Search Documents

The Bowen Basin coal field is an important energy resource. A relatively small proportion is avail- able by open cut operations. Responsible men throughout the world have warned of the need to increase coal research immediately. Because energy is still available in abundance these warnings have not been heeded in Australia. The characteristics of the Bowen Basin coal make it a fairly difficult underground mining proposition and a significant research effort is required to solve the problems likely to be encountered. Both industry and government have responsibilities in the economic recovery of the maximum proportion of the resource and jointly funded research administered by existing organisations should be inaugurated forthwith.

Jan 1, 1976

By R M. Papini, A C. Araujo, A E. C Per

Flotation is an important process used in the concentration of iron ores. One of the challenges for process engineers is the low metallurgical recovery associated mainly with the fines fraction. In this work, the use of synthetic flocculants in iron ore reverse cationic flotation was investigated. The flocculants utilised were polyacrylamides of high molecular weight and different ionic degrees. Bench scale flotation tests were performed to compare the flotation performance with and without addition of polyacrylamides. It was observed that cationic and non-ionic polyacrylamides cause a significant increase in the metallurgical recovery. The anionic flocculant did not improve the flotation performance. An adverse effect was a slight increase in the silica content of the concentrate. Flotation with polyacrylamides was influenced by the hydrodynamic conditions of the pulp, such as agitation and the weight percentage of solids in the flocculant conditioning and flotation stages.

Jan 1, 2005

Mere recognition of the need for technic- ally strong human resources in the'extractive metallurgical industries has not prevented the decline in the education base for broad spec- trum metallurgists. The ability of chemical engineers to perform very effectively in many extractive metallurgical positions does not remove from the need for a general metallurgic- al education system. The intrusion of chemical engineers into extractive metallurgy is only symptomatic of the problems facing the minerals industry and its educators. The prospect of a career in the minerals base industries is unattractive to potential students by virtue of perceived inadequacies in the professional basis of the industry and ignorance of its sig- nificance to Australia's future, as assisted by excessive secrecy and a low profile public Image.

Jan 1, 1987

By Wong PLM, Hsu YJ, Nguyen HH

The treatment of copper-gold ores has been plagued by several problems because of the interaction of copper minerals with the cyanide leach solution and the dissolved gold cyanide. Apart from the higher consumption of cyanide caused by the dissolution of various reactive copper minerals such as azurite, malachite, chalcocite, cuprite and bornite, native copper also causes the loss of gold due to its cementation reaction with the soluble gold cyanide. This interaction however is complicated by the strong dependence of various copper-cyanide species on the solution pH and free cyanide concentration.By understanding the effect of various operating conditions (pH and cyanide concentration), several treatment processes could be implemented to minimise the copper-gold interaction and to separate copper from mixed copper-gold cyanide solutions.

Jan 1, 1997

By Connor J. W

Nifty Copper Operations was established to treat a copper orebody situated in the East Pilbara area of North West WA, located approximately 70 km west of Telfer in the Great Sandy Desert. The plant was designed to treat the oxidised portion of the orebody with underground development following at a later date. Nifty was designed to produce 16 500 tpa of copper cathode. This will increase with treatment of the chalcopyrite ore (underground resource). Ore processing is similar to other operations of this type but has its unique challenges. Problems discussed are: fine clay minerals which hinder percolation; oxidation of organic by manganese in the electrolyte; crud formation by clays; third phase emulsions; and organic carryover into the electrowinning tankhouse. As the orebody utilisation progresses, some sulphide material will require leaching and further investigations into liquor chemistry.

Jan 1, 1996

Mackenzie (1968, p. 167) inferred that amphibolitelayers grade into and may be correlated with footwall Potosi gneiss where it is thin under the thickest development of the "lead lode" in the New Broken Hill Consolidated mine, Broken Hill. This gradation from amphibolite to Potosi gneiss is tacitly assumed in many of the constructed crosssections of the southern end of the orebody, where amphibolite and Potosi gneiss, defined in hand specimen, are correlated in adjacent drill holes. The basis for such correlations is the observation that some amphibolites in drill core lighten in colour from black to grey along the core and grade into an unlayered rock containing conspicuous pink garnets, which resembles Potosi gneiss (for descriptions of Potosi gneiss see Andrews, 1922; Gustafson, BurreIl and Garretty, 1950; Carruthers and Pratten, 1961;\Ternon, 1969).Average chemical compositions of "footwall" Potosi gneiss and "upper" amphibolite (Hawkins...

Jan 1, 1972

The alluvial diamond deposit in the Kimberley Region of Western Australia which became to be known as the Bow River Diamond Mine was discovered in 1982 by joint venture partners Freeport of Australia Inc and Gem Exploration and Minerals Ltd. Mining commenced in 1987. This paper describes the exploration programs and results from discovery to commencement of mining and reviews the public reporting of this process in the light of 1992 Ore Reserves Code (JORC, 1992). This case study illustrates the difficulties involved in resource estimation of alluvial diamond deposits. The study also shows that current reporting standards were, to a large extent, adhered to a full ten years before the diamond reporting section to the Code was formulated.

Jan 1, 1996

In the exploration of an area proposed for the establishment of an underground colliery, consideration of all land and mining titles and consents has early priority. Environmental aspects have become more meaningful. Preliminary assessments of previous geological knowledge, together with new geological and geophysical data from surface investigations, condition the decision to proceed with costly diamond drilling programmes. Methods other than fully cored diamond drilling have a useful application in appropriate circumstances. Drilling exploration is conducted in stages of increasing density of-hole spacing to the point where, with holes at 1 km centres, reserves are categorized as measured. The programme is subject to constant review in the light of market changes.

Jan 1, 1976

By G B. Siddall

The paper examines the current state of equipment and circuit design, with reference to Australian practice. Following a review of the changes in milling applications over the last 15 years, developments in mill design are examined. Current issues include trunnion versus shell support; drive type and economic analysis for comparison of the various systems; the efficiency of the mill discharge system for slurry and pebble removal, and lining configuration. Peripheral problem areas such as pebble crushing and classification are briefly examined. Circuit design issues are reviewed. The decision to modify the traditional primary crushed feed is examined with reference to recent and proposed installations. A retrospective look at fully autogenous installations and their successes is presented, and current views on increasing throughput are assessed. Finally, future developments are anticipated in mill design and control, and competing processes are identified.

Jan 1, 2002

A Master of Applied Science degree course in Mining Geomechanics commenced in 1983 at The University of New South Wales, taught by extern- al (correspondence) studies. The course is aimed at graduates employed in the mining indust- ry, and especially people involved in geomechan- ics projects on a routine basis in remote locations. This kind of course is unique in Australia and is one of only two correspondence programmes available at this University. The author designed the course and nursed it through the early years, and was Director until 1986. The paper describes the teaching and assess- ment methods and also discusses aspects of admin- istration and coordination of such a course. It is concluded that an important need of the mining industry is being catered for and it appears that similar correspondence course for- mats would also be useful in other areas of the minerals industry.

Jan 1, 1986

By Wenya X, Bingchen C

About 60 per cent of magnesite ores of Haicheng Magnesium Mine, due to their low grade, are not currently commercially exploitable. In this paper, the flotabilities of the main component minerals of the ores were studied in detail with ether amine as collector. Based on. these, a new technique of reverse-direct flotation with single etheramine as collector for the beneficiation of the ores was developed. It gave highly satisfactory results. On the basis of the calculation by means of CNDO/2 method, of the studies of the solution chemistry of magnesite and of the adsorption tests and Zeta-potential measurements, the key mechanism in the new technique about activating effect of Ca2+ on the flotation of magnesite was suggested.

Jan 1, 1993

By A R. A Gomes

The Metropolitan Rapid Transit Authority (MRTA) Initial System Project (ISP) - Underground Structures North, UGN, is the northern section of the blue line, which is the first stage of an underground mass transport rail system of 77 km to be implemented in the central area of Bangkok, Thailand. The UGN section (Huai Kwang - Bang Sue) consists of approximately 8 km of twin single track bored tunnels, nine underground stations and some short cut and cover tunnel sections. The paper focuses on the main issues involved in the structural design of the precast concrete lining, which is the definitive structural support of the bored tunnels. It includes an overview of the site and geotechnical conditions, specific properties of precast concrete linings, ground-structure modelling, approach for the assessment of load conditions and respective sectional forces and particulars of the detailing of the reinforcement and the segment testing program.

Jan 1, 1999

Large scale rhyolitic volcanism is an important process at some convergent plate margins because it leads to chemical differentiation of the upper.-crust and is responsible for the production of long lived near surface thermal anomalies; the Taupo Volcanic Zone is.a Quaternary example. The main features of the magmatic systems-of the zone. are the existence of large high level chambers containing homogeneous silicic magma which erupt at intervals of thousands to tens of thousands of years. Geochemical work on the deposits resulting from these eruptions has shown that with few exceptions the magmas have been remarkably uniform in their . composition throughout the history of the zone although individual batches with lifespans of the order of. one hundred thousand years can be recognised by subtle differences in trace element ratios. Basalt is a rare proportion of the rocks exposed at the surface but has played a major role as a medium for heat transfer and as an end member in chemical mixing processes.

Jan 1, 1987

By L Ryan, S Halley

The use of a field spectrometer to systematically analyse drill samples from over 200 holes around the Permian-Carboniferous Ravenswood gold deposits in north-east Queensland has successfully identified both small and deposit-scale changes in the alteration mineral chemistry. Changes in chlorite composition within the tonalite host rocks are evident at the district scale, with Fe-rich chlorites seemingly more common in the vicinity of the deposits. Significant variations in white mica chemistry also occur, but mostly on the vein selvage scale, with no clear distinction between near-mine and distal compositions. The results indicate that chlorite compositional maps produced from regional field or airborne spectrometer data could potentially be used as a vector to ore in exploring for similar deposits in the area. An EXTENDED ABSTRACT is available for download. A full-length paper was not prepared for this presentation.

Jan 1, 2008

By Gao H

Based on the author's research and plant practice experience of the last decade, several technological approaches have been developed to increase the recovery of gold and silver associated with sulphides. This paper gives a general discussion of some technological problems encountered in this area in five aspects and introduces the different approaches employed in three typical mineral processing plants to increase recovery of associated gold and silver. On the basis of studying occurrence characteristics of gold and silver minerals in sulphide ores and of determining loss locations of gold and silver on flotation process, a remarkable improvement on the recovery of gold and silver in all these three plants was made by choosing proper grinding fineness, using combined collectors of good selectivity, properly decreasing the grade of main metal concentrates, making reasonable arrangement of the products of main metals, or a combination thereof.

Jan 1, 1993

The global recession of the 1980s drove commodity prices down and intensified cost competition. The 1990s saw a restructuring of the mining industry with the survivors adopting new technology, significantly increasing workplace productivity and reducing capital and operating costs. Major changes in mining industry business strategies evolved in the late-1980s including the development of miner - supplier - manufacturer - partnerships, cultural changes in work practices and common goals between the partners to reduce the cost of production. These industry trends are putting new demands on mining machine manufacturers and dealers both on the `hard' side of the machine business, such as research and product development programs, and on the `soft' side in terms of business processes, use of human resources and communication. The paper describes several mining industry trends as identified by a large supplier to the industry, and discusses the impact they are having, and will have, on mining machine development and the provision of product support services to the industry.

Jan 1, 1995

Over the last 15 years the contract mining concept has developed into an integral part of the Australian mining industry. Today it is a $2 billion per annum industry with the potential to continue to grow at a rate of between ten and 20 per cent. Australian contract miners have also exported the concept overseas where growth prospects are unlimited. The industry today is at a cross-road where both contractors and mine owners must consider the current state of the contract mining industry and where it is heading. To look at the present and the future, it is necessary to look back at the history of contract mining and why it has developed. Current industry concerns can then be summarised and the areas that need to be considered to enable the industry to prosper, reviewed. The ultimate goal is to reach solutions with benefits to both the mining companies and the contractors.

Jan 1, 1996

By P Wollants, B Blanpain, R Ding

Vacuum oxygen decarburisation (VOD) is the refining process used by ALZ (Genk, Belgium) for their production of stainless steels. The process consists of three stages: oxygen blowing at a pressure of 100 mbar, degassing, and reduction of the slag with ferrosilicon at 5 mbar. The magnesia-chromite bricks used in the slag zone of the ladles suffer from acute wear. In this paper results obtained from a program to improve the refractory life span are presented. The dominant wear phenomena were identified with an electron microscopy study of bricks taken from different locations in the ladle. Concurrently a dynamic model for the vacuum oxygen decarburisation (VOD) refining process was developed. The model calculates the elementsÆ oxidation rate during the blowing oxygen stage and allows the continuous calculation of the change of the metal, slag and gas composition throughout the VOD process. From these activities a general scheme of the refractory wear was worked out and measures to improve the refractory life were proposed and implemented.

Jan 1, 2000

By M Kuruppu

Large mining operations require a high percentage of the capital invested in mobile and fixed mining machinery. From an investment point of view this expenditure must be met by an equally high rate of return, thus the need for high plant and equipment reliability is of major importance. Equipment downtime is undesirable and very costly, resulting in lost production and revenue, which is of critical importance to successful mining operations. One of the solutions to this problem may be found in the form of competent computerised maintenance management software systems, which help to reduce the problem of breakdowns. These software assist the engineers for the management of service orders, resource allocation, progress monitoring as well as costing. They also facilitate the communication of targets and objectives among the service personnel. A computerised maintenance management software called MAINPAC was used to record and plan the activities of mobile equipment maintenance in a large mining operation in Western Australia. Among the details recorded were equipment data, service history, machine downtimes, previous maintenance, job planning and the resource required. This information further helped to analyse the maintenance efficiency, availability and the reliability of the equipment.

Jan 1, 2006

Attention is given to three possible alternative structures namely corporate joint venture, partnership joint venture and unincorporated joint venture. A corporate joint venture involves the formation of a separate and distinct legal entity with limited liability. The shareholders of the Company will be the members of the consortium. A partnership joint venture involves the members of the consortium joining a formal partnership. The partners will conduct the business in common with each other and will share the profits and losses of the project activities. The partners will be jointly and severally liable. An unincorporated joint venture is distinct from a partnership. The members of the venture will not be jointly and severally liable. Taxation and accounting aspects are examined and an outline provided of a typical joint venture agreement. The two main advantages of an unincorporated joint venture are considered to be a favourable treatment for income tax purposes and a greater degree of flexibility when compared with the corporate joint venture and the partnership joint venture.

Jan 1, 1983