Search Documents

The 1942 meeting will be held in Salt Lake City, June 10,11, and 12, at the Hotel Utah. ... If you have any suggestions for the program, send them to the Secretary at once.

Jan 1, 1941

To be held in Denver Probably in June. The correct dates will be announced later IF you have any suggestions for the program, send them to the Secretary without delay.

Jan 1, 1942

PRESIDENT MOSES: I thank you, Mr. Emrick. Mr. Shubart would like to supplement your paper with another article. SECRETARY SHUBART: My paper really should not supplement Mr. Emrick's paper, because I secured some data from him, I knew Mr. Emrick had had a great deal of experience in shearing and I thought he could give you some useful data. (Here Mr. Shubart read the following:) "For the past two years, there has been considerable discussion among coal mining men concerning the advantages of a shearing cut in addition to the undercut, in mine work. We have had a number of requests for information on sheared coal. We were asked questions like these: What percentage increase in lump can be obtained from sheared coal? What has been the experience of mine men who have employed the shearing cut? Is the shearing cut a means of increasing the lump content? If so, is it increased to such an extent as to warrant the installation of shearing machines? Upon investigation it was found that no one could give us any definite information on the subject as no one had weighed separately the grades of coal produced from' the shearing cut. With a view of getting this information first-hand, the Goodman Manufacturing Company built up a shearing machine to be used in experimental work only. The officials of the Troy Coal Company were eager to share in the expense of obtaining this information, so that in May of this year we shipped to their mines our first type 319 shearing machine. The Troy Coal Company operates a mine at Troy, Illinois, in the No. 6 seam and produces about 275 tons daily. The coal seam averages five and one-half feet in thickness. Previous to the arrival of the shearing machine the coal was undercut six feet deep by a' Goodman Shortwall Machine. To break down the coal required two shots in the entries and three in the rooms. The percentage of lump measured over two-inch screens, averaged 58.2 per cent. The conditions of the mine were very favorable for obtaining accurate weights on the amount of lump and slack coal run over the shaker screens. The shearing machine easily cut the entire tonnage of the mine so that all coal dumped into the railroad cars had been produced from a shearing cut, in addition to an undercut. Accurate records were kept of the railroad weights and front this data the percentages of lump and slack were computed. During the month of June the percentage of lump produced over two-inch shaker screens was 69.9 per cent. This result demonstrated that the introduction of the shearing cut had increased the percentage of lump twenty per cent. The entries were driven ten feet wide and the rooms thirty feet wide The shearing cut was made near the center of the face in all places. A hole was drilled in each rib and the coal shot down with one-half the powder required when the places had been undercut only. The coal was broken down to the back of the cut so that very little pick work was necessary to load it out. The benefits derived from the shearing cut were as follows: 1. Increased percentage of lump, thus increasing the average price of coal per ton. 2. Preservation of a tender top due to the decreased amount of explosive used. 3. Facilitated handling of coal by the miner thus increasing the tonnage per man. 4. Eliminated coal yardage in entries and crosscuts of ten feet or less in width for the reason that the shearing cut provides a loose end from which to shoot the coal. This applies to the union fields only, as the non-union mines do not pay for coal yardage. Based on a price of $2.50 for lump coal and $1.25 for slack coal, the average price per ton was increased

Jan 1, 1926

By John M. Jennings

The Hiawatha pitmouth is located at the head of the middle fork of Miller creek, at an altitude of approximately 8,100 feet. The coal is lowered to the tipple down a gravity tram two miles long, in 16 car trips which carry about 60 tons net. The average running time of the trip is about nine minutes. At the bottom of the tram there are two tracks for the loads and two for the empties. The trip, after being cut off the rope, is dropped by gravity onto a feeder, where the cars are uncoupled and fed one at a. time across the pitcar scales and into the dump. The dump is of the full revolution type, friction driven. On passing out of the dump the cars are returned by a kickback onto the empty car haul. They are caught at the bottom by a brake which consists of a pair of steel squeeze blocks operated by heavy springs. The empties are elevated to the double tracks, where the trips are made up. The feeder, scales, dump and empty car haul are all built on the solid ground of the hillside instead of being incorporated in one structure with the screening plant. The coal is dumped into a small hopper with a capacity of about 15 tons, whence it is fed by a reciprocating feeder onto a scraper conveyor which takes the coal over to the screening plant, a distance of 120 feet. This conveyor is 48 inches wide and travels at 120 feet per minute. The screen itself is interesting. It is of the Marcus Horizontal type.

Jan 1, 1925

[ATZ, Inc. American Mining Congress Anaconda Minerals Company Andalex Resources, Inc Arapahoe Energy Consultants Atlas Powder Co Becor Western Inc. Mr & Mrs. Bernard Bernstrom Black Beauty Resouces British Mining Consultants (USA) Limited]

Jan 1, 1988

By Thomas Foster

One of the most dreaded things which mining men sometimes have to contend with is underground mine fires, which are both dangerous and expensive. In the Reliance mines we have had considerable trouble with mine fires. We have at the present time five different fire zones, three of these zones give us considerable trouble and the other two have not given any trouble since they have been walled off. Fire Zone No. 1 comprises No. 2, 3 and 4 South Entries, about 50 acres are enclosed in this zone. Fire Zone No. 2 comprises the main drift entry from the mouth to the Old Boundary Plane and extends to the crop line, about 10 acres are enclosed in this zone. Fire Zone No. 3 comprises 1 and 2 North Entries from the main slope to the Old Boundary Plane, a distance of about 1,200 feet, about 15 acres are enclosed in this zone. Fire Zone No. 4 comprises 11/2 and 2 North Entries, a distance of 1,100 feet between New Slope and Old Boundary Plane, about 15 acres are enclosed in this zone. Fire Zone No. 5 comprises the inside end of No. 11/2 and 2 North Entries and 3 North Entry from the New Slope to 30 room, a distance of about 2,600 feet along No. 3 North Entry, about 20 acres are enclosed in this zone. The first mine fire started in No. 2 South Entry in No. 1 zone in 1914. Inside of No. 7 room on the high side of the entry, there was a soft piece of coal. There were no rooms driven in this coal and one day a fire was discovered in the solid pillar on the high side of the entry, work was started at once to load out this fire. and several places was driven into the pillar and cribs built where the coal was taken out, but this method proved a failure and a sand pack was put up along the entry between the track and the high rib. This consisted of timber set about 3 feet from the rib and 2-inch boards put behind the timber and sand or adobe put in between the boards and the ribs, and this method gave very good results except that it required close watching as the sand would settle and let the smoke out between the roof and the sand. Fire broke out in No. 3 South Entry in No. 1 zone in the summer of 1919. We sealed this fire off by building 36 fire stoppings, which also enclosed the fire in No. 2 South Entry and we have never had any trouble with fires in this zone since it was walled off. The fire started in No. 2 -zone in 1919 and has been very active ever since. When this fire was first discovered we built new stoppings in front of the old one in the room necks; we also opened up some of the room necks and loaded out part of the burning coal and rock but this did not help any, the fire, would burn out around the stoppings also burn along the roof between the top coal and the roof sometimes nearly across the entry. Several holes were drilled from the surface to the fire area and flushing the fire was tried but this was also a:\, failure, the rock above the coal was so hot that the mud would dry in the hole and fill it. In 1921 we started to take down the top coal along this entry, timber the entry and put 2-inch boards behind the timber and fill in between the coal and the boards with sand or adobe. We have at present over 1,000 feet of this work done and it has given us better results than any other method that we have tried. As the coal burns out behind the timber the weight breaks the timber and it is necessary to renew some of it. Fire broke out in No. 1 North Entry in No. 3 zone in 1922. There was a stopping in this entry that had been put in when the entry was finished some few years before. The fire burned around the stopping on the low rib of the entry, we built another stopping in front of the old one taking down the top coal and extending it up to the roof also digging in both ribs and setting the stoppings into the coal about 18 inches. This fire did not cause any trouble until June, 1924, when we discovered this fire was very active on the inside

Jan 1, 1924

TABLE ONE Accidents occurring in the Coal Mines of Utah by fiscal years: [Deaths ........................ Permanent total disability ...... Permanent partial disability. .... Temporary disability: .......... 28 days and over 14 to 28 days ............... 4 to 14 days ............... Under 4 days ]

Jan 1, 1922

By J. M. Shafer

Jan 1, 2005

Jan 1, 2005

By T. H. Brien, O&apos

At nearly all of the copper smelters in the Southwest, at some time, calculations have been made having in view the economy of replacing fuel oil with pulverized coal as a heat-producing medium for smelting operations This matter has been, and is more so now than at any time heretofore, of very great importance. Due to the intensive development of oil-producing areas of the world and the tremendous use of fuel oil for many purposes, it seems that before many years the supply of oil will become so small as to prohibit its use for such operations as smelting. This may be caused by prohibitive prices, or even by government decree as a conservation measure. In the event that the use of fuel oil becomes out of the question, the copper companies have just two alternatives: the use of pulverized coal or electricity. The copper companies of the Southwest produced an average of 808,400,000 pounds of copper per year for the war years of 1916, 1917 and 1918. This figure is, of course, a higher one than has prevailed since the war, but at the present time nearly all of the mines and smelters are getting back to capacity. There is no doubt whatever that the consumption of copper is going to increase, perhaps for the next ten years. This means that more copper mines will be discovered and developed, and that the mines which are now producing will be called upon for a greater production. This all tends to show that the mine manager who is looking ahead must develop some substitute for fuel oil in the event of its use becoming prohibitive, and all indications seem to point in that direction. The only coal which is commercially available to the smelters in the district under discussion must come from Colorado and New Mexico. These coals are high in ash and volatile matter and comparatively low in calorific value. The proximity of the smelter to the coal mines is a large factor in determining which fuel is more economical. Most of the smelters within two or three hundred miles of the coal mines find it more profitable to burn coal, while those at greater distance find that the higher freight charges on the coal make the use of oil more economical.

Jan 1, 1923

By Kirk Nobis

Develop a Risk Management Plan for Your Mine ? Why? ? Measuring ? Managing ? Conclusion

Jan 1, 2006

By C. B. Huntress

"We have ourselves to blame in the steel industry for our condition." These words were addressed twelve days ago by James A. Farrell, President of the United States Steel Corporation, to his "comrades" at a meeting of the American Iron and Steel Institute. They carry a note of challenge to all industry, and particularly to the coal industry, where they point the way to the pressing need for operators everywhere to get their feet under one table. It is that note which I would stress to all producers. You have yourselves to blame for your condition. True, there are inter-district competition and competition of substitute fuels, but they'll always be with us, more or less, and the only sensible, sane course is to remove the evils within our respective districts, which can be done only by constructive effort along cooperative lines. It's the same story in Alabama, the same in Illinois and elsewhere. The larger number of the men gathered here are at the front, as it were, in the business of mining coal. They are the men who are doing a remarkable operating job. And naturally, the sessions of this annual meeting treat of news from the front, of technical problems. But, as in actual warfare, those at the front are often uninformed of developments in the rear. They keep on fighting without fully sensing the significance of a disaster at headquarters. You've played your eighteen holes today and evidenced the efficiency of your technique in the, production of coal. It is not amiss to take advantage of this moment, the nineteenth hole, to ponder over what it's all about. After all, what do improvements in the art of mining mean if business policies engulf you in red ink? To the extent that mechanization is a factor in increased overhead, which in turn increases the pressure to produce regardless of market demand, it only aggravates our troubles unless there is the controlling influence of coordinated effort.

Jan 1, 1931

Thomas J. Parmley C. N. Sweet T. C. Jenkins W. S. Iliff, Sr. Warren Bracewell L. C. White Fading away like the stars of the morning, Losing their light in the glorious sun; Thus would we pass from earth and its toiling, Only remembered by what we have done.

Jan 1, 1947

By Benedict Shubart

The subject of this paper may seem threadbare to, many of you, but even if I repeat what you already know, just smile to yourself and think how much wiser you are than your neighbor, for it is startling what a number of tipples are erected that violate the elementary fundamentals not only of good design but of practical operation. Possibly a coal screening plant is a simple plant. If so, we treat it like we do a great many other simple things. We treat it entirely too lightly and fail to take into consideration, not only the changes that may occur later, the conditions we may be compelled to meet as competition changes, but even the elementary physical conditions that exist right at the tipple site. If I get too positive over some particular point, don't blame me, but remember some of the heart-breaking experiences we have had correcting these omissions, trying to make a tipple do merely what it was designed to do, when the builder tied everything up in such a constricted space, that no room was left to get the results he must have. Perhaps some of the things will look too expensive. Don't say that you can't afford them. Many of them you can't afford to do without, and when you figure that a tipple is put up for possibly twenty years of operation, you can't afford to omit any reasonable precaution not only in taking care of the present, but in foreseeing the future. We will consider a tripple screening plant, suitable for Western conditions, capable of handling approximately 2,500 tons per eight hours. The largest screen sizes must be loaded into either open cars or box cars, and arrangement provided for screening and loading not less than five sizes of coal: lump, egg, nut, slack, dust, or any reasonable combination of these. As we are considering only the preparation of the coal, we will omit all consideration of the method of haulage, pit cars, methods of dumping, and will take the coal after it is in the dump hopper. The track arrangement will frequently be determined by the ground layout. Our sizes and tonnage can be loaded on three tracks, but four tracks are better. The two outer tracks should be left for loading lump coal, No. 3 track should be left for egg coal, and No. 4 track for loading nut, slack and dust. Where a fifth track can be provided, No. 5 track should be held open only for run-of-mine coal, to act as a storage where emergency coal can, be run, should there be any delay in the screening equipment or in changing cars. Track No. I should be used for loading lump coal into box cars only. Track No. 2 should be used for loading lump coal into open cars only, and may or may not be provided with picking table, loading boom, or both. Where picking is necessary, a picking table can frequently be put between the two "lump tracks, heading down track, pivoted at one end, so it may be raised or lowered to feed either open or box cars; with

Jan 1, 1921

The Role of Partnerships ?Industry history ?Companies were their own kingdoms ?MSHA and NIOSH were out of touch and focused on enforcement with no direction ?Labor and management were constantly at odds with each other

Jan 1, 2002

Allen & Garcia American Mining Congress American Steel and Wire Company Blue Blaze Coal Company Bogue Supply Company Brandenberger, L. Burke Company, J. J

Jan 1, 1929

By Geo. A. Brown

This paper was written from conditions existing in the Cumberland Mines of The Union Pacific Coal Co., with my impressions and cause of same. These mines are located on a branch line of the 0. S. L. R. R., about sixteen miles south of Kemmerer, Wyoming. The mines are the property of The Union Pacific Coal Company with headquarters at Rock Springs, Wyo. There are two mines, No. 1 and No. 2, located about two miles apart in a seam of coal averaging about 16 feet thick which is split with a parting of rock from 4 feet to G feet from the bottom, averaging from 4 inches to 5 feet thick, mostly of soft fire clay, with an average pitch of 21 degrees to the west. The lower coal below the fire clay band being of a soft nature, much softer than the coal above it. The cover or roof next to the coal is of a massive sandstone formation from 4 feet to 60 feet thick while the floor of the seam is of a soft fire clay as far down as has been prospected. These mines are also of a dry and dusty nature, they generate lots of fire damp and are subject to fires from numerous causes. These mines were opened up in 1900 with five openings each, Main Slope, North and South Manways and North and South Aircourses driven parallel directly on the pitch of the seam which is fairly regular, entries being turned North and South at right angles off the slope about 300 feet apart. The entries were driven double 10 feet wide with chain pillars from 20 feet to 30 feet thick. The main entries are used for haulage and main intake, back entries for return aircourses. Rooms are turned on 50-foot centers and 20 feet wide, directly on the pitch Galvanized sheet iron chutes are used in the rooms. The slopes were driven down in No. 1 mine about 4,000 feet, in No. 2 mine about 5,000 feet where the cover would be about 1,400 feet in No. 1 mine and about 1,700 feet in No. 2 mine approximately. When a point about 2,000 feet on the slope had been reached with cover, 600 or 700 feet squeezing became noticeable on the entries and room pillars with slight bumps which extended clear to the upper entries of the mines and continued to get worse as the mines got deeper and with more cover as no pillars had been removed at this time. It should be stated here that faulty ground was found on the south side of No. 2 mine and on the north side of No. 1 mine, in some places looking like a fault of a down throw, some places like a want and other places like an erosion. The latter theory seems to be correct from prospecting and drilling. The mining of entries and rooms became more difficult with more squeeze and bumps of increased pressure which closed entries and aircourses and finally caused the lower workings of the mine to be abandoned. It was then decided to open up the entries from the 6th up, or approximately half way up the slope. The opening of these entries was started with the intention of extracting pillar coal but considerable danger was met with for the entries .were squeezed tight and when they were disturbed, bumps and squeeze conditions had to be contended with, also gas and fires due to the continued grind on the pillars due to overhead pressure bringing on friction which caused innumerable fires to start in the bottom coal. Bumps being so extensive at times as to close up aircourses for 500 or 600 feet, also discharge timber, coal and rock from the rib of slope and entries for hundreds of feet, dislodging tracks and throwing mine cars around just as if an explosion had taken place, filling places with gas and throwing dust into the atmosphere so that you could cut it with a knife. It became necessary to discontinue the use of black powder and naked lights entirely as a safety precaution. Permissible Powder Monobel No. 5 and Wico Electric Safety Lamps were installed. All coal was shot off the solid whenever it was necessary to shoot. ' In opening up these entries it was found that practically all of the weight was centered on room pillars up to the first crosscut chain pillars and barrier pillars between top of rooms of entry below and the one above which averaged 30 feet thick and in all practically 120 feet of ground. The rooms were mostly open from the first crosscut up to the face which showed that the points mentioned had taken the weight. It was found impossible in some of these entries to drive double entries again as the bumps and squeeze made it impossible to maintain them. This made ventilation quite a problem, small booster fans and flexoid tubing being used for ventilation until one entry could be connected with the one above which has solved most of our ventilation problems so far.

Jan 1, 1924

H. C. GLAZE: There is no question in my mind that the day of direct current distribution is practically ended so far as large coal properties are concerned. Another thing that Mr. Drennan touched on that is of the utmost importance, is that of voltage-voltage to the various pieces of equipment inside the mine. You all know how expensive it is to have motors in operation in important places where the voltage .is about half that which the motor should have. This is particularly true in the direct current system. It slows down production, causes burnouts and destruction to apparatus, and is a question that you men have got to go into. It costs a great deal of money, as Mr. Drennan pointed out, to take care of this. The wires are large and cumbersome, while; on the other hand, with an alternating current system you can use a minimum amount of wire. We have installed this class of equipment with so-called "pick-proof" cable of 2,200 volts down slopes, and I have never heard of any trouble whatsoever from this cause.

Jan 1, 1923

By Kraig R. Naasz

Jan 1, 2008

By Andrew Franklin

The eightieth regular meeting and convention was called to order by the President, John T. Atkins, at 9:15 a.m. Monday, June 25, 1984 in the Colorado Ballroom of the Marriott's Mark Resort in Vail, Colorado. President Atkins welcomed the members and their guests to the convention and noted that the annual business meeting would be held Tuesday afternoon at 2:00 p.m. in the same room. A convention update was made by the Conven¬tion Liaison Officer, Loren V. Linville. This was followed with a program report by the Program Chairman, Doug Ingram. The chair then called on Clifford Barrett, Upper Colorado Regional Director of the Bureau of Rec¬lamation of the United States Department of the Interior. He presented the Bureau's Citizen Award to RMCMI former president Ira E. McKeever for his outstanding contributions to the joint private/ Federal effort and the open planning process for AQUATRAIN. According to Barrett, "from 1981 to early 1984, McKeever led private industry work in the AQUATRAIN project, a proposal for a 1,400 mile long pipeline system. AQUATRAIN was conceived as a possible alternative to solve the government's problem of rising salinity levels in the Colorado river, as well as the private sector's need for a more economical coal transport method. The Citizen Award cites McKeever's efforts in developing a model for future cooperative ventures between government and industry that can benefit the nation." Following this presentation, the formal program of the 80th meeting and convention began with the president, John Atkins, introducing the convention kickoff speaker, Andrew Franklin, President of Nerco Mining Co., Inc., followed by the convention keynote speaker, Dr. Margaret N. Maxey of the University of Texas. These speeches are printed in this Proceedings together with those of all other convention speakers. I'm Andrew Franklin, President of Nerco Min¬ing Company, and I'm delighted to be here to kick off the annual convention of the Rocky Mountain Coal Mining Institute. This has always been a very special convention in my eyes and I'm sure this year's will be no exception. I am also here to share my thoughts on the western coal industry and how we're all affected - for good and bad - by public policy decisions. Although the title of my talk is "Western Coal: An Industry Under Siege," I believe a more accurate title might be "Western Coal: The Pit and The Pendulum," because of the wide swings in public policy and coal development in the past 15 years which have cut a zigzag path for growth over this period. As one of the nation's largest coal producers, Nerco is well aware of the problems facing western coal production. Nerco Mining Company is the western coal mining subsidiary of Nerco Inc. We have been "in coal" for more than 25 years through our parent company, Pacific Power & Light. To state my conclusion at the outset, I feel it's extremely important that consistency and common sense should guide our national policy for the development of valuable energy resources. In particu¬lar, we must reduce the wide swings in government policy and activities which have affected energy development. In short, we must decide what kind of game we're playing so that the "players" and the "referees" can keep their eyes on the "ball." Business today faces two main types of uncertainty market uncertainty and public policy uncertainty. As businessmen, we expect and are used to facing the familiar challenges and uncertainties of the market in which we operate. Over the past 10 years, the market has appeared to be bullish on coal. But the facts make our future less rosy. Last year, western coal producers faced over 50 million

Jan 1, 1984