Search Documents

By F Pavloudakis

The installation of on-line analysis systems in the open-pit mines of the Public Power Corporation SA (PPC, the state-owned electricity entity of Greece) is considered to be the key-parameter for performing improved quality control and blending/homogenisation of the produced lignite. In order to investigate the accuracy of these systems under the site-specific conditions of the Greek lignite deposits, a research project was carried out. This was necessary since there is lack of experience in using on-line analysers in mines that produce a fuel of such a poor and largely fluctuating quality. After thorough market research, a dual energy gamma ray transmission on-line ash analyser was installed in Kardia mine of Ptolemais û Amynteon Lignite Centre, which is located in West Macedonia, Greece. The initial results obtained after the realisation of a series of dual-comparison trials (ie using two series of reference values that allow three-way comparisons) pointed out several problems that obstacle the achievement of high accuracy on-line measurements. More specifically, the measurements obtained by the analyser were higher than the concentrations determined by the two laboratories when the ash content was lower than 12 per cent (in wet basis). On the contrary, when the ash content was higher than 12 per cent, the measurements of the on-line analyser were lower than the concentrations determined by the laboratories. In other words, the range of the measurements obtained by the analyser was narrower than that corresponding to the lab analyses results. Therefore, the use of this on-line analysis system under the site-specific operating conditions of Kardia mine does not guarantee improved quality control of the lignite fed to the mine-mouth located power plant. Most probable reasons that explain the above-mentioned problems are the following: The frequent and widely ranging fluctuations of the chemical and mineralogical composition of the lignite transported by the conveyor belt, especially as far as its calcium content is concerned. This result from the nature and the origin of the mineral matter co-excavated with the lignite, which varies from calcareous marls to sands and clays rich in aluminium and silica minerals. The fluctuations of the lignite quantity transported by the conveyor belt. The change of the linear concentration of iron contained in the fabric of different belt parts.

Jan 1, 2003

By Pollack B

Four different major international copper projects are discussed. Three have recently come on line, and one is now being constructed. Each of the projects has encountered unique problems during the course of its development because of the legal requirements of the host country, together with its political and social needs. Nevertheless, there have been similar problems to solve. There were six common factors. 1. Quality engineering to be performed under the direction of an experienced project team. 2. Good communications. 3. Logistics. 4. Customs requirements. 5. Availability of capable construction labour. 6. Local material source capability.

Jan 1, 1983

By Johnston G, Joyce C

The permitting of new mining projects has evolved into a highly complex process that must be carefully managed. Only by developing a thorough understanding of the issues involved and stakeholder interrelationships can successful strategies be developed that integrate the often competing demands of: ò regulatory requirements, ò commercial requirements, ò social/cultural needs, and ò technical issues. Properly implemented, this approach can result in: ò shortened approval timeframes, ò better project definition ò broad based community support, and ò favorably disposed government departments.

Jan 1, 1997

The expense of mine environmental and planning process approvals is a fundamental and proper part of mine planning and feasibility costs. It is not a cost that should be the subject of challenge nor is it a cost that should be avoided. However the additional process approval costs incurred by bureaucratic delay, process duplication and administrative incompetence is a scandal and a deterrent to investment.

Jan 1, 1992

By Chen J, Sun ZY

The present paper gives the design of a new HGMS for magnetic separation of sulphides. The main characteristics of this HGMS are using iron-cladding saddle-shaped magnetic coil for instead of the ordinary magnet, and combining reciprocal-linear motion with vibration to actuate the separation box, and the magnetic field intensity is high up to 2T as well. For improving the magnet system design, a modified finite element method is used to calculate the distribution of magnetic field intensity of separation space of the magnetic coil, and accordingly the calculation results the magnetic leakage coefficient can be determined easily, thus designers apart from the empirical way. KEYWORDS: HGMS, reciprocal motion and vibration, finte element method, saddle-shaped coil.

Jan 1, 1993

The theme of this Annual Conference of The Australasian Institute of Mining and Metallurgy is in the form of a question: `Adding Value to our Resources - Our Future?' There are two ways of looking at this question. The first is to assume that any mineral or energy resource is worthless until it is identified, recovered and put on the market. In this sense all our current operations, be they open cut coal mines or aluminium smelters, are engaged in adding value. The question then becomes: what is the future of the minerals and energy resource industries with which we are familiar - will they grow or contract? The second way is to emphasis the value-adding aspect. The question is now one of whether or not our future depends on adding further value to resources we are currently selling.

Jan 1, 1995

By F Solomon

This paper explores the recent escalation in public opinion for business to demonstrate the social value it generates through its activities. The concept of social capital is analysed, including the linkages between social and environmental values. Also discussed are the challenges inherent in devising a method for evaluating social value, determining appropriate performance indicators and then evaluating acceptability of outcomes. The linkage between accountability and added social value in the minerals industry is analysed. This includes an illustration of the models of accountability that are now emerging and the adding of social value.

Jan 1, 2000

By Collins L

The commercial success of a mining project can be strongly influenced by the business activity which takes place away from the mine site. The project revenue is determined by marketing success which results from persistent research and full realisation of suitable products and by-products and appropriate upgrading achieved in conjunction with proper material security and insurance. Significant costs of transport can be optimised, protection of the environment carefully managed and skilled employees acquired as a valuable asset. Working capital requirements are often substantial and should be carefully established and financed, possibly by special contractual arrangements for product sales.

Jan 1, 1997

Aberfoyle sought to reduce Hellyer project development risk to a greater degree than usual. Consequently the ore reserves estimate and feasibility study were particularly comprehensive. A detailed ore reserve study was completed based on extensive drill core and underground sampling, large scale pilot plant work and a detailed feasibility study. Leading external consultants were used for advice on commercial matters which impact on ore reserves and to audit major technical conclusions, including the results from pilot plant work and the ore reserve estimate. Other project risks were diminished by negotiating a State agreement covering security of title, royalty formula and environmental management procedures, by obtaining sales contracts, and by analysing Hellyer's position on an industry cost curve. The task of financing the project was much simplified by the extent and quality of information available from the ore reserves estimate and feasibility study report.

Jan 1, 1990

By R A. Bearman

Recent demand pressures for iron ore should not distract from the longer term view that intense competition in the industry has demanded technological innovation of a high order. There is a long track record of successful innovation underpinned by a solid base of scientific research and knowledge. By comment on recent developments in trucks, comminution and direct smelting, this paper suggests that innovation is still a key attribute of the industry. The spending of the minerals industry on underlying science, however, is not particularly high. By looking at other industries we can ascertain that for step change technologies, it is particularly advantageous to have a solid base of science and technology underpinning developments.

Jan 1, 2005

During the 22 years that Isa Mine has been formally involved in accident prevention, it has succeeded in reducing its lost time injury frequency rate by 70 per cent. At present its performance compares very favourably with that of other heavy industries and in particular that of other underground metalliferous mines. When reductions such as this are recorded, people want to know how it is achieved. No doubt it is assumed that if an organisation can maintain a consistent performance in accident reduction, it must have developed a panacea for the prevention of industrial injuries. This assumption would not be in accordance with the facts in the case of Isa Mine which has achieved its record through plain hard work and plenty of it.

Jan 1, 1975

This is the seventh major symposium organised by Illawarra Branch over the past five years and the fifth dealing with various aspects of coal. It is clear that all of you here need no convincing that black is beautiful! This symposium is on a broader canvas, covering the overall field of occurrence, preparation and utilization of black coal throughout Australia. It is thus the most comprehensive treatment of the subject by the Institute since the symposium organized in 1950 by the Sydney Branch with the co-operation of the then newly formed branches in Newcastle, Illawarra, Central Western N.S.W. and Southern Queensland, all of which shared coal as a major interest. The 1950 symposium was adopted as a volume in the series of seven published by the Fifth Empire Mining and Metallurgical Congress in 1953. This historical reminiscence brings to our minds the circumstances in which these new Institute branches were formed. This happened in the year of the presidency of the late Frank Hockey, and at the time the Australian black coal industry was in many ways at a very low ebb. It was the time of extreme shortage of coal following World War II, and the industry was beset by industrial unrest on such a scale that daily bulletins were posted listing the number of idle pits, of idle miners and of tons of lost production. There could not, of course, be any thought of export marketing. Some of the more picturesque bulletins recorded the number of pits at which the ceremonial emptying of billies took place, and the number of pits at which the aroma of the horses' breath was insupportable. At an Institute conference at the time it is on record that the late lamented Austin Edwards, that tireless mineral researcher, author and editor, in his gentle way chided the personnel of the industry and the members of the Institute for having allowed a situation to develop in which a whole generation of Australian children could grow up without ever having seen coal or knowing what it was. It is sad that most children and most Australians have still never seen coal, and think of it as something dirty and uninteresting. The desperate situation of the black coal industry inspired moves by people in industry and in governments, whose plans and efforts have been recorded elsewhere, to modernize coal mining methods, to introduce coal preparation, and generally to restore the mines and the mining communities and to re-cast the steel industry and electricity generation. Amelioration of the traditionally troubled industrial relations was an integral part of this overall programme, and whilst one would wish this aspect had progressed further the situation has, in fact, improved immensely. New investment in exploration, mining, preparation, transport and utilization both by the existing coal mining groups and by new entrants, Australian and overseas, have played a large part in bringing about the transformation of the industry to such a point that Australian needs are being fully met and a large export market is being supplied - a situation that few would have dared to hope for in those dark post-war days. Forecasts of exports from New South Wales and Queensland show coal becoming a dominant foreign exchange earner for an indefinite term. Old King Cole may have vanished from our children's nursery rhymes but King Coal is here to stay, providingthat costs in the industry can be kept within competitive limits. It is all too easy for an industry to price itself out of the export market by inflation, by increased costs for a variety of reasons, and through currency readjustments. A second proviso is that we must continue to encourage a balanced attitude to environmental matters.

Jan 1, 1975

By A Jha, R Merz

The substantial growth in world demand for Queensland coking coal has seen a number of new coal mine developments in the Bowen Basin in recent times. The Bowen-Broken Water Supply Scheme (BBWSS) is presently based on water supplied from Eungella Dam and storages at Collinsville to two major pipelines. In early 2004, three successive years of well-below average rainfall had left Eungella Dam at critical levels, threatening the regionÆs mines, which rely on it for their essential water supply. SunWater noted that without significant inflows into Eungella Dam, or the development of a new water supply to the region, existing mines would be severely restricted in water supply, and downstream economic impacts to the region would follow. SunWater investigated the opportunities for additional supply capabilities, including combinations of off-stream storages, additional pipelines, and raising Eungella Dam. An off-stream storage (OSS) was selected as being the preferred option to improve the reliability of the system and head off impending falls in announced allocation for the system. The integrated quantity quality model (IQQM) is the Queensland GovernmentÆs preferred model to define and assess total catchment performance against water security and environmental objectives. Modelling of the performance of the water supply system, with and without the proposed OSS, was required to provide justification to the customers of the system that the OSS was in fact required, and also to optimise the configuration of the OSS within time and budgetary constraints. In the case of the BBWSS, no environmental base flows are dictated by the Department of Natural Resources, Mines and Water (NRM&W) at present and the primary reason for applying IQQM was therefore to investigate the trade-offs between supply options and reliability. SunWater produced IQQM outputs for a range of scenarios for the proposed off-stream storage, and these IQQM outputs were then used as input to a decision-support tool based on the GoldSim modelling package. The GoldSim model was then applied to investigate the water supply reliability for high priority users resulting from various existing and/or proposed water supply infrastructure configurations coupled to the hydrologic system. The GoldSim model included the ability to assess the long-term water supply reliability impacts for each of the water supply end-users for a wide range of user-defined scenarios. Non-technical model users were able to change the size of the off-stream storage, pipeline capacities and assumed climatic conditions and test for themselves the relative benefits (in terms of water supply reliability) of different infrastructure configurations under consideration. The decision tool was of significant benefit in assisting the decision process to SunWaterÆs mining customers. These customers needed to decide if they felt that the increased reliability in their water supplies from the system that would be created warranted the estimated increased charges that would require to be levied to recover costs of the new infrastructure with appropriate profit margins. The conjunctive use of IQQM and GoldSim was successful in demonstrating the impact of both hydrological and non-hydrological issues on the future water supply reliability in the BBWSS and resulted in a decision to proceed with the construction of a new OSS.

Jan 1, 2006

Today's emphasis on the enterprise bargaining process must be seen as an opportunity for organisations to further develop occupational health and safety standards at work. In particular, this shift from a centralised industrial relations system to employer, employee bargaining, presents organisations with an excellent opportunity to develop OH & S at the `shop floor' level. This is despite real difficulties in presenting hard data on the cost benefits. Unfortunately, examination of enterprise agreements ratified by the Australian Industrial Relations Commission (AIRC), show that less than 32 per cent contain provision for occupational health and safety. Those addressing the issues of occupational health and safety have included segments such as: ò rehabilitation activities; ò a new emphasis for workplace occupational health and safety committees; ò formalising procedures related to hazard identification and control; ò the use of personal protective clothing; and ò occupational hygiene and health monitoring issues. For example, an enterprise agreement reached between CIG-Gases and their unions, included clauses which commit employees to attending ten safety meetings and two work place inspections each year, in order for them to receive any further pay rises.

Jan 1, 1995

By D von Horn

Mineral sand orebodies are typically mined for their TiO2 content. Increasingly over the past 30 years, the major mineral focus has shifted from natural rutile to ilmenite and an acceptance that the latter generally needs some form of upgrading for economic conversion into TiO2 pigment. This upgrading obviously has a cost, and in conjunction with diminishing mineable feed grades, results in higher cost TiO2 units for chloride route Pigment Plant feedstocks. The net cost of feedstock can be significantly influenced by the recovery and sale of accessory minerals and by-products from the processing chain to the extent that some producers have the potential to achieve a zero net cost. Whilst slagging plants typically reduce net cost from rutile, zircon and pig iron revenues, operations supporting Becher type synthetic rutile operations have been limited to revenues from rutile and zircon only. A range of alumino silicate minerals show industrial potential, as does activated carbon, iron oxide and gypsum, by-products of the synthetic rutile process. Tiwest is a good example of a company maximising revenue from the accessory minerals as well as from by-products of the synthetic rutile process.

Jan 1, 2001

The various functions of public relations are playing an increasingly important part in the activities of the many companies now engaged in oil exploration in Australia.Several of the larger exploration companies, notably West Australian Petroleum Pty.Limited, Ampol Exploration Limited, Caltex Oil (Australia) PtSr: Limited and Australian Oil and Gas Ltd. (and its American Associate Union-Kern), employ staff or consultant public relations specialists. In, most of the other companies now exploring in Australia, public relations are handled within the company, directed from the highest executive level.The object of public relations in.the oil industry is. to create in the public mind an impression favourable to the industry as a whole and'the company -or group of companies with which the public relations officer is associated.

Jan 1, 1962

Disastrous earthquakes are a reality on the Australiancontinent. Unfortunately it has taken the fatal 1989 New-castle earthquake to demonstrate to all Australians that we do not reside on a "stable continent". While the world accepts the potential of plate tectonics and its associated plate margin earthquakes, particularly around the active Pacific Rim, the realisation of devastating intra-plate, or continental, earthquakes is only now beginning to take effect. The 1989 Newcastle earthquake provides many lessons on which to further fundamental earthquake research and the applications to the future welfare of human civilisation. To mitigate the earthquake hazard in relation to the devastation to life, property and industry, research must be undertaken with the resulting informa-tion to be included in the nation's disaster management programs. The earthquake hazard is everpresent in east-ern Australia and the major step in its quantification is a more realistic determination of earthquake risk estimates through an integrated study of seismology, engineering, insurance and sociology.

Jan 1, 1990

By S Strohmayr, R Harvey, A See

Ernest Henry Mining Pty Ltd started production in August 1997. The Ernest Henry orebody consists of two distinct parts, a complex supergene ore zone overlying a primary ore zone. The economic copper minerals in the supergene ore were chalcocite, bornite, secondary chalcopyrite and native copper while the primary zone has only chalcopyrite. The variability of the supergene zone made concentrator operation difficult and predicting metallurgical performance using mineralogy essential to establish the capabilities of the concentrator. A paper presented at the 1998 Mine to Mill Conference entitled Mineralogy Controlling Metallurgy at Ernest Henry Mining (Barnes, Strohmayr, Brindley and Munro, 1998) presented the testwork and initial plant surveys that showed that the mineralogy of the ore controls the metallurgy of the concentrator. This paper presents the data obtained from the subsequent years of operation treating both the supergene and primary ore types. A review of the actual supergene mineral distribution in feed and subsequent recoveries compared to those predicted as part of the flowsheet design is also presented.

Jan 1, 2003

EARLY HISTORYIt is 91 years since the epic discovery of gold at the eastern end of Kalgoorlie's main street appropriately named Hannan's Street after the prospector who found the first gold here on17 June, 1893.The Spirit that motivated the early prospectors in their search for gold in this thirsty sun-burned land, unmapped, uncompromising and difficult is characteristic of gold prospectors the world over. Conditions have changed since then substituting comparative comfort for previous austerity and privation, but the quest-ing spirit, the everlasting optimism, the perseverance in the face of frustration .and disappointment still exists.It exists with the prospector who more often than not is a company geologist; it exists with the shareholder enjoying through his investment a vicarious participation in this wonderful, exciting industry and not the least with those people who have chosen the goldmining industry as their career.

Jan 1, 1984

The paper reviews recent valuations of mineral properties, many of which are at an early stage of exploration. The various methods used are outlined. The problem of comparing, in terms of whether it is fair and reasonable, a highly subjective opinion of the present value of a portfolio of exploration tenements with a vendor consideration, the real value of which, in most cases, lies at some indeterminate time in the future because of the application by the Australian Stock Exchange (ASX) of escrow conditions, is highlighted. Examples are given of some of the questionable logic used by consultants in handling this difficult issue. A proposal for revision to current flotation and listing practice which, the author believes, would circumvent the problem and at the same time provide better protection for the investing public is offered for Consideration.

Jan 1, 1994