Search Documents

T. T. READ, BUREAU OF MINES: Mr. McAuliffe has asked a very practical question. Expressed in another way, the question is: If we have decided to use rock dust to prevent coal dust from exploding, have we got to take rock, that is, solid material,, break it up and finally grind it into dust (and fine grinding is very expensive), or can we take material that is already in a pretty fine state of subdivision and thereby save the expense of pulverizing it? Most of the preceding discussion has been from the view-point of practical experience, and I should like to suggest that we have not had enough practical experience in rock dusting to be able to answer this question, from the viewpoint of experience, with the degree of definiteness that Mr. McAuliffe desires. With your permission I will discuss the matter briefly from the theoretical standpoint, because after all the theoretical considerations, insofar as we understand them correctly, will apply to every' case, whereas in coming to a decision on this matter it will be necessary to take into consideration local conditions, which will necessarily vary in every case. Considering the matter in a rather elementary way, the first point is: What makes coal dust explode? The air of this room is full of dust at the present moment, even though we do not notice it. If you were to close up the room for a week, enough dust would settle on the floor so you could write your name on it. Of course, the dust which is in the air of this room is not coal dust but even if it were coal dust and you were to bring an open light in' here we all know that the dust would not explode. The reason for that is that the dust particles are not close enough together for the flame to propagate itself from one to the next. You will probably be able to see in the demonstration in the gallery on Saturday that the coal dust explosion is practically a very rapid burning of the dust. When you light one piece of dust it burns and gives out heat and if there is another piece of dust close enough to it so that the heat from the first piece is able to bring a second piece up to the burning temperature, then the flame will propagate itself through the mixture. But, if the particles are so far apart in the air that the' heat from one particle is dissipated before it reaches an adjoining one, and is therefore not able to bring the second particle up to the burning temperature, then the flame will not propagate. To get a coal dust explosion, it is not sufficient to have coal dust suspended in the air. The coal dust particles must be close enough together in the air so that the heat from one burning particle is able to heat the adjoining particles up to the point at which they will burn. There has been some discussion of the size of dust particles that will cause an explosion to propagate, and it has been pointed out that the minus 200-mesh dust is the most dangerous, and that particles coarser than 20-mesh will not propagate an explosion. There are two reasons for that. A large particle has very much smaller surface in proportion to its weight than a small particle has. You know the old story about the Indian who when asked how he could go around in cold weather without any clothes on said that an Indian was all face. A 200-mesh particle is almost all surface and there= fore is able to burn almost instantaneously, which means that it gives out its heat almost instantaneously, whereas a large particle with less surface in proportion to its weight burns more slowly, gives out its heat more slowly, and the heat has more time to be dissipated. The second reason why coarse dust does not easily propagate a flame is because it is so hard to make it

Jan 1, 1924

By George Cherpelis

1. Historical Background of the Employment Relationship A. The Relationship at Common Law 1. Jacob & Rachel 2. Domestic Relations 3. Statute of Laborers (Black Plague) 4. Puritan View (idleness as the parent of all vices) 5. Shift from law based on status to one based on contract B. Enforcing the Employee's Promise to Work I. Forced Labor a. English law b. Thirteenth Amendment 2. Forced Labor vis a vis Forced Performance - Role of the Court 3. Prevent working for another employer C. The Employer's Promise of Employment 1. Originally employment was considered of personal nature and employer could not be forced to employ or continue to employ 2. Impact of modern statutes

Jan 1, 1984

James Westfield, Assistant Director, United States Bureau of Mines, Washing- ton, D. C., called the second morning session of the Rocky Mountain Coal Mining Institute to order, and promptly introduced John Peperakis, Manager of the Sunnyside Operations, Kaiser Steel Corporation. Sunnyside, Utah, who spoke on "Ground Control Developments, Sunnyside Mines, Kaiser Steel Corporation." Mr. Peperakis illustrated his talk with a number of slides which were not reproduced with the printed text. (For the printed text of Mr. Peperakis' paper see index.) James J. Diamanti, President of the Car- bon Fuel Company, Helper, Utah, was introduced by Mr. Westfield, and he spoke on "Small Mine Operators Help Themselves." Questions from the floor followed Mr. Diamanti's talk.

Jan 1, 1961

The Sixty-First Regular Meeting of the Rocky Mountain Coal Mining Institute convening at the Stanley Hotel in Estes Park, Colorado, was declared in session at 10:00 a.m. by Past President Claude P. Heiner, President, Minerals Development Corporation, Salt Lake City, Utah. Claude introduced Oren F. Bridwell, Secretary, Northern Colorado Coals, Inc., Denver, Colorado. His introduction of President Bridwell follows: Ladies and gentlemen, it is my privilege and pleasure to open this session of the Sixty-first Regular Meeting of the Rocky Mountain Coal Mining Institute. My particular assignment is to introduce to you (those of you at least who do not know him) our Acting President, who for now we will call "Brid."

Jan 1, 1965

By Eli Follett

It is indeed gratifying to note the marked improvement in the methods used in the coal- mines today compared to the methods in earlier days. Away back in the decade of 1900 to 1910 many of the mines were conspicuous for their absence of sprinkling and humidifying systems, as a result much of the natural moisture was absorbed by the dry air current and carried out of the mine and the mine was left dry, dusty and dangerous. This dangerous condition was intensified by large accumulations of fine coal dust on the haulageways where fire flashed from poorly lubricated rollers and bullwheels-trip riders used a torch with a flame reaching to the back of their necks, and large supplies of blasting powder were kept in the mines. Accidents and disasters were very frequent as we, in our ignorance flirted with danger. Staggered by the numerous accidents, and the nature of them; men began thinking along lines of safety, they worked out schemes and after many disappointments succeeded in having, some very whole some legislation enacted covering coal mining operations only to find that much lawlessness was still being practiced by the miners whom they sought to protect; step by step these safety men forged ahead, enlisting the co-operation of a few men about the mine whom they called a safety committee, until, today, we have an ironclad mining law which all have to respect. We have sprinkling and humidifying systems, the miners electric lamp, permissible explosives and many other devices making for greater safety in the operation of our coal mines. Our mines are no longer veritable gasometers and powder storehouses, as I. knew them to be in South Wales, Britain, where I started to work in the mines. Instead, the mines of this day are healthy, well lighted and ventilated workshops and too much cannot be said in the praise of safety engineers who, fought altruistically in their efforts to bring about the wonderfully improved conditions in the coal mines of this day. While the possibility of a mine fire starting, in these days of scientific mining, is remote every one admits there still exists a possibility and to deal with a fire, should one start, most coal miners are equipped with fire extinguishers. Extinguishers of all designs conceivable are on the market, the different extinguishers are charged with different chemical substances, Some are charged with patented chemicals and others with baking soda and sulphuric acid and so on, however, many of them are equipped with about eighteen inches of rubber hose and bear the conventional "FOR FIRE-TURN UPSIDE DOWN" but nothing is said to indicate how close it may be necessary to take the extinguisher to the fire before doing the "TURN UPSIDE DOWN" act, neither is anything said as to what effect the contents may have upon the' hands, face or body of operator should he come in contact with the liquid, nor is any warning given as to the dangers in the fumes which may come from the contents of the extinguisher in contact with the fire.

Jan 1, 1922

President Schloss called the third session of the fifty-eighth annual meeting of the Rocky Mountain Coal Mining Institute to order at 9:30 a.m. and introduced James Westfield, Assistant Director, Health and Safety, U. S. Bureau of Mines, Washington, D. C., who presided over the session. First speaker of the session was S. L. Jewell, Vice President, Peabody Coal Company, St. Louis, Missouri, who spoke on "Our Three Main Routes From Here." (Biographical sketch of Mr. Jewell, see index.) (For the printed text of Mr. Jewell's paper see index.) Mr. Westfield introduced Marling J. Ankeny, Director, U. S. Bureau of Mines, Washington, D. C., who served as moderator on the panel, "How Do We Go From Here in Safety?"

Jan 1, 1962

By J. H. Emrick

When I was asked to read a paper to you, I wondered what idea I could bring before you which would be interesting and which would be helpful in your work in operating coal mines. The Institute has been studying ways and means of increasing the safety and efficiency of mine operations. Almost every subject along this line has been discussed from time to time. In thinking the matter over it occurred to me that there was one thing used by practically all coal mining companies in considerably large quantities and which in many cases does not receive the attention it should. It is the cutter bit placed in the cutter chains on coal mining machines. Coal mining machines have been repeatedly improved during the last twenty-five years until their efficiency and convenience have reached a high level. The generating units making electrical power to operate them also have been developed to a similar degree. This machinery has been in- stalled at a great expense to coal mining companies and the installation made for the sole purpose of pulling coal cutter bits through coal. Why not then give these cutter bits some attention so as to see that they do their work as efficiently as their driving and propelling units? The consideration of this question easily divides itself into three principal parts-First, the kina of steel out of which to make the bit; Second, the proper form or shape to give it; and Third, the tempering of the bit. Let us discuss them in that order. There have been tried at different times' various grades of steel for cutter bit uses. The cheaper steels, having a very low carbon content (.10 to .30 per cent carbon) have proved un- satisfactory because such steel cannot be tempered so as to produce a satisfactory cutting tool. Because of the low carbon content, it cannot be hardened to retain its cutting edge. It dulls quickly, bends easily on striking any hard obstruction in the coal, and so requires constant resetting to its original form. The high priced alloy steels when properly shaped and tempered will give a bit that would make a clean, even cut in the coal if no impurities were encountered. Such a condition is rarely found. Alloy steel is quite brittle and on striking impurities, such as sulphur balls or a sand spar, is readily broken and so the loss of material through these broken bits and the high price paid for it more than offset all the other advantages which this steel has shown in cutting. Experience has shown that steel having approximately .70 per cent carbon and from .25 to .35 per cent manganese will give the most economical results. Some mines have obtained better results by using a steel of slightly higher carbon content and in some cases a grade of tool steel has been used. The disadvantage of using a steel having too much carbon is that it can easily be spoiled in the black- smith shop by overheating. Steels having a carbon content of about .70 per cent have a sufficiently wide range of temperatures at which they can be forged and hardened so that with ordinary care and attention they are not likely to be burned. Steel of this quality, therefore, has been found to be the most practicable because of its reasonable cost, ease in working and tempering and general durability. In the early days of mining machines, comparatively few bits were used because each machine required but a few bits because there were but

Jan 1, 1925

The thirtieth regular meeting of the Rocky Mountain Coal Mining Institute was called to order at 11: 20 o'clock A. M., Wednesday, June 3, 1931, President G. A. Kaseman presiding: PRESIDENT KASEMAN spoke in part as follows: I have in mind to say a few words of welcome to the coal operators, but I am afraid that the words I might have said would be hardly appropriate, because I believe the coal operators are in the minority today. It demonstrates to my mind something that has been running through it for some little time. When the hard times came on a year ago, we thought we were going to get over it rather lightly. I recall at this time a year ago we thought that the depression was about at an end. The National Administration from Washington told us we had reached bottom and things were going to perk up, and for a few weeks or maybe a month or more there was a sort of optimism throughout the country. I had been East, and when I re- turned to Albuquerque I said to my friends and associates that things were getting better in the East and that they would soon be better out here and we will not have felt the hard times very much. But I have learned differently since. I have learned that hard times are no respecter of communities or corporations, or persons, or activities, and that we all suffer alike. On that account we find that our Institute is suffering just the same as other activities, whether national, state, local, social, or what- ever it may be. Our attendance is light or, that account. We all know when times are hard we have to stay at home and watch things closer than when they are good. And when they are good we feel that the machine will run of its own momentum and in this way we can get away to see what is going on in the world. When times are hard we have to stay at home and look after everything from day to day and hour to hour.

Jan 1, 1931

The twenty-fifth regular meeting of the Rocky Mountain Coal Mining Institute was called to order at 11 a. m. Monday, August 29, 1927, in the County Court House at Trinidad, Colorado, the Vice-President, F. L. Peart, presiding. After a few words from John F. Carmody, Editor of Goal Age, J. Q. McNatt, Division Engineer of the Colorado Fuel & Iron Company, read a paper on "Coal Geology." In the afternoon, Prof. C. B. Carpenter, of the Colorado School of Mines talked on the work in Fuel Engineering being developed at the Colorado School of Mines. W. C. Holman, of the Phelps Dodge Corporation, then read his paper on "Developing a Pit Car Design." L. M. Kuhns, Safety Engineer of the Gallup American Coal Company, read his paper on "Safety Methods at Gallup American No. 5 Mine." After discussion the meeting adjourned for the day.

Jan 1, 1927

Secretary's Apology: Although every effort was made to secure efficient stenographers, the railroad conditions at the time made it impossible to get stenographers from Salt Lake City. Practically all of the discussion was therefore lost, and the Secretary's apologies are offered to those whose names and remarks we are unable to record. 'We are indebted to R. Dawson Hall of Coal Age for what we have been able to print. The question was asked why belt conveyors are not more generally used. BENEDICT SHUBART: Belt conveyors lack the ruggedness of metal conveyors and require more accurate alignment. They are much used in England though comparatively scarce here. The H. C. Frick Company's belt installation at Colonial mine is an unusual installation for unusual purposes. It is hardly main haulage, but is more comparable to railroad transportation. The belts are in long sections,, nine hundred to twenty-three hundred feet, there are no particular grades, only two turns, and the immense tonnage handled justifies a quality of installation that at this day would not prove economical in most mines. EUGENE McAULIFFE, Union Pacific Coal Co., Omaha: Was much impressed on learning at the American Mining Congress that the Hudson Coal Company had mined last year 1,500.000 tons of coal from a 36-inch bed and had transported this coal to the mine cars by scrapers and conveyors. He did not believe that because one or two percent of the men around the mines were opposed to loading machines, that it should be said that the mine workers were inimical to such labor saving means. He believes that when duly explained to them they could see the advantages of the equipment offered and would be friendly to its introduction. The Sheridan-Wyoming Coal Company at Sheridan have eight Goodman Hydraulic loaders in operation in rooms .with Joy loaders driving the headings. It is not possible for the mines which had to pay high wages to compete with those whose wage scales were lower unless by the introduction of loading machines. He received a letter from Dr. L. E. Young of St. Louis, general manager of the Union Collieries Company, that his two Goodman Hydraulic machines were loading an average of three hundred tons each daily. THE SECRETARY: H. N. Taylor, president, Sheridan-Wyoming Coal Company, said Mr. Green of the American Federation of Labor told him he would have no trouble with Union Labor, and, if any local disturbances were created, they would be stopped. The Union nationally is with the introduction of labor saving equipment. J. B. FORRESTER, General Superintendent. United States Fuel Company, Hiawatha. In his opinion metal conveyors are preferred because they can be lengthened and shortened at pleasure, and so can be operated with greater flexibility than belt conveyors. W. C. HOLMAN, Chief Engineer. Phelps Dodge Corp: The Phelps Dodge Corporation have two Jeffrey belt conveyors in tandem which obviates brushing where the coal is low. MR. E. O. WIEDERANDERS, Jeffrey Mfg. Co.: Says he has seen belt conveyors in use in England and is much taken with the idea. MR. WM. MOORHEAD, Phelps Dodge Corp.: Our conveyors are in twenty-foot sections, each with a motor. Three of them tandem make a sixty-foot face. GENERAL: There was discussion regarding the size of the coal produced by conveyors. It was said that when the Gunn-Quealy Company started their operations, the coal was very large, but now there is not so much care taken to produce large coal as the market is now demanding smaller coal. The Secretary said that the use of conveyors at the Kemmerer Coal Company's mine had almost doubled the percentage of lump coal. Mr. McAuliffe questioned

Jan 1, 1925

Presiding: Herman Van Houten, Senior Marketing Counselor, Joy Mfg. Company, Pittsburgh, Pa., and John A. Reeves, Vice President, Mid-Continent Coal &Coke Co., Carbondale, Colorado. The Keynote Speaker, Senator Jennings Randolph from West Virginia, was unable to come due to pressing business in Washington. A film presentation on Surface Mining and Reclamation, "Energy Bridge," Courtesy of Pittsburgh & Midway Coal Mining Company, Denver, Colorado, was shown and was prefaced by comments from James V. Fisher. "Advantages of Longwall Mining in Western Coal Production" was a paper presented by David W. Wisecarver, Supervisory Mining Engineer, U.S. Bureau of Mines, Denver, Colorado. Mr. Wisecarver graduated from Virginia Polytechnic Institute in 1949. After two years with International Harvester and two years in the U.S. Army, he joined the engineering staff on a Bureau of Mines underground mining operation in Virginia for eight years where he saw duties as mine surveyor, shift boss, and assistant maintenance superintendent.

Jan 1, 1977

Preceding the regular meeting, "Harvest from the Sky" was shown, an action-packed movie demonstrating how man and machines provide Denver with water. This vividly colored picture illustrated the magnitude of the job, highlighting the construction scenes at the 23-mile Harold D. Roberts tunnel, many scenes of which were taken underground at the face. Presiding was Mr. John Peperakis, Alanager, Sunnyside Operations, Kaiser Steel Corporation, Sunnyside, Utah, who called the regular meeting to order at 9:30. Mr. Peperakis introduced Mr. Otto A. Wiesley, Chairman, Industrial Commission and Utah Labor Relations Board, Salt Lake City, Utah, who spoke on "Functions and Policies of the Industrial Commission of the State of Utah." It was with obvious pride that he discussed the Medical Panel in use and the successful operation of the Indus- trial Commission in Utah, stressing the fact that the most important word in their vocabulary was "cooperation." (The text of his address appears later in these proceedings; see index for page number.)

Jan 1, 1959

By C. A. Allen

When the writers were asked to prepare a paper on this subject for this meeting of the Institute there was some question in our minds as to what to say that would be of interest to the members. You all know that Utah has some wonderful seams of good coal, on which have been opened some of the most modern mines in the United States, and that her coal operators have been putting forth many efforts to reduce losses due to accidents as well as disease. While I believe that the physical condition of Utah's mines is as good as in any other state we are not unaware of the fact that a great deal can still be done and we are always willing to frankly discuss the accident situation in the state. Dr. Murray has assembled some interesting figures showing the monetary loss due to accidents and disease which I will will proceed to give you to show the necessity of continued efforts in welfare work regardless of humane considerations.

Jan 1, 1922

By I. M. Charles

Mr. Chairman and Gentlemen: At the request of our Secretary, Mr. Shubart, I am pleased to present the following brief discussion of the Alamo Washery. In order to insure an excellent and uniform preparation of nut coal, the Alamo Coal Company erected last year a modern washery at a cost of about $50,000, in which, since the completion last December, all of the nut coal shipped from the Alamo Mine, has been washed. In part of the workings of the Alamo Mine, the coal is overlaid by a lenticular strata of slate, which invariably falls when the coal is shot down and breaks for the most part into fragments of such size as pass through three-inch round perforations, and are retained on plates having one and a fourth inch round holes with the nut coal. This "draw slate" comprises the principal impurity in the Alamo coal, and to remove it, some bone and a few small fragments of sandstone from the roof and floor, the washery was designed and erected. The few impurities contained in the lamp are readily re-

Jan 1, 1926

By D. Harrington

E. H. DENNY (United States Bureau of Mines, Denver, Colorado) In the absence of Mr. Harrington it is my privilege to read his paper, which is in his usual, forcible and sincere style, and it is within the province of this Institute, certainly, to go into it as it concerns safety and efficiency in mining. He brings out some points in his paper that, I think, are well worth the consideration of the Institute. The figures he uses were compiled by Mr. Adams, of the Bureau, and cover a five-year period. However, examination of similar Bureau figures for a ten-year period, or any other long period on other bases brings out similar results. The figures in this paper have been based on the million hours of exposure of accidents, and the figures based on three hundred working-man-day basis, or on tonnage, brings out similar results. This paper is entitled "Accident Record in Western Mines," and it is, in a way, an amplification of Mr. Harrington's letter which was read at the Glenwood Springs Meeting.

Jan 1, 1927

By William Perry Pendley

Let us go back in time, back to when a Navy veteran from the South was President of the United States, a man from the Rocky Mountain West was Secretary of the Interior and a leading environmentalist was head of the EPA; and there followed what many perceived of as a war on the West-on our water, on our timber, on our oil and gas and mineral exploration, and on our small communities. It's easy to think that I'm talking about the administration of James Earl Carter, III of Georgia, but I'm not. I'm talking about this administration, the administration of George Herman Walker Bush of Texas. I say that as a life-long Republican who never voted for a Democrat and who worked hard to put George Bush in the Oval Office. Many of us wondered, in 1988, what Vice President George Bush meant when he said; "I am an environmentalist." Well, now we know. In his State of the Union address, which was otherwise lacking in specific detail, George Bush said two very specific

Jan 1, 1990

forated, allowing the completion of the removal of wash water. When discharged into the washed nut bin, the coal is moist but carries so little water as to not be objectionable to the trade, nor to give any difficulty from freezing during the coldest weather. The rock and bone from the primary jigs is elevated to a 15-ton bin by means of a single strand scraper conveyor 40 feet center to center operating on a 45 degree incline, carrying 12" x 5" scrapers every two feet. This conveyor travels at a speed of 100 feet per minute and has a capacity of 17 tons per hour. From this bin, this material falls into the third or rewash jig similar in all respects to the first two, which discharges the rock waste directly into a 15-ton refuse bin below and the bone into a short dewatering conveyor which delivers into a similar 15-ton bin from which the bone is taken to the powerhouse. The oversize and water from the shaker screen, the water from the dewatering conveyor for both the washed nut and bone, and the sludge and wash water from the three jigs, are delivered by launders to the first compartment of a three-compartment settling tank. Most of the coarser broken coal is deposited in this tank, from which is it continually removed by a bucket elevator carrying 8" x 5" perforated buckets operated on a 60 degree incline at 200 feet per minute, capable of delivering 25 tons per hour to the 50-ton washed coarse slack bin. The water passes successively through the three compartments of the settling tank and from thence through a six-inch pipe to a centrifugal pump, circulating 900 gallons per minute against a 32-foot head. A four-mesh screen 30" x 72" in the third compartment of the settling tank removes the chips of wood, paper, and the other trash, which otherwise would accumulate in the water. Water is provided from the camp water system, deriving water from the well located in an arroyo bed. During the summer months just passed, the water used, has been 108 gallons per ton of raw nut, or 146 gallons per ton of washed nut. The water meter had not been installed last winter, but it is estimated that operating at capacity, the washery will be found to require only about 75 to 100 gallons per ton of raw nut. It has not been found necessary, nor advisable, to attempt to dry the sludge from the settling tank, nor to save the water from leakage of the tanks and bins. The sludge from the jigs is washed into the settling tank and the sludge from the settling tank is washed through a tile drain to the arroyo. The jigs, shaker screen, circulating pump, washed slack elevator, and the rock handling conveyor, are all driven from line shafts driven by one 40 H. P. motor, each jig driven through a clutch. The belt conveyor and the washed nut conveyor, have separate motor drives of five and seven and a half H. P. respectively. The washer is housed in a corrugated iron building, which is partially heated by steam coils. One attendant is required for operation, regulating the feed of the jigs, the supply of water, removal of the rock, and oiling and maintaining the machinery. The rewash jig is operated only intermittently. About eleven per cent by weight of raw nut is removed as waste and four per cent goes to the washed slack bin. No control analyses of the products have been made; the efficiency of the plant being determined only by the physical appearance of the products; but the washery has been a source of pride and satisfaction to all those connected with it. As mentioned before, it has caused no interruption of operation and it has assisted materially in creating an unprecedented demand for ALAMO nut. MR. CHARLES: If there are any questions, I shall be pleased to endeavor to answer them. MR. LITTLEJOHN: Mr. Charles, do I understand it is the nut only that is washed there? MR. CHARLES: Yes, sir. MR. LITTLEJOHN: What did you say the size was? MR. CHARLES: Through three inch round perforations, retained on

Jan 1, 1926

George B. Brennan, Secretary-Treasurer, Imperial. Coal Company, Denver, Colorado, opened the third session of. the Sixtieth Regular Meeting of the Rocky Mountain Coal Mining Institute at 8:30 a.m., and introduced the first speaker of the morning with the following remarks: It is a pleasure to welcome you here this morning. We are indeed fortunate to have such excellent speakers this morning, some of the outstanding people in the mining industry. I know I express the feelings of the entire RMCMI when I say thanks to these excellent speakers for all of the time and trouble they have taken to prepare such talks and come here to give these presentations of some of the more modern developments with which we in the coal mining industry are concerned. The first speaker this morning is going to give a paper on a subject which has only recently caused one or two of unfortunate accidents. It hadn't, prior to this, been considered such a serious problem. However, the. Bureau of Mines is hot on the trail to insure there will be answers to this previously somewhat unrecognized difficulty.

Jan 1, 1964

The 69th Regular Meeting of the Rocky Mountain Coal Mining Institute convened in Manor Vail Lodge, Vail, Colorado, and was in session at 10:00 a.m. The meeting was called to order by Past President Joseph E. Ward, former District Manager, Denver Office, Coal Division, Joy Manufacturing Co. and now retired. Mr. Ward, after reading a brief biography of President O. F. "Os" Lewis, introduced him to the assembly. Biographical sketch read as follows: Mr. Lewis is President, General Manager, and a Director of Colowyo Coal Company. "Os" was born in Reno, Nevada. He attended the University of Utah at Salt Lake City, Utah, and later the Denver University in Denver, Colorado. His career in the Western Coal Industry started back in 1923 when he was employed by the Central Coal and Coke Company of Salt Lake City, Utah, as a clerk, then chief clerk and as a traveling sales representative for a period of 13 years. Later, in 1936, when that company was acquired by an affiliated company of Harris Coal Company, he was transferred to Denver as Assistant Sales Manager, Purchasing Agent and later as Executive Assistant to the President.

Jan 1, 1973

By Edward Bottomley

Mr. Chairman and Gentlemen: I tried to get Benedict Shubart to have some fellow-some big fellow with a big voice-to read this paper for me, but he said there was nothing doing; [ ] that I would have to read it myself. I will try and not take up too much of your time. It is a pretty big subject, Mechanical Loading, and it covers a good deal of ground. I have merely touched on the high spots, as it were. A great deal has been preached and written in the last year or so about mechanical loading, and I doubt if any other subject in the mining industry has been discussed so freely and as often in the last few years. It is not the intent of this paper to dwell on the merits or demerits of any [ ] particular type of loader, that is, to say what the writer thinks is the most efficient or most inefficient machine. There are several types of loaders on the market to-day that are proving very successful in many mining districts. Some of these, five or six years ago, seemed to be a miserable failure from every standpoint, mechanically

Jan 1, 1926