuse. We are defeating the object we might gain in using the electric safety lamp. That is a point that might be discussed a little further. MR. E. H. JOHNSON, The Coloder Company: I would like-since it is a general opinion that mechanical loading breaks up the coal, to ask Mr. Bottomley, if he finds a larger percentage of small coal, or how much, through the use of the mechanical loaders? MR. BOTTOMLEY: We do not find any great difference. In fact, we have succeeded in improving our lump coal percentage, and that is important, because it is largely domestic. At first, when the machines were installed, the boys shot the coal too hard, and we fell down a little, about two or three per cent, the first month, in our lump percentage, and we tightened up a little and changed our methods in shooting and got on to the stunt of drilling more holes and getting a slower grade of powder. We could not load as much coal in one day as we could before, but we did succeed in in. creasing our lump coal percentage four and a half per cent over the hand method, and that is quite a factor-quite an important factor and since our domestic trade is over with, we loosened up on the shooting and we are running about the same as we did with the hand loading, maybe a half per cent more, or one per cent, but pretty much the same. MR. SHUBART: Your coal is very high? MR. BOTTOMLEY: Yes. MR. SHUBART: Have you tried sunbbing the coal before shooting? MR. BOTTOMLEY: No, we have not tried that. It is very hard coal to shoot; we have no defined cleavage in our coal. It is the worst coal I ever saw to shoot. We do not try to snub it. Formerly, as I said, the miners drilled four holes, pretty well up near the top, and then four holes down, within about three feet of the bottom. It is the same thing as a snub shot, and that we find is the best method for shooting the coal. We have not tried any mechanical device for snubbing as yet. SECRETARY SHUBART: At one mine I saw snubbing tried with a Jeffrey undercutter with a seven-foot Jeffrey bar. This mine, by the way, is very similar to Mr. Bottomley's condition. They have very high coal, so the snub cut is a small percentage. They cut a seven foot undercut and raise the machine on an eight inch tie and undercut five feet to give the effect of a snub cut, 14 inches at the front of the cut, and then six inches at the back of the cut. They made a very marked increase in lump. (The bug dust would be a small percentage of the total coal), and they increased the percentage of the slack at the same time. They found a decrease by reason of the easier shooting of about 15 per cent in their slack. In other words their nut and lump coal ran considerably higher and their slack decreased 5 per cent with the snubbing cut. Mr. Bottomley, I believe, understands those conditions.

Jan 1, 1926

Jan 1, 1963

Jan 1, 1927

Jan 1, 1971

MR. D. HARRINGTON (U. S. Bureau of Mines) : I happen to be a member of the Safety Committee, and the men on the Committee, I believe are the ones who will find the most fault with the report; but I am absolutely not in accord with the last recommendation. (The use of the "Self-Rescuer.") I do not think it safe. I do not think you are always sure you are going to have a sufficient amount of oxygen; in fact I know there are occasions in mines when there is not enough oxygen to make a man safe in a gas mask or self rescuer. At one mine fire, workers using open oil and carbide lights experienced quick reversal of air which extinguished the lights and one of the workers having carbide light was overcome. It took about 45 minutes hard work with Sylvester method of artificial respiration to restore him to consciousness. Fortunately these men were working close to fresh air but had they been far from fresh air base and relying upon self-rescuers or gas masks they would undoubtedly have perished. I was at a mine fire in Wyoming. A bunch of men were working and the air turned on them, and if they hadn't oxygen breathing mine rescuing apparatus I think there would have been at least a half dozen men killed they would have been killed before you could say, "Jack Robinson." PRESIDENT PRYDE: I would like to ask if the self-rescuers are nut approved by the Bureau of Mines? MR. HARRINGTON: They are not; absolutely not.* Furthermore, the Bureau of Mines' Engineers have opportunities to go around in mines, and in mine cars as much as anybody else in the country, and I have in mind but one who is in the slightest degree in favor of allowing self-rescuers to go in a mine. MR. BEVAN: Mr. Chairman, I would like to ask the Safety Committee if it would be of any use to the fire boss traveling through the mine? PRESIDENT PRYDE: Mr. Chairman, I think we should finish up the discussion on the self-rescuer before we take up any other discussions.

Jan 1, 1924

[ ]

Jan 1, 1997

The Fifty-ninth Regular Meeting of the Rocky Mountain Coal Mining Institute convening at the Hotel Colorado in Glenwood Springs, Colorado, was declared in session at 10:30 a.m., by Past President Charles M. "Dock" Schloss, Schloss and Shubart, Inc., Denver, Colorado. Dock introduced Mike Zakotnik, Jr., General Superintendent, The Kemmerer Coal Company, Frontier, Wyoming, President of the Institute. His introduction of President Zakotnik follows: Fellow Members, including our charming and beloved secretary, Gussie Whiteside, and our lovely Mrs. Cerise: It is now the appointed time to convene the Fifty-ninth Regular Meeting of the Rocky Mountain Coal Mining Institute which I now declare in session. At our last meeting we elected Mike Zakotnik, Jr., President, and lie has served the Institute intelligently and industriously since his election.

Jan 1, 1963