Search Documents

Oren F. Bridwell: We will close out the Institute. The President could not be here. So the Past President of the organization has been asked to take the chair. If there is no objection I will be glad to do so. We will proceed with the meeting. It seems to me we have a quorum. Minutes of last year's meetings are published in the Proceedings. If there is no objection we will dispense with the reading of the minutes. There being none we will dispense with the minutes. The Nominating Committee made its re- port last night. (See list of officers in front of Proceeding.) I move the nominations be closed. Mr. Bridwell: You have heard the motion and second. All in favor say "Aye." (Unanimous.) Motion carried. We will have a report of the Auditing Committee. Mr. Von Storch read the financial statement.

Jan 1, 1966

The Morning Session of the Forty-Eighth Meeting of the Rocky Mountain Coal Mining Institute convened in the Little Theater of the Broadmoor Hotel, Colorado Springs, Colorado, at 10:00.a. m.; June 2, 1952, Howard B. Crandell, President, presiding. PRESIDENT CRANDELL: Gentlemen, the meeting will come to order. I presume most: of you have heard the decision of the Supreme Court in the steel case. The decision was six to three that the President had no legal authority to seize the steel industry, and it is reported that the strike is already under way. Gentlemen, it is both a pleasure and an honor to talk to you who come to the meeting of the Coal Mining Institute, many of you, from long distances. Our program committee has suggested that the president give a 30-minute talk, but you may be at case because I assure you I won't take anywhere near that long, when we will pass to more instructive and enlightening subjects. Another reason for the short talk that I am going to make is that many men in this audience know more about coal mining, specialized subjects, than I do.

Jan 1, 1952

By Warren C. Bracewell

At your request, am submitting to you several suggestions for the amendment of our safety code which you felt should be kept up to date. These suggestions are the individual opinions of the several members of the Committee who have expressed (heir wishes to me in the form of letters. I am particularly indebted to Mr. Daniel Harrington, Mr. Wm. Littlejohn, Mr. Warren Bracewell, Mr. James Dalrymple and Mr. Hugh McLeod. Would recommend the following amendments Section 1. Wherever practical trolley wires should be securely hung to roof or timbers at a distance of not less than five feet and not more than six and one-half feet above rail and six inches to one side. Spacing of hangers should be from 20 to 25 feet apart. (Adopted.) Section 2. 500 volts D. C. should not be allowed in any installations. Trolley wires should not carry a voltage of more than 250 D. C. nominal voltage. (Referred back.) Pumps, mining machines and other small machinery units where A. C. power is used should not carry a voltage of more than 220. Large units, such as pumps, motor generator sets and hoists, may use a volt- age of 2,200. When power cables to operate same are of armored construction, cables should be securely buried at all crossings, on haulage-ways or where men travel. (Adopted.) Section. 4. Where power lines pass through door frames or stop- pings they should be properly insulated with porcelain compound or rubber tubing. Wherever men get on or off man-trips in vicinity of trolley wires same should be secure1y guarded and should also be protected with a cut- out switch, same to be pulled before men are allowed to get on or off trips. (Adopted.)

Jan 1, 1926

By Christopher Blazek

Presentation Overview ?2005 Train Derailments ?BNSF Investigation and Remediation ?BNSF Test Program ?Test Results ?BNSF Dust Control Goals ?National Coal Transportation Study ?Comparison of Different Topper Agents ?What Constitutes a Topper Program

Jan 1, 2008

PETER A. NIELSEN RMCMI PRESIDENT 1991-1992 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 88th Regular Meeting and Convention to be held June 28-30, 1992 Tamarron, Durango, Colorado

Jan 1, 1991

The Morning Session of the Forty-Eighth Meeting of the Rocky Mountain Coal Mining Institute convened in the Little Theater of the Broadmoor Hotel, Colorado Springs, Colorado, at 9:30 a.m., June 4, 1952, Albert M. Keenan, Chairman, presiding. CHAIRMAN KEENAN: Ladies and Gentlemen, here we have our third and final clay of our program, and I wish to take this opportunity to thank all of you for your attendance, both in the past meetings and this one this morning... I am particularly delighted to see that we are all here this morning after the very enjoyable banquet last night. It is a little difficult to get people gathered up after such an occasion.

Jan 1, 1952

By Jason Laumb

Regional Energy Production ?Energy is a globally traded commodity and is influenced by regional and national needs as well as international trends. We can greatly expand energy export from the region. ?Significant opportunities exist for increased coal-based energy production.

Jan 1, 2006

The 63rd Regular Meeting of the Rocky Mountain Coal Mining Institute convened at the Stanley Hotel, Estes Park, Colorado, and was in session at 10:00 a.m. The first session was called to order by Past President George A. Nugent, Vice President and General Manager, Big Horn Coal Company, Sheridan, Wyoming. He thanked and offered his congratulations to the Program Committee for a very wonderful job, namely, John Reeves, Chairman, E. G. Fox, Lee Jensen, O. F. Lewis, J. Peperakis, R. M. von Storch, J. E. Ward and R. R. Williams, Jr. He thanked the suppliers for a fine cocktail party the evening before. Mr. Nugent's Opening Address and introduction of President James Westfield, Assistant Director, U.S. Bureau of Mines, Washington, D.C., follows: It is a real privilege to call this 63rd Regular Meeting of The Rocky Mountain Coal Mining Institute to order and to say welcome.

Jan 1, 1967

[Adams, Dell H Consolidation Coal Co., 3300 One Oliver Plaza, Pittsburgh, Pa. Adams, Douglas K General Electric Co., P.O. Box 2331, Denver 1, Colo. Adams, Kenneth L Peabody Coal Co., 33 Carnation Dr., Belleville, Ill. Ahlborg, William Joy Mfg. Co., 580 Denver Club, Bldg., Denver, Colorado Albrechtsen, Ray H Mt. States Resources Corp., 2330 S. Main, Salt Lake City, Utah Allen, Dr. Harry C U. S. Bureau of Mines, Washington, D. C. 20242 Amerman, Richard W Utah Cons. & Mining Co., Box 155, Fruitland, New Mexico Anderson, G. A Walker Bank & Trust Co., 848 N 3rd E, Price, Utah Anderson, John S. Utah Cons. & Mining Co., 550 California St., San Francisco, Calif. Anderson, Robert Mine Safety Appliances Co., 1881 West N. Temple, Salt Lake City, Utah]

Jan 1, 1971

Jan 1, 1968

By Lyman Fearn

Men and institutions are what they are largely because of inheritance. Out of the past comes experience that enables men to build more wisely than did preceding generations. The field of possibilities has widened as the horizon of men's vision has been extended. The realization of these possibilities has depended largely on the application of men's natural endowments, brain and brawn, to the problems at hand. In the field of mechanized mining, Wyoming has a greater percentage of men with vision, who have a realization of the possibilities of mechanized mining, than any other state in proportion to tonnage production. With the introduction of mechanized mining systems have come problems that have caused the men who are connected with the safety work much thought. Discussions on mechanical drilling, cutting, loading, conveying, haulage, etc., have come in for their share of the debate. There have been a few attempts made to show that mechanical mining is safer than are the more primitive ways of doing underground work by man power. We also have a number of places in the coal producing States of the United States, where the mechanized systems have been abandoned chiefly on account of the safety element involved bringing about condemnation of the system by State inspection forces. Certain types of scraper systems have been condemned, and some have voiced opposition to long faces. This would lead us to believe that the question is still a debatable one as far as the safety element is concerned. It is only fair that we discuss the operations of mechanical systems and from the results obtained take analysis of conditions as they exist, basing our conclusions from the results obtained.

Jan 1, 1928

Cautionary Note about Forward-Looking Statements Certain statements made by us in this presentation that are not historical facts or that relate to our future plans, expectations, events or performance are forward-looking statements within the meaning of the federal securities laws. Our actual results may differ materially from those expressed in any forward-looking statements made by us. Forward-looking statements involve a number of risks and uncertainties including, but not limited to, the risks described under the heading ?Risk Factors? in the Prospectus Supplement. All forward-looking statements are qualified by these risks and uncertainties. We undertake no obligation to update the information contained in any forward-looking statements unless required by law. All statements made by us in this presentation are further qualified in all respects by the information disclosed in the Prospectus.

Jan 1, 2007

Our presiding officer for this session is someone we are all proud to be associated with. One who is dedicated to Public Service and Safety in the State of Colorado, and known in the mining field and the Colorado Mining Association. We are very pleased to introduce Mr. Donald Haske, Chief Mine Inspector for the State of Colorado: Donald Haske: Officers, Members and guests. It is certainly my pleasure to be here today and an extra special pleasure to be presiding over this session. As some of you know, from natural up, heavy equipment is rapidly coming to the field of mining. This may seem a long way off at the present, but it certainly isn't. We are getting all the old annuals (Bi) together to be compiled for a guide and public attraction. However, we are unable to locate an (1894 panel). If any of you know of any of these please let us know.

Jan 1, 1967

By Wm. Monay

MR. MONAY (Vice President Kinney Coal Co., Scofield, Utah): The past year and a half has witnessed a series of coal mine disasters in Utah and Wyoming, concentrated into the short space of a few months, following a long period of years in which the industry was comparatively free from devastating calamities. The natural result has been a hysterical activity on the part of bureaus, commissions and professional reformers who know little about coal mining from a practical standpoint. This activity has been met by the industry in Utah with an attitude of submission, no doubt the result of the fear of being misunderstood by the public. But it is my firm conviction that the lives and property of the coal industry will find their surest guaranty of protection in the humanity, and in the self interest of those operating and working in the mines, rather than in governmental regulation. Inelastic, inflexible blanket statutes and rules will simply stifle and hamper the initiative and progress of our industry in working out its own salvation, under the varying and changing conditions of different localities, different conditions, and in different mines. We who have spent our lives in digging in the mines and operating them, know more about this business than anyone else and I believe it is time for us to speak up and no longer sit meekly by while inexperienced bureaus and unskilled commissions make up laws, rules and regulations for us which when made are on the books to stay, even though in a short time they may prove inapplicable, in whole or in part, or be superseded by something different, and which in some cases create new dangers or lull us into a false sense of security. Shortly after the Castle Gate explosion in March, 1924, a new set of safety rules was issued by the Indus- trial Commission of the State of Utah to become effective July 1st of the same year, the most important of which prohibits the use of black powder in any mine--gaseous or non-gaseous; prohibits the use of open flame lamps in any mine-gaseous or non-gaseous; and requires that rock dusting in all main haulage ways as far as the freezing point and required that all mining machines be equipped with water to be applied while cutting. These rules have been characterized as "Utah's Monument to her Dead Miners" in a large poster spread broadcast over the country from an office in New York that styles itself the Association for Labor Legislation. In reviewing the coal mining history of the State of Utah, in the year 1900, a serious disaster occurred at Winter Quarters. The cause of the same is believed to be an explosion of powder that was stored in the mine, which was a common practice in the early days, and from that time until the Castle Gate disaster, March 8, 1924, a period of some twenty-four years, no explosion of any kind occurred in this district. During all this period open lamps were used, considerable black powder was used, rock dusting was unheard of, sprinkling with water was very generally done-all without any catastrophe. Since the adoption of the new rules, we have 'had a very violent explosion at the Carbon Fuel mine in Spring Canyon. At the time of this explosion, 3,000 feet of the main slope had been rock dusted several times between July 1st and September 21st. The second left entry, which is a main haulage way, a distance of 3,000 feet was completely rock dusted on the date of the explosion. This mine is not considered extremely gaseous, yet an explosion as violent as that of the Castle Gate mine occurred. Some thirty men who had been loading coal in various parts of the mine on this Sun- day, the day of the explosion, and other men employed in rock dusting the second left entry, had just left the mine a little while before it occurred, and no abnormal condition in the mine was noted. At the time of the explosion five machine men were in the mine.

Jan 1, 1925

[Arsulich, Thomas Mechanical Engineer, S.A.E. House, Laramie, Wyoming Barrett, A. Lee joy Mfg., Co., Research Engineer, Franklin, Pa. Bartlett, Rulon Salesman, 265 S. Seventh East, Salt Lake City, Utah Beauchamp, Paul N Goodman Mfg. Co., Sales Engineer, 2509 S. Monroe, Denver, Colorado Boyle, J. J Mine Superintendent, Roundup, Montana ?Burnell, Patrick H Gebo, Wyoming]

Jan 1, 1950

Jan 1, 1926

The Thirty-third Regular Meeting of the Rocky Mountain Coal Mining Institute was called to order at 11: 10 o'clock A.M., Monday, March l8th, 1935, President H. H. Bubb presiding. On motion of Gilbert Davis, duly seconded, it was voted that the reading of the minutes be dispensed with, inasmuch as they are printed in the proceedings. Owing to the absence of Mr. H. C. Marchant, who was unavoidably detained in Washington, Mr. F. W. Whiteside, Secretary Pro Tem, made the annual reports of the Secretary-Treasurer, which, on motion duly made and seconded, were received."

Jan 1, 1935

By F. A. Young

A description of the dry process coal cleaning plant which has been built and operated by St. Louis, Rocky Mountain & Pacific Company at their mine at Brilliant, New Mexico, should at first be a description of the special machinery which is used in this process. This equipment consists primarily of screens for sizing the coal into six different sizes all smaller than 1 ½ inch and the pneumatic machines for cleaning each size. These machines are patented and were manufactured by Sutton, Steele & Steele of Dallas, Texas, until a few months ago when all rights of sale were acquired by the American Coal Cleaning Corporation. These screens, a plan of which is now before you, are called anti-gravity screens because the coal travels up hill. The screens which we have at Brilliant are 3 feet wide and 7 feet 4 inches long. They consist of one upper deck which slopes upward in the direction of the flow of the coal, at an angle of 12 degrees. This deck is a wire mesh screen the size of which determines the size of oversize from that screen. Under this is a lower deck with a slope of 7 degrees. This is a solid bottom and is for advancing the undersize to the next screen. On account of the difference in pitch of these decks they are about 11 inches apart at the discharge end, which allows the oversize to be taken off at one or both sides and the undersize to fall only a few inches on to the following screen. This is perhaps the most valuable point in this patent as it allows any number of screens to be placed on a-level floor, tandem in a battery without elevating or rehandling the coal in any way. The length of the screens corresponds to the proper spacing of the cleaning tables which naturally operate on the floor below. I know of no other screen which can be operated in this way. The coal is caused to travel by a reciprocating motion. A shaft as shown near the center of the screen box and under it has an eccentric at each side of the screen with connecting rods attached near the rear of the screen box. The screen box is attached to the stationary under frame by means of cast iron plates extending full width across the screen box. These are placed at an angle as shown so that the forward motion of the eccentrics causes the screen box to rise as it moves forward and the backward motion drops the screen from under the coal thereby causing it to advance. The coal advancing over the screen cloth in this rolling or jumping motion causes very perfect sizing. It should be stated here that very accurate sizing is necessary for the success of the cleaning tables. The stroke is 1 inch and the speed 350 revolutions per minute. In describing the pneumatic cleaning table, I place before you a plan furnished by the makers. The basic principle is that if a film of coal one to two inches thick and all of nearly the same size pieces is placed on a flat perforated surface and a large volume of air passed through it, the lighter particles which are the clean coal will soon find their way to the top of the film, while the heavier particles, or waste, will remain on the bottom. The machine is built with a perforated deck about 4 feet square under which is an air chamber and air duct connecting with a fan which is part of the machine. The deck of the table has a reciprocating motion the same as the screens already described, which tends to advance the product up a slight slope which is adjustable. The coal is fed at one corner of the table as shown and the deck slopes also away from the feed and at right angles to the reciprocating motion. On top of the perforated deck are riffles about 2 inches apart and running parallel to the line of reciprocating motion. These riffles are about 1/2 inch high at the fan and feed side of the table and taper to nothing at the far side. When the coal is fed on to the table, the air through the perforations tends to raise it 'and roll it over these riffles down the slope toward the clean coal discharge. The heavier particles do not get over the riffles so rapidly and the reciprocating motion is constantly pushing them

Jan 1, 1923

The nineteenth regular meeting of the Rocky Mountain Coal Mining Institute at Rock Springs, Wyoming, was called to order in conjunction with the Wyoming State Safety and First Aid Meet, at 2 p. m., Thursday, August 7, 1924, by President William Littlejohn of Castlegate, Utah. Meeting opened by invocation by Father Welsh. Address of Welcome by Mayor P. C. Bunning and key to city presented to President Littlejohn. Response to address, of welcome made by President Littlejohn. Minutes of the last regular meeting read and approved. Report of officers: Financial statement by Secretary-Treasurer Shubart, who stated that there was $1,225.68 in the treasury and requested that the report be referred to an auditing committee for examination and approval. Motion by Mr. Pryde that the report be referred to an auditing committee. Seconded by Mr. Robinson. Carried. A committee of three, consisting of Messrs. Murphy, McKeehan and Gibson, were appointed by President Littlejohn to examine the report, and approve it. As no time was found during the meeting, the Committee was instructed to report later by mail. Report of Standing Committees: Mr. Pryde stated that the report of the Safety Committee would he presented at the morning session, August 8th. Report of Special Committees: None. Unfinished business: President Littlejohn stated that some action should he taken on the interchanging of certificates in the four states of New Mexico, Colorado, Utah and Wyoming. A committee should probably be appointed from each of the states, and the matter left in their hands to try if possible to get their legislators to put some law into effect which will make the certificates in all these four states interchangeable. President Littlejohn also stated that the subject had been brought up, through correspondence, of changing the emblem of the Rocky Mountain Coal Mining Institute, which is the old oil lamp, and that he had had a letter from Mr. C. M. Schloss, who stated that inasmuch as the old oil pit lamp was symbolic of mining it should be retained so that unless someone had any

Jan 1, 1924

By J. F. McDermott

The problem of converting our raw coal, and especially those coals that are not suited for long storage, in other words soft, into a fuel which would be at once clean; of a high B. t, u. content and low ash, is one that has occupied the minds of many able chemical engineers and hydrocarbon technologists during the past few years. Low temperature carbonization is the present outcome of this line of research, and many methods have been evolved of recent years to turn out a serviceable, useful fuel, and at the same time, save the by-products. As most of the research and data within my experience and knowledge pertains to lignite or sub-bituminous coals, I will confine my remarks to coals of that character and grade: I might say that Colorado coals, commonly called lignite, are not in reality true lignite, but are sub-bituminous, although I have in my possession an analysis of a Colorado coal which shows a moisture of 17 per cent, volatile 31.5 per cent, fixed carbon 28.8 per cent, and an ash of 22.7 per cent, and B. t. u. less than 8,000. Even this, though useless for domestic or indeed industrial purposes, could not be classified as true lignite. However, for the purposes of this paper I will refer to these coals as lignite. Two thousand pounds, or one ton, of raw lignite carries about 20 per cent moisture. This, of course, varies in some coals, but is, I believe, a fair average. For carbonization purposes this is usually dried to a 5 per cent moisture, therefore leaving but 1,700 pounds of coal to be placed in the retort. From present knowledge, and with the average process of carbonization, 70 per cent of this coal will come out carbonized, or 1,190 pounds, to which is added about 10 per cent pitch, which is fried out as the coal passes through the retort, and which is used as a binder, making a total of 1,360 pounds of coke or carbonized coal. This is usually in appearance a dark colored, rather porous coke of about the size of pea coal. It burns without smoke and have a very high B. t. u. content. According to most authorities on this subject, carbon, hydrogen, oxygen, nitrogen, sulphur and ash constitute the only elements on which carbonization value of a coal depends, and of these hydrogen is the most important. It is claimed the value of a coal for carbonization purposes may be roughly surmised from the hydrogen content. If this is promising, that is, showing an available hydrogen content of from 3 to 5 per cent, the coal should be given a careful ultimate analysis. Should the seam, as often happens in lignite coals, show varying bands of coal of different structure or appearance, samples should be taken from each band as well as a gross sample taken down the face of the seam in the usual way. This is in order to determine what part of the seam is most promising for by-product processes. A seam showing a high nitrogen content adds to the attractiveness of the coal in carbonizing as; if available nitrogen is 2 per cent or better, it should give a very high ammonia yield.

Jan 1, 1923