Search Documents

By W. D. Siapno

Marine mineral resources have been reviewed in great detail on numerous occasions over the past few years. A summary of these efforts would indicate there is little new on the horizon as far as economic programs are concerned. Deep ocean minerals, though not forgotten, hold little promise for development in the immediate future, i. e., manganese nodules, cobalt crusts, polymetallic sulfides, etc. Nearer to shore, within the EEZ, and particularly within waters under state control greater industrial interest is expressed. Interest in sand and gravel not only persists but is growing, dependent largely upon the construction industry. Precious metals demonstrate the greatest growth potential.

Jan 1, 1988

By N. Wang

The City of Honolulu mines sand from nearshore deposits for beach maintenance. The suction dredging operation creates a discharge plume which is carried by currents and other motions until it settles out of the water column. The dispersion of such a plume is influenced by distribution of particle size, as well as site dynamics. Interest in dispersion characteristics stem$ from concern about possible deleterious influences of such a plume on the nearshore environment. The behavior of such plumes has been modeled by Brandsma and Divoky (1976), as well as others. This study is an attempt to calibrate a plume model (modified from Brandsma and Divoky's model by Wang), using concentration, turbidity, and fluid velocity measurements of a small plume taken under field conditions. This calibrated model could then be used to predict dispersion characteristics of a much larger plume. Sand suction-dredged at a depth of 12m with a four-inch pipe and discharged at midwater was used to create a test plume closely simulating the conditions found during regular mining operations. Water samples containing suspended material were taken at varying distances from the discharge, from which concentrations were measured in the lab. Transmitted natural light measurements were used to provide estimates of turbidity. Current velocities were measured using current meters, as well as drogue-following methods. These data were then used to help estimate the vertical diffusion coefficient in the model.

Jan 1, 1991

By Rolf B. Pedersen, Ingunn H. Thorseth, Håkon Dahle, Ingeborg E. Øklandm, Linn M. B. Olsen

Weathering of sulfides and the generation of acid mine drainage (AMD) is a well- known environmental issue in on-land mining. The process can release potentially toxic compounds and heavy metals to the environment and is highly influenced by microbial activity. However, the weathering of sulfides in deep-sea environments is not well studied. In 2014 we therefore deployed two titanium incubators filled with freshly ground pyrite grains into an inactive part of the hydrothermal sulfide mound of Loki´s Castle vent field, aiming to study the in-situ seafloor weathering of the freshly exposed sulfides. Each incubator had five chambers placed in a depth profile, where the upper chamber was exposed to the bottom seawater. After one year of exposure, one incubator was collected and analyzed for weathering features and microbial colonization and community composition. In addition, one sediment core (25 cm deep) was collected from the sulfide mound in close vicinity to the incubators, and another core (45 cm deep) was collected from the (hemi)pelagic sediment just outside the sulfide mound. The cores were analyzed for geochemical composition of the solid material and porewater, and the microbial community composition aiming to define the redox zoning and dominating geomicrobiological processes in the natural deposits, and to unravel how these processes influence the mobility of heavy metals during sulfide weathering. Scanning electron microscopy (SEM) revealed development of Fe-oxyhydroxide weathering rims on the pyrite grains in the incubator chambers. Spalling of the rims on the most weathered grains, exposing fresh pyrite surfaces to oxidation, was commonly observed. The SEM investigation also revealed a positive correlation between weathering degree and microbial community density. Preliminary results from the microbial community analysis show a high relative abundance of putative sulfide oxidizers, suggesting that the community is governing the degradation of pyrite.

Jan 1, 2018

By Mike Woodborne

The marine diamond industry off south-western Africa is maturing rapidly. Some of the larger explorers have reached an advanced stage in their resource development and new mining operations have been started in the last year. Most of the major exploration, mining and marine engineering companies have offices in Cape Town. As a result of the increased activity and experiences to date, new approaches to marine diamond exploration and mining are now evolving. Primary factors contributing the new approaches are namely 1) the concentration of expertise in a localised area 2) the significant increase in the base of available exploration and production results and 3) parallel advances in the marine engineering design and geophysical survey equipment. The sea floor geology and setting of the marine diamond exploration areas is now better understood. Consequently the strategy for exploration and the selection of appropriate survey equipment is improved. Due to new equipment developments, different exploration alternatives now exist, depending on the programme objectives. Significant advances have also been made in the data processing and modelling undertaken to assist in the identification and targeting of potentially diamondiferous prospecting features. Similarly, the design of appropriate prospecting tools and programmes has also been improved. Following exposure to the requirements of the marine diamond industry, the design engineering and operating companies have responded with innovative designs for new prospecting tools. In recent years the availability of relevant information on marine diamond prospecting and production has increased. As a result, there is now sufficient basis for the construction of meaningful financial valuation models that can be effectively used to control and guide the exploration projects, to the benefit of both the explorer and the investor.

Jan 1, 1998

By Katsuya Tsurusaki

Commercial mining of manganese nodules is expected to begin within the next 20 to 50 years in large areas of abyssal sea floor in the Pacific Ocean. While deep sea mining is expected to realize significant quantities of rare metals that are needed for modern technology, the mining operation will cause extensive resedimentation over large areas of deep sea floor, the effects of which are thought to be harmful to the benthic community. Our present knowledge of deep sea benthic ecology is so limited that we cannot predict the magnitude of the impact. In November 1994, the United Nations Convention on the Law of the Sea was enforced and giving added impetus to improving our understanding of the effects of future mining operations. In order to fully understand the impact of deep sea mining and to mitigate the harmful environmental effects, it is necessary to accumulate more information on the deep sea environment and benthic communities. To achieve these objectives and to understand the relationship between resedimentation and biological reaction, artificial impact experiments are being conducted by the USA and Germany. The former named BIE (Benthic Impact Experiment) began in 1991 and is being performed by NOAA (National Oceanic and Atmospheric Administration of the United State of America) in the North Equatorial Pacific Ocean. The latter named DISCOL (Disturbance and Recolonization Experiment in the Deep South Pacific Ocean) was started in 1989 and is being conducted in the South Equatorial Pacific Ocean by a scientific group from Hamburg University. The Metal Mining Agency of Japan (MMAJ) is also carrying out environmental studies. These studies, commenced in 1989, are being conducted in association with NOAA and include an experiment named the Japan Deep Sea Impact Experiment (JET).

Jan 1, 1996

By Alexander Malahoff

Mineral zonation studies were conducted on hydrothermal vents of two hot spot volcanoes. One study site is located within the Axial Caldera of the axial hot spot volcano of the Juan de Fuca Ridge. The young high-temperature hydrothermal vent field consisting of two polymetallic sulfide chimneys, five meters high, located at 130°01.5'W, 45°56.5'N, along a fault complex at the base of the southwestern wall of Axial Caldera was sampled during four ALVIN dives in 1983. Temperatures of up to 270°C were measured within the orifice of one of the chimneys, which was then broken off and recovered with the submersible. Both black and white "smoke" was observed to be emanating from the one chimney sampled. The high-temperature chimney extends directly from a field of broken lobate lavas which are located at a water depth of 1,550 meters, about 200 meters east of the caldera wall. The chimney makes one of the shallowest active high-temperature vents studied to date. The vent is surrounded by clumps of vestimentiferan worms and is located within an elongate field of red-colored iron smectite blankets and chimneys. The low-temperature field forms a ribbon 150 meters wide, extending for about 1,300 meters at the base of the wall. Chemical analyses of the hydrothermal deposits ranging from the polymetallic sulfides of the chimney to the outer zones of the low-temperature field show a range of elemental assemblages consistent with temperature zonation around the vent. Chemical zonation within the high-temperature

Jan 1, 1988

By Carl H. Hobbs

The needs of the on-going basic maintenance operations and proposed enhancement and hurricane protection projects in the City of Virginia Beach exceed the capability land-slide sources of sand. Through the past several years our studies have concentrated on locating and defining suitable quantities of sand appropriate for use on the area's beaches and assessing some of the consequences of dredging in shallow offshore areas. By providing information concerning the geological setting of sand resources, the local wave climate, and benthic infauna, the overall research project has strengthened the knowledge and understanding of several facets of Virginia's inner continental shelf. We have identified three distinct settings for deposits of beach-quality sand, two of which (filled channels and surficial shoals) are distinguishable in relatively unprocessed sub-bottom profiles and cores. The third, a sand facies within a larger stratum, is discernable only with a suite of cores. Sandbridge Shoal, about 5 km offshore of the resort and residential community of Sandbridge appears to contain a substantial quantity of sand that could be exploited with comparatively few problems. It already is designated as the source of material for use in a shoreline protection protect for a federal facility. Fluvial(?) fill of a late Pleistocene channel lust offshore of the main, commercial, resort area may offer a proximal alternative to existing and proposed resources. Ongoing work to describe the local wave climate and the possible impacts of anthropogenic alterations of the bottom topography on wave transformation and studies of the biological community as it might be affected by dredging will help fill-out our series of studies. Prior to utilization of the resource additional work is needed to provide better definition of the limits and magnitude of the sand bodies. Finally decisions concerning the use of specific resources will have to include physical, biological, economic, technical, and social considerations.

Jan 1, 1996

By Daniel E. Walsh

The recovery of most minerals, which are amenable to gravity concentration, is standardly determined by accurate sampling and assaying. .With respect to particulate - gold ores, sampling and assaying are still the convention, but the accuracy and reproducibility of these operations are much discussed and debated points. Evaluation of gravity concentrators by conventional sampling and assaying techniques is very time consuming, costly and may introduce a large amount of uncertainty into the results due to the particulate nature of placer gold. These problems are not unique to placer gold ores and apply to any low grade ore with particulate values. A gravity concentrator evaluation process developed by MIRL employs the use of neutron activated gold (198Au) and radiation detection circuits which monitor the concentrator's product pulp streams. Concentrator recovery is determined from the ratio of the number of gold particles detected as passing into the concentrate to the total number of gold particles detected over all monitored pulp streams. This system eliminates the experimental errors introduced by sampling, sample reduction, and assaying and allows recovery to be evaluated for gold particles of specific sizes, shapes, and flatness. This system enjoys its greatest utility where a large number of tests are to be run in order to evaluate a concentrator over a variety of operational settings, i.e. factorial designs, and allows accurate testing of concentrators operated in closed circuit systems. Beginning in 1984, MIRL conducted radiotracer studies of unit processes, which included jigging, static wedge wire screening, elutriation, and concentration with compound water cyclones.

Jan 1, 1989

By Maria Thornhill, Rolf Arne Kleiv

INTRODUCTION The last decade has given rise to an increasing number of deep-sea mining concepts (DSMCs) outlining technical solutions for the production chain from seafloor mining to mineral or metal extraction. The vast technological and logistical challenges coupled with immature but rapidly evolving technology has spawned a great variety in proposed concepts, and the exact implications of the phrase ‘best available technology’ is very much an open question. DSMCs differ significantly with respect to choice of technology, technological readiness level, degree of resource utilization, logistics, OPEX and CAPEX requirements, overall profitability, legal and political implications, not to mention environmental impact. Hence, a system for classifying concepts could provide a useful identification and structuring tool when performing economic, judicial or environmental assessments of DSMCs, as well as offering a general terminology to describe concepts sharing fundamental traits. This abstract proposes a DSMC classification system based on how a concept makes use of mineral separation at the different stages in the ore’s journey from the deposit to the ocean surface and ultimately to onshore facilities. Mineral separation, as a process step, is the key factor in determining both the state and mass flow of materials along the production chain and has, as such, a decisive effect on economy and environmental impact of any deep-sea mining project. A DSMC that is based on bringing the entire volume of broken ore to onshore facilities for processing will look very different from a concept based on pre-concentration (i.e. mineral separation) at the seafloor. Whereas the latter offers savings in the form of reduced energy cost for vertical transport, it also represents a substantial additional technological challenge. Furthermore, whether or not a concept relies on mineral processing at the seafloor or on a floating facility at the ocean surface above the deposit also determines the point at which mineral separation waste (i.e. tailings) must be managed. Different concepts offer different opportunities for tailings deposition, and are at the same time bound by different requirements.

Jan 1, 2018

By Sup Hong

"Lifting riser in deep-seabed mining (DSM) is exposed to acute and chronic stresses of materials, whose yield will result in the most critical loss of total mining system. For freehanging riser (FHR), the axial vibration and local bending of riser may produce acute stresses, in the meanwhile, vortex-induced vibration (VIV) in relative current, friction and collisions of solid particles with inner-wall, and material corrosion in seawater are representative causes of chronic stresses. The chronical stresses bring about fatigue failure or abrupt failure by material loss. Hydraulic lifting is effective and promising for transportation of minerals, however, ecofriendly treatment of operating seawater is an unease hurdle to come over. Sizing of riser section confronts multi-directional problems, i.e. safety of slurry transportation (flow assurance), material safety of riser (wall thickness), seawater treatment on board, etc.A free-standing riser (FSR) might exclude a part of design problems of free-hanging riser and give a way to sustainable mining. FSR stands vertically by means of sub-buoyancy part(s). The top of FSR emerges above sea surface and is connected with mining platform through jumper line (supported by external yoke). Total amount of sub-buoyancy and location(s) have to be carefully determined in viewpoints of dynamics of FSI (fluidstructure interaction) in waves and currents. The concept of FSR gives more freedom for design of multi-functional riser system in view of sustainability of DSM. In DSM, sustainability concept may be focused on eco-friendly treatment of seawater and sediment, and safety of total mining system. For feasibility of FSR, however, installation, maintenance and repair need to be investigated thoroughly in collaboration with industry experts"

Jan 1, 2017

By William Siapno

Manganese nodules, as metal ores, have for the most part been cast aside from further consideration within this century. However, in the decade of the 90s, rising demand at all levels of society, for clean air give nodules a new - lease on life as a stack gas cleaning agent. Further, the Clean Air act of 1990, mandates enormous outlays to bring systems into compliance with new stringent standards. Quick corrective actions are imperative. Research beginning in the 1960s proved nodules possess unique qualities to remove acid compounds from stack gases. Early this year, the National Science Foundation awarded General Electric an $83 million contract to design a system to extract oxides of sulfur and nitrogen from coal fired power plants. Environmental damage is abundantly evident on the ground, from the air as well as form space. A dirty pall of yellow-brown smog is smothering both animal as well as plant life around the globe. Losses run into billions!

Jan 1, 1991

By Jerry Hanua Naime

Papua New Guinea has permitted its first underwater mine. Nautilus Minerals (PNG) Limited is the company permitted to operate the Solwara 1 project. The project is located 30km off the nearest island of New Ireland in the Bismarck Sea. The successful permitting of the activity was due to the existence of a broad legislative framework and the collaborative efforts of stakeholders. Challenges faced included the lack of specific guidelines or policies for underwater mining; lack of existing technology and/or mining method; lack of benefit sharing mechanism for such a project and management of the perceptions of local communities that fear environmental degradation by the mining project. This presentation shares the experience of Papua New Guinea?s first under water mine. A background of the country, the project and the legislative framework are presented. Followed by the challenges and approach taken to permit the project.

Jan 1, 2010

By R. K. H. Falconer, Wood R. A., C. D. Castle

"A deposit of phosphate nodules is on the Chatham Rise approximately 450 kilometres to the east of Christchurch in the South Island of New Zealand. The deposit contains sufficient rock phosphate to supply New Zealand’s phosphate fertilizer needs for at least 20 years. It was first investigated commercially 50 years ago by Global Marine, followed by JBL Minerals in the early 1970’s. NZ and German government research and industry groups then took it up again, with major field programs in 1978 and in the early 1980s.Due to difficult global and local economic conditions the project ground to a halt in 2004.The project was resurrected in 2007 when Chatham Rock Phosphate applied for a prospecting licence. This was granted in 2010 and a successful subsequent mining permit approval followed in 2013. The initial application for the separately required environmental permit was declined in February 2015.A lot has changed then and the significance of this will be the subject of the presentation. Chatham Rock Phosphate is confident that an environmental permit will be successfully granted next time."

Jan 1, 2017

By William C. Hirt

Column flotation is a promising technique for processing as-mined, cobalt-rich, ferromanganese crust to separate the valuable crust component from barren substrate-rock, either aboard ship or within the water column. Column flotation testing was carried out in a seawater medium using samples obtained from the U.S. Exclusive Economic Zone (EEZ) in the mid-Pacific Ocean near Johnston Atoll. The collector reagent was a mixture of diesel fuel, fatty acid, and sulfonate previously developed at the U.S. Bureau of Mines for crust flotation using conventional flotation cells. Results are dependent upon particle size and reagent dosage, especially *as these factors affect froth volume and stability. Column flotation results are compared with previous studies in conventional cells. An overview of how column flotation might be applied in an offshore mining and processing system is given.

Jan 1, 1992

By Derek V. Ellis

A stepwise implementation of seven criteria for screening the physical, chemical and environmental suitability of submarine tailing disposal (STD) at coastal mines is presented. It is expected that similar criteria would be relevant to future deepwater mining. A reconnaissance level study of four preliminary criteria: mine location; coastal bathymetry; feasible outfall locations; and potential for chemical contamination can support or eliminate the prospects for STD. If supportive, detailed, and far more time-consuming hence costly surveys of: environmental background information including oceanography and waste discharge characteristics; projected impacts on other resource uses plus regulatory and community concerns will be essential for environmental protection and to secure the necessary approvals. This review of STD systems on which the proposed screening criteria were based was undertaken by a Cooperative Agreement of the U.S. Bureau of Mines, Alaska Field Operations Center with the University of British Columbia.

Jan 1, 1994

By R. Moss

Gold and silver are important byproducts of mining volcanogenic massive sulfide (VMS) deposits. Both metals occur in VMS deposits ranging in age from the Archean to the currently forming massive sulfides found on the ocean floor. The gold- and silver-rich deposits on the modern seafloor are geographically diverse and occur in several different tectonic settings (Figure 1a,b) including seamounts (e.g. Franklin Seamount, Papua New Guinea), unsedimented mid ocean ridges (e.g. TAG and Snakepit, Mid Atlantic Ridge), sedimented mid ocean ridges (e.g. Escanaba Trough) and back-arc basins (e.g. Manus Basin, Papua New Guinea). Interestingly, the most gold- and silver-rich deposits are found in the back-arc basins of the western Pacific, commonly associated with differentiated volcanic rocks such as the dacite-rhyodacite suite at PACMANUS in the eastern Manus Basin. This suggests that different, or more efficient, mechanisms are concentrating precious metals in such back-arc settings. Such mechanisms may include leaching of volcanics enriched in gold (e.g. rifted arc crust) or silver (e.g. continental crust) and/or the introduction of gold into a hydrothermal system by a magmatic fluid. The gold content of modern seafloor precipitates varies from a few ppb up to a high of 54 ppm reported from eastern Manus Basin (1). The Jade Deposit in the Okinawa Trough has the highest silver contents with values up to 1.1% (2). Both gold and silver are preferentially concentrated in late-stage, low temperature precipitates with zinc-rich assemblages being favoured in most cases. Gold is found as relatively pure native gold and sub-microscopic inclusions in gold-rich deposits, but occurs predominantly as sub-microscopic inclusions and possibly as solid solution in the gold-poor deposits (3). Silver occurs as rare silver minerals such as acanthite and native silver in the silver rich Jade deposit (2), but more commonly in the silver-containing minerals tetrahedrite and tennantite, as is the case in the PACMANUS deposit. Tetrahedrite is also known to be an important host of silver in ancient VMS deposits (4). More abundant sulfides can contribute significantly to the silver balance. In the silver-poor deposits at 21 N East Pacific Rise, silver is contained entirely within chalcopyrite, isocubanite, pyrite, marcasite, sphalerite/wurtzite and galena. In this case silver may be present as sub-microscopic inclusions of silver minerals or in solid solution.

Jan 1, 2011

By Colin Devey

As marine research scientists we especially appreciate the uniqueness and complexity of the deep-sea hydrothermal vent fauna and environments, and are particularly interested in preserving vents for their scientific, aesthetic, ecological, and potential economic values. In fact, because of the specialized nature of the equipment required to work at deep-sea hydrothermal vents, such as occupied and unoccupied research submersibles, scientists are the primary group of people who have the opportunity to visit these extraordinary environments. The potential for significant impact of scientific activities on a single vent site or a population of vent animals pales in comparison to the potential for disturbance by volcanic/tectonic events or industrial mining/harvesting activities. Nonetheless, we recognize that some scientific activities could adversely affect individual sites or impact communities more than is necessary, if research activities are not carefully planned and executed. In addition, because only a limited number of sites are currently known and scientists from a wide variety of disciplines frequently work at single locations, we recognize the potential for use conflicts among scientists, at sites where scientific activity is intense.

Aug 24, 2006

By Tae-kyeong Yeu

KIOST has developed the pilot mining robot, named MineRo ?? from early-2011 to mid- 2012. The robot consists of two unit-modules having an identical mechanical structure and hydraulic system. One unit-module has two track systems, two pick-up devices, two crushers, one lifting pump and one thruster. The pick-up device is fitted on the frame of the track device. All actuators are driven hydraulically, which are manipulated by valves and the controllers. Each unit-module is equipped with one dual HPU of 250kW / 4,000V. PWM-16 (INNOVA AS) as hydraulic valve controller is adopted, which outputs PWM signals of 16 channels and can be used under pressure in oil-filled box. To measure angular velocity or displacement of hydraulic actuator, turbine-type flow-meters are adopted. The flow-meter has RF (Radio Frequency) type pulse detector, which extends the flow range by eliminating drag on the rotor. Two track motors, two crusher motors, lifting pump, one thruster can be controlled their velocities through feedback of the measured flow-rates. As well as the flow-rates, the states of the hydraulic system such as hydraulic pressures, temperatures, leakages are measured through a self-developed flow-pressure canister. In that canister, multi-channel amplifier boards are installed, through which the vast amount of data is acquired and transmitted to the main controller using serial communication.

Sep 14, 2011

By Ian B. Clark

In October-November 1993, the Centre for Cold Ocean Resources Engineering, Memorial University of Newfoundland and University of Victoria jointly carried out reconnaissance surveys at Pine Cove, Baie Verte, Newfoundland. Pine Cove is the site of a multi-year study examining the environmental impact of a shallow water small-scale marine placer gold mining operation. The reconnaissance survey data collected will be used to develop a multi-year environmental effects monitoring (EEM) program for Pine Cove, Baie Verte, but more generally an EEM protocol for shallow water small-scale marine placer mining, which meets the requirements of Canadian government regula¬tors such as Environment Canada and the Department of Fisheries and Oceans. The Pine Cove mining operation is currently scheduled for the summer of 1995, and will use two mining methods: a hydraulic suction dredge in shallow water (<10 meters) operated by a scuba diver, and a hydraulically actuated clamshell dredge in deeper water (-30 m). A centrifugal concentrator will be used to extract the heavy minerals from the mined marine sediments, and the tailings will be returned to the sea floor via a suspended discharge pipe. The reconnaissance work at Pine Cove included geophysical, geochemical, oceanographic and biologi¬cal surveys, providing data which will enable prediction of the potential environmental impacts of the proposed mining operation. The geophysical surveys showed the sea floor to be covered by varying

Jan 1, 1994

By Lorena Blanco, Guillermo Gómez-Ramos, Iker Blasco, Egidio Marino, Luis Somoza, Ricardo León, Teresa Medialdea, Javier González

"This study presents the first catalogue of marine mineral deposits and energy resources along the continental margin of Spain. Aggregates, oil and gas and metalliferous mineral areas have been defined and mapped. The catalogue, implemented in a geographic information system (GIS), is conceived as a first national database within the European network, which is being built as part of the EMODnet-Geology project. It comprises 8 types of mineral and energy resources for the Spanish margins: aggregates, hydrocarbons, evaporites, placer deposits, phosphorites, polymetallic sulfides, polymetallic nodules and cobalt-rich ferromanganese crusts (Figures 1 and 2). The catalogue stores a total of 409 marine mineral deposits and compiles information such as name, deposit type, main morphology, main minerals, setting or area extent for each mineral deposit. By number of deposits compiled, the aggregates are the most abundant (286) followed by hydrocarbons (62), cobalt-rich ferromanganese crusts (32), evaporites (9), placer deposits (8), phosphorites (5), polymetallic nodules (4) and polymetallic sulphide deposits (3). Considering the total extension, hydrocarbons (32,386 km2) and cobalt-rich ferromanganese crusts (24,951 km2) represent the biggest areas.The Geological Survey of Spain (IGME) is developing a new tool in the catalogue, according the International Seabed Authority (ISA) Database parameters, for individual samples on each ferromanganese deposit. The database includes an extensive collection of records that comprise five information groups: general cruise and sample data, physical properties, mineralogy, geochemistry and acronyms used. New attributes have been incorporated, in example: geophysical, sedimentological and petrological data in the deposit area, sample weight, porosity, morphology, textural and structural features, geochemistry of major, minor and trace elements (included REEs and PGEs) and supplementary cruise and laboratory reports. This new database complements the EMODnet-Geology project minerals catalogue, offering a deeper level of information for the areas with major potential for mineral or energy resources as they are the Canary Island Seamount Province, the West Margin of Galicia and the Gulf of Cadiz."

Jan 1, 2017