Search Documents

By John Pfisterer

Leadership Priorities in a New Business Environment ?Komatsu Equipment Company ?Health and Safety of Our Workforce ?The Green Economy & Market Challenges ?Equipment Trends ?Our Business Approach

Jan 1, 2009

Jan 1, 1964

[ ]

Jan 1, 1990

By Robert E. Hanes

Coal Perspectives We are the ?Saudi Arabia of Coal Reserves? (Billions of Short Tons) [ ] However, China & India have added approximately one half of the U.S. installed base capacity for electrical generation, in TWO YEARS ? and it took us some 50-60 years to install our coal fleet.

Jan 1, 2008

President Loren V. Linville opened the meeting at 930 a.m. He called on the Auditing Committee to give its report. Bob Wilson, Chairman, read the report and asked that it be approved. A motion was made, seconded and carried. The Resolutions Committee was asked to present its report. Mr. Herman Van Houten submitted the following: (I) RESOLVED, WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the Coal Mining Industry have suffered the loss through death of the services of: Thomas L. Gambill William G. Gray W. S. Landers J. O. Lively J. Vaughn Wilcox NOW, THEREFORE, BE IT RE- SOLVED, that there be spread upon the minutes of The Rocky Mountain Coal Mining Institute recognition of the passing of these members, who have so greatly contributed to the advancement of the industry, both nationally and in the Rocky Mountain area, and that a copy of this resolution be sent to the next of kin as evidence of the sincere regard and sympathy of the members of the Institute.

Jan 1, 1980

By William Perry Pendley

Let us go back in time, back to when a Navy veteran from the South was President of the United States, a man from the Rocky Mountain West was Secretary of the Interior and a leading environmentalist was head of the EPA; and there followed what many perceived of as a war on the West-on our water, on our timber, on our oil and gas and mineral exploration, and on our small communities. It's easy to think that I'm talking about the administration of James Earl Carter, III of Georgia, but I'm not. I'm talking about this administration, the administration of George Herman Walker Bush of Texas. I say that as a life-long Republican who never voted for a Democrat and who worked hard to put George Bush in the Oval Office. Many of us wondered, in 1988, what Vice President George Bush meant when he said; "I am an environmentalist." Well, now we know. In his State of the Union address, which was otherwise lacking in specific detail, George Bush said two very specific

Jan 1, 1990

[Mr. Houston T. Aars Carter Mining Co PO8 3007 Gillette, WY 82716 Mr. Jay Abbott Union Supply Co 7458 S Jackson St Littleton. CO 80122 Mr. Ronald H. Achziger Midwest Rbr & Sply Co 6404 E 39th Ave Denver, CO 80207 Mr. Randy Acre Dorchester Coal Co 9350 E Arapahoe Rd Englewood, CO 80112]

Jan 1, 1983

The Wednesday morning session was opened by President John Reeves at 9:30 a.m. He thanked the various committees for the excellent work they did. He called on the Auditing Committee to give its report. Mr. Jack White reported that the Auditing Committee had properly checked the financial records of Mrs. Augusta Whiteside, Secretary-Treasurer, of this Institute and reports to the membership that these financial records are indeed accurate and in good order. We so sign our names to this. This Auditing Committee wishes to take this opportunity to commend and thank Mrs. Whiteside for her dedicated effort in keeping the financial records of the Rocky Mountain Coal Mining Institute in such excellent order. (See page 5 for printed Treasurer's Report) Mr. White asked for a motion to approve the records, it was made, seconded and approved. Mr. Meade Harker, Chairman of the Finance Committee, was asked to give his report. He stated that the Colorado contributors total was $630.00 and the Utah $39.0.00, making a grand total of $970.00.

Jan 1, 1970

By D. Harrington

E. H. DENNY (United States Bureau of Mines, Denver, Colorado) In the absence of Mr. Harrington it is my privilege to read his paper, which is in his usual, forcible and sincere style, and it is within the province of this Institute, certainly, to go into it as it concerns safety and efficiency in mining. He brings out some points in his paper that, I think, are well worth the consideration of the Institute. The figures he uses were compiled by Mr. Adams, of the Bureau, and cover a five-year period. However, examination of similar Bureau figures for a ten-year period, or any other long period on other bases brings out similar results. The figures in this paper have been based on the million hours of exposure of accidents, and the figures based on three hundred working-man-day basis, or on tonnage, brings out similar results. This paper is entitled "Accident Record in Western Mines," and it is, in a way, an amplification of Mr. Harrington's letter which was read at the Glenwood Springs Meeting.

Jan 1, 1927

Jan 1, 1962

Jan 1, 1956

The opening session of the Forty-seventh Meeting of the Rocky Mountain Coal Mining Institute was called to order at 10:00 o'clock a.m., Thursday, June 7, 1951, in the junior Ballroom of the Hotel Utah, Salt Lake City, Utah, with President Arthur B. Foulger presiding. PRESIDENT FOULGER: We are a little bit late getting started, gentlemen. We have a few more members out there to register and we will wait just a few minutes until they are finished and then we will begin. The Honorable Earl J. Glade won't be here until 2:00 o'clock this afternoon. I understand lie was unavoidably detained so we are going to go down this program pretty rapidly when we get started, but we want to wait until those gentlemen still unregistered come in. Gentlemen, we will try and start now. Mr. Whiteside suggests that the minutes for last year probably should be read. However, they were published in the proceedings for last year, so I presume it will be just as well to dispense with the minutes and get going here before we lose too much time.

Jan 1, 1951

David Wolach RMCI PRESIDENT 2001-2002 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 98th Regular Meeting and Convention to be held June 30 thru July 2, 2002 Breckenridge, Colorado

Jan 1, 2001

By T. H. Butler

February 22nd, 1926. Mr. Benedict Shubart, 521 Boston Building, Denver, Colorado. Dear Mr. Shubart: At your request, am submitting to you several suggestions for the amendment of our safety code which you felt should be kept up to date. As before, am advising you that these suggestions do not have the approval of the entire Safety Committee, but rather are the individual opinions of several members who have expressed their wishes in the form of letters to me. I am particularly indebted to Mr. Dan Harrington and Mr. Wm. Littlejohn for their assistance. Would recommend the following amendment a to the various sections. Section 1. Wherever possible trolley wires should be securely hung to roof or timbers at a distance of not less than five feet and not more than six and one-half feet above rail and six inches to one side. Spacing of hangers should be from 20 to 25 feet apart. Section 2. 500 volts D. C. should not be allowed in any installations. Trolley wires should not carry a voltage of more than 250 D. C. Pumps, mining machines and other small machinery units where A. C. power is used should not carry a voltage of more than 220. Large units, such as pumps, motor genera- tor set and hoists, may use a voltage of 2,200. When power cables to operate same are of armored construction, cables should be securely buried at all crossings. Section 4. Where power lines pass through door frames or stoppings they should be properly insulated with porcelain or rubber tubing. Whenever men get on or off man-trips in vicinity of trolley wires same

Jan 1, 1926

By Charles Gottschalk

Some time after my arrival in Rock Springs to fill a short engagement with The Union Pacific Coal Company, Mr. Dickinson informed me that he had placed me on the program for a paper entitled "Mechanical Loading in Indiana." Since development of mechanical loading operations on a genuine coal producing basis for that section began near Oakland City, Indiana, and rapidly spread over Southern Indiana, Western Kentucky and Southern Illinois simultaneously, the results referred to are in many ways common to all three states. Prior to December, 1922, several attempts at mechanical loading had been registered, notably among which were installations of the Jeffry Entry Driver, and the Meyers-Whaley loader. The object of most of these earlier installations was quick development rather than lower production costs in face loading. In this measure it is claimed the machines were at least partially satisfactory. Three items which seemed to delay rapid progress in the adoption of either machine were, excessive first cost, height of coal seam necessary, and timidity of the operator relative to the labor situation which might develop. When the Joy machine was put on the market in the form of the 4-B.U., with a clearance overall which would perform in coal slightly under five feet in height, and at a cost price of less than one-half that of other machines being sold, many operators were at once ready to take a chance along with the manufacturer. This desire was accentuated by the difficulty to operate coal mines at all at prevailing production costs. This condition also made the coal miner more receptive to machinery which would give added employment to the field. At the convention held in Cincinnati during May, Mr. .Joy stated that about 200 of his machines were in operation at that time. Mr. Whaley said that about 40 of his were in use in coal mines. It is probable that of the above sum 75 machines were installed in Indiana, Illinois and Kentucky. Since that time, possibly 50 more machines of later design have been added. Like many of our troubles, those which seemed most difficult to overcome, proved in the end to have been least of all, and in this case the sup¬posed resistance which labor would advance has been more or less imaginary. In Illinois and Indiana a scale of wages is being accepted which is consistent with average earnings of machine men. The fact that a large number of coal operators want and are buying more loading machines has encouraged mining machinery manufcturers on every hand to devote renewed vigor to the cause and it is generally understood that new types and models are being developed both in factories and mines with the coal industry eager always to see the latest development. I understand that at present the Goodman, the Jeffry, and the Sullivan machinery companies are each offering new designs to meet Indiana and Illinois requirements. It is not strange that with so many installations many were made as a result of an impulse to ride the band wagon without any serious attempt to study the results or draw any conclusions from the experiences of others with loading machinery.

Jan 1, 1924

Jan 1, 1952

Amax Coal Inc. Colowyo Coal Company Continental Conveyor & Equipment Company Crane & Hoist Sales Cummins Southwest, Inc. Energy West Mining Company Paul J. Epley The Falkirk Mining Company Fleischli Oil Company T. J. Gundlach Machine Company Halbach & Braun Hemscheidt Corporation GH Hensley Ingersoll Rand Jennmar Corporation Joy Technologies K & P Sales Engineers, Inc. Kennametal, Inc. Kerr-McGee Coal Corporation L & H Welding McLanahan Corporation National Coal Association The North American Coal Corporation Northwestern Resources Company Peabody Western Coal Company Phillips Machine Service, Inc. Pincock, Allen & Holt The Pittsburg & Midway Coal Mining Co. Ramsey Technology, Inc. Roberts & Schaefer Co. Rust Tractor Company Salt River Project Schroeder Industries Smith, Barney, Shearson Snowmass Resort Association Southern Pacific Lines Stamler Corporation TerraMatrix TIC (The Industrial Company Wyoming, Inc.) Trapper Mining Inc. Wagner Equipment Company Western Energy Company Wheeler Machinery Company

Jan 1, 1993

By C. H. Trik

Any article or discussion on the ventilation of Working Faces under different systems of concentrated mining is of little value to any practical man unless based upon facts gleaned from actual experience, and empirical data on this subject is, to say the least mighty scarce. Of this one thing, however, you can rest assured, the old cry of "no air at the working faces" will have become a thing of the past. No longer will we hear of some operator who has been too eager to get out the coal and who has lost sight of everything else in his mad dash for production, digging himself shut until his airways are mere pin- points and his air current a feeble thing, too weak to combat the high resistance of his restricted mine. A mine operating under one or more of the various systems of concentrated mining should always have plenty of air, for in concentrated mining the tendency is toward greatly reduced mine resistances due to increased sectional areas. It can readily be seen that the tendency is to large, wide areas across the panel and where this is true large volumes and low gauges are the rule, unless inordinate restriction is encountered in the permanent airways, and no operator, far sighted or progressive enough to adopt this system of mining when his conditions permit, would ever allow his main airways both intake and return, to be anything but model courses. As a matter of .fact, we are likely to encounter the opposite of what is usually the case in most mines to day. We are apt to find the air at the working faces sluggish due to the large areas of passage rather than to high resistance. This is combated in. various ways which will be discussed further along in this article. Those companies, of which we have knowledge in this country who, to- day are using any of the new systems of mining, seem to proceed alike in the general method of developing their acreage. Let us assume, for this discussion, the Utah Colorado Coal Corporation is going to open a mine under the new system and their conditions are such as to permit their adopting the simple block system, each face served by a separate machine, each entry having its conveyor to the cars. After the permanent haulage and airways are driven "narrow work" starts to shape the blocks. We are not interested in the length of these "conveyor headings" since we do not need to drive breakthroughs nor build stoppings for ventilation until we have reached their end when we connect them together. We have two methods of sending air to the face of these dead ends. We can laboriously and expeilsively install brattice cloth, as we go, or we can use a small auxiliary blower with canvas tubing to the face. Indeed I may say that one of the great difficulties encountered under the new systems is in the ventilation of these narrow faces. After they have been connected and an air circuit or current established, ventilation becomes plain sailing until the block is worked out. The auxiliary blower when used with flexible canvas tubing, has been found to be the ideal answer to the question of how to ventilate the headings which are anywhere from 100 to 1,000 feet long. These small blowers when properly used, can go a very long way to assist in further reducing the cost of production already assured by the new method of mining. Right angle bends are made by the tubing manufacturers to enable the fan to sit in the fresh air current, yet out of the way of operations and any recirculation is positively avoided by blowing the air around the corner to the face.

Jan 1, 1926

At the meeting of the American Institute of Mining and Metallurgical Engineers, G. S. Rice, Chief Mining Engineer of the U. S. Bureau of Mines, announced the definition of a gassy mine. This definition has been awaited with much interest, especially by the Safety Committee of the Rocky Mountain Coal Mining Institute. It applies to the whole area of all mines, any part of which is on the public domain of the United States. Consequently it will be of wide application in the western part of this country. The safety committee of the R. M. C. M. I. has been hopeful that the Institute would adopt this definition without exception as the codes of rules to be recommended at all mines in the Rocky Mountain area. The statement follows: "The U. S. Bureau of Mines believes that all coal mines are potentially gassy; but for purposes of administration in respect to prevention of explosions and fires, the Bureau recommends the following classification: "Class 1 coal mine-A practically non-gassy mine in which flammable gas in excess of 0.05 per cent cannot be found by systematic search. "Class 2. coal mine-A slightly gassy mine in which (a) flammable gas has been found, ? but in quantity less than two per cent in still air in any active or unsealed-abandoned workings; or (b) flammable gas can be found, but in quantity less than four per cent, in some place from which the ventilating current has been shut off for a period of one hour; or (c) flammable gas can be found,* but in quantity less than one-fourth per cent in a split** of the ventilating current; or (d) flamamble gas is found in quantity greater than' specified rate*** of not more than 25 cu. ft. per minute. "Class 3 coal mine- A gassy mine in which flammable gas is found in quantity greater than specified for a Class 22 coal mine. GENERAL NOTES REGARDING DECISION NO. 3 "(A) Flammable gas found in coal mines is, with rare exceptions, methane. In coal-mining fields where natural gas is found in lower geologic horizons by deep wells which pass through or nearby the coal mines, there have been rare instances of la leakage from the well. Natural gas is chiefly methane; that constituent almost always forms more than 85 per cent of the whole, but it usually contains ethane, propane and traces of butane also. Therefore if the latter gases are found in mine air it is an indication of leakage. The lower limit of explosibility of methane-air mixture when there is turbulence of five per cent and of natural-gas-air mixtures with about ten per cent ethane and associated hydro-carbon gases is 4.6 per cent. The limit therefore varies with the character of the mixture. " (B) To determine the proper classification of a coal mine, it is advisable that systematic testing and sampling be done at least three times in a period of not less than 72 hours. All tests and samples of the mine air, except one, must show an inflammable-gas content less than the maximum limit of the class to which the mine is assigned. In other words, a tolerance of one test or analysis may be permitted to provide for a mistake or a very exceptional occurrence. "(C) When a new mine is being opened in a coal field where existing mines are generally gassy, it is common sense to assume that similar conditions will be found in the new mine, and its development and equipment should be based upon the expectation that it will be assigned to Class 3."

Jan 1, 1926

Jan 1, 1952