Search Documents

By M Harris, C Goodall, B Knopjes

The objective of this work was to investigate the effect of milling and flotation circuit configuration on flotation performance of platinum-bearing ore from the UG2 reef of the Bushveld Igneous Complex in South Africa. Pilot plant trials were conducted at Lonmin Platinum using a highly automated pilot plant (a floatability characterisation test rig or FCTR), with a pilot ball mill, a stirred media detritor and an ISA mill. Different milling and flotation configurations were tested, without changing the overall grind size distribution or flotation residence time from one circuit to the next. Results from the pilot plant tests indicate that staged grinding, with intermediate flotation stages, can achieve significant performance benefits in comparison to a single grind-float circuit, for an equivalent overall grind and flotation residence time. These findings are explored qualitatively, in terms of the recovery and transportation of fast, slow and non-floating platinum-bearing particles through the various milling and flotation stages, and an optimum strategy for the separation of this type of ore is explored and discussed.

Jan 1, 2005

By Amos QG

The Paddington I and proposed Paddington II Pits are both located in what is, by Eastern Goldfields standards, a large tonnage-low grade orebody. The Pits have been designed to supply ore to a substantial Treatment Plant at the designed rate of 875,000 tpa. (This throughput is currently being increased to 1,200,000 tpa).Generally the orebody lends itself to large tonnage mining techniques, relying on only a relatively small amount of sampling. The surface enrichment zone and depleted zone are reasonably complex and require more intensive grade control and sampling techniques as typically utilised in many surface mines in the Eastern Goldfields, although as experience and understanding of the nature of the orebody was gained, less sampling became necessary.

Jan 1, 1986

Gunpowder Copper Limited processes 1,000 tonne/day of Mammoth ore in a conventional flot- ation concentrator. Run of mine ore is prepared for flotation by three stages of crushing and two stages of ball milling. The concentrate, in which the primary copper mineral is chalcocite, is solar dried and exported to Japan. The history of operation is summarised, and plant practice and metallurgical problems are discussed.

Jan 1, 1974

By Gadsden R. W

Physical and chemical requirements are defined for coke and ferrous materials used in modern high productivity blast furnaces operating in Australian conditions. Recent developments in the type of equipment required to be installed at the steelworks to ensure these requirements are described with illustrations from current plant practice provided.

Jan 1, 1976

The Mining Act (1992) and the Petroleum Act (1980) provide for the Government of Papua New Guinea (PNG) to take up equity holdings in mining and petroleum projects. The price the Government pays for its share is based on the historical cost of exploration and development on the project to the date of government equity acquisition. The equity level to be acquired is not fixed and ranges up to 30o for mining and up to 22.5s for petroleum at the discretion of the Government of the time.The objective of this paper is to examine the pros and cons of State equity holdings in PNG from the point of view of both the State and the developer. Using an economic model of the PNG mining taxation system an assessment is made of the effective return on investment received by the State from such equity holdings. The results are compared with government revenues from other taxation measures.

Jan 1, 1994

The Curragh mine has complex operating conditions. The mine operates in four seams to produce two coal qualities and is divided into five pits which have different qualities and coal preparation characteristics. The combination of all of the necessary controls to achieve maximum resource utilisation has necessitated the development of suitable software to assist the quality control engineering function. The required software had to be able to plan the optimum yield of coking coal whilst achieving the quality parameters for the coking coal and co-produced steam coal. The program has been designed to evaluate all of the mine faces available for coking coal production. The optimisation of coking coal production is planned and co-produced middlings steam coal determined. The optimum steam coal product is determined using the middlings in combination with bypass production.The computer software to carry out these functions has been designed by using an exploration data base as the raw data source. The program accesses this data and uses a coal preparation prediction program to determine the yield vs. ash relationship for each coal face. A linear program selects the optimum -combination based upon equal incremental ash values. The final output lists feed tonnages, coal preparation conditions, product tonnages and full coal quality data.

Jan 1, 1985

By Kennedy B. J

The 1100 Orebody is the main copper production area of Isa Mine with an output of 390 000 tonnes per four week period and a work force of approximately 260 men per shift. Currently a total of 56 nippers work a three shift, five day week roster to-service crews spread over a strike length of 1000 m and a vertical height of 220 in. A variety of rail and diesel equipment provides shaftto cribroom and cribroomto sublevel work place transport of men and materials. Overall eficiency and safety has been improved with a selected group performing supply, storage, clean-up and "bus runs" throughout the orebody - activities which are further co-ordinated by an FM radio system linking units with a control clerk.

Jan 1, 1977

Victorian brown coals occur in massive deposits, the quality of which is determined in the first instance by means of samples taken from exploratory bores. As a number of important utilisation characteristics are connected, not with the relatively homogeneous organic mass of the coal, but with minor components such as the ash content and particular constituents of the ash, it is necessary to know how bore samples relate to coal finally used in the process concerned. Tests are described in which the statistical parameters associated with bore sampling, operational sampling and sample reduction and laboratory procedures including a range of coal analytical methods were determined. These indicated properties where analytical errors were relatively high and where sample reduction procedures contributed substantially to imprecision in results. They also showed the effects of the non-homogeneity of brown coals with higher than normal ash contents. A further experiment explored the relationship between samples taken at various stages in the course of test boring, digging, and burning a defined 'block' of coal, and demonstrated an apparent increase in the proportions of adventitious mineral constituents as the 'intensity' of sampling Increased.

Jan 1, 1976

By Smith I, Gowan M

With the advent of increased environmental regulation and high penalties for non-compliance in many countries, there has grown a need for all industries to assess their risk with respect to environmental compliance and consequently develop management systems which ensure environmental compliance and sound environmental practice. The need to better assess and manage environmental risk has developed rapidly as legal and financial penalties have increased for inappropriate management of the environment. The mechanism that industry has developed to manage risk is through the use of environmental management systems. These environmental management systems are generally based on the principles of total quality management. For example the British Standard BS7750 (Specification for Environmental Management System) shares common management system principles with ISO 9000 quality management systems. The same trends of increased environmental regulation and higher penalties for environmental impairment are now evident in Australia where environmental management systems are now being introduced. With increased penalties for environmental impairment and greater responsibility of managers and directors, environmental management systems are likely to become even more common in Australia. This paper describes some of the influences directing environmental management within the Australian industrial and mining environment, describes the elements of an environmental management system and relates these to the mining industry.

Jan 1, 1994

The implementation of the Mining Further Amendment) Act, 1970, and later the Coal Mining Act, 1973, placed a requirement on the Department of Mines to accept an initiative in relation to coal exploration and coal mine development which does not apply in the case of other minerals. It is necessary to consider the exploration of the total coal resources of the State when considering exploration rather than one individual basin or deposit. If the level of knowledge of the coal resources in these basins is considered in relation to their potential for development it is possible to allocate broad scale priorities to their assessment. Due to the enormity of the task which involves a conservative estimate of in excess of 400 000 m of drilling to reach a broad reconnaissance level of understanding the involvement of industry with the Department in the exploration programme is necessary. The development of the coal deposits by mining operations must give consideration to a number of constraints apart from the simple availability of the resources. Principal among these are aspects

Jan 1, 1976

The Olympic Dam mineral discovery by Western Mining Corporation (WMC) in South Australia has been shown to contain one of the world's largest known deposits of copper and uranium; gold and silver are also present. Development of the deposit jointly by WMC and the BP Group is awaiting commitment, with planning based on initial production of gold in 1987 and copper and uranium in 1988.

Jan 1, 1985

By Williams DJ, Battino S

The rapid crushing technique for the measurement of gas content of coal consists of accelerating the rate of gas desorption from coal by crushing. This technique allows the determination of gas content in the space of hours rather than days or weeks as required for the traditional slow desorption technique. The crushing technique is used particularly when gas content determinations are urgently required for mine safety purposes. The method is now routinely used in underground coal mines of NSW and to a lesser extent in QLD. Despite the rapidity and efficiency of this method, concerns have been raised upon the reliability of the method to deliver accurate results. Experience in Australia has shown that there is in fact some discrepancy in results between gas laboratories using the rapid crush technique. The development of rapid crushing techniques for seam gas content measurements in Australia and the main causes of variability in the gas content test results were investigated. The gas laboratories participating in the gas content testing were CSIRO Division of Coal and Energy, BHP Technical Services and GeoGas Pty. Ltd.

Jan 1, 1998

A mineral exploration manager's prime function is to provide a frame- work within which new mine production can be achieved. As part of this framework, the manager should know his employerb future requirements, and should direct exploration towards those particular mineral commodities which indicate satisfactory growth in consumption and price. Selection of these commodities can be assisted by studies of world reserves, and long term trends in price and consumption. Exploration planning is most efficient with an assured and reasonably uniform supply of funds.

Jan 1, 1980

The type of population encountered in the sampling of coal, ores and other products of natural phenomena is one in which the variance within a cluster of elements generally increases steadily as the size of the cluster increases. To enable estimation of variances of stratified random or systematic sampling for such populations one must model the serial correlation function or alternatively, the variogram function. The author has postulated a specific symmetry of the serial correlation function which leads to expressions with rich theoretical and practical implications. These expressions provide a spatial correlation function which explains power law relationships often observed in studies of dispersion variances. They also enable straightforward calculations of sampling variances. The importance of the role of finite population size in the equations leads one to examine previously held concepts of ælargeÆ and æsmallÆ sample populations. The model based on the symmetry postulate is a fractal model with the serial correlation function of a hypothetically infinite population being of the same form as that developed by Mandelbrot for discrete fractional noise. Techniques used in fractal mathematics apply, including box counting and fitting of a dimension function. The paper establishes a framework for the understanding of this fractal theory and demonstrates how to calculate sampling variances from the model variogram using simulated data fitting the model.

Jan 1, 2008

Since 1865 when Congress moved to create a Federal Mining Bureau, successive legislations have given rise to the current '!Federal Coal Mine Health and Safety Act, 1969. Coal beds from 22 feet to 20 feet thick are mined under covers from 50 to 2800 feet with full and partial pillar recovery equally popular and accounting for a total of 54% of the mines. Pillar recovery and roof support practices vary, and each operator must submit an overall roof control plan (within specific guidelines) for approval before undertaking any development. The guidelines relate to dimensions of openings, details of support, sequence of extraction, limits of extraction and caving details. Experienced and professional staff of M.E.S.A. provide roof control plans and make inspections and grant-approvals of principles of support and minimum support in pillar extraction, with provision for modifications with time. Guidance is given with training programmes and standards of supervision. All of these aspects are approached in the spirit of the Congress declaration that the first priority and concern must be the health and safety of the miner.

Jan 1, 1974

By Armstrong RW, Middlin B

The development, design, construction and operation of the new Solvent Extraction/BCA process plant at Copper Refineries Pty. Ltd., Townsville is described.The process offers substantial savings in electrical power costs, improvements in plant hygiene, and a lowering of materials handling costs compared with conventional electrowinning technology.The solvent extraction process extracts arsenic from copper Tank House electrolyte using a tributyl phosphate (TBP) - kerosene solvent. The plant incorporates fourextraction stages, two scrub stages, and three stripping stages to produce an arsenic-bearing low-acid strip liquor. This strip liquor is mixed with copper sulphate, and neutralized with ammonia to form a copper (II) arsenic (V) crystalline product, bicupric arsenate (BCA). This product is then used in the manufacture of chromated copper arsenate timber preservatives (Royston 1982).

Jan 1, 1985

By E House, V Lisitsin

Recent whole-rock geochemical data from nearly 900 fresh drill core and underground samples taken from seven central Victorian gold deposits confirm the presence of distinct and identifiable primary alteration haloes surrounding the deposits. Ferroan carbonate alteration extends for up to several hundred metres away from turbidite-hosted gold mineralisation outside of contact metamorphic aureoles. A less distinct phyllic alteration zone can be identified using geochemical molar ratios or short wave infrared analysis. It generally overlaps a sulfidic halo characterised by disseminated pyrite and in close proximity to mineralised structures, arsenopyrite. The extent of the sulfidic halo can be traced using low-level analysis of pathfinder elements such as S, Au, As and Sb. Recognition of these alteration features enlarges the target for exploration and provides a tool by which drilling can be directed towards mineralised structures. An EXTENDED ABSTRACT is available for download. A full-length paper was not prepared for this presentation.

Jan 1, 2008

By Sturgul J. R

ZC Mines investigated a proposal to replace the present underground train haulage system with rear dump trucks. The number of rear dump trucks required to achieve target output and the required mix of trains and trucks during the changeover was of importance to the designers, and a GPSS computer simulation model of the operation was constructed using GPSS/PC, a recent form of the language for the personal computer. Three models were 'constructed to simulate initial and final configurations of underground haulage systems to transport ore from ore passes to the crusher and then to the skip for transport to the surface. The initial model simulated train operation on two levels and rear dump truck operation on a third level. The second model simulated rear dump truck operation on two levels with ore being loaded through the crusher to the skip as in the previous case. The third model replaced the rear dump trucks on the lower level with a train to establish the relative merits of the two methods of transport. The simulations identified equipment numbers, required operating hours and critical points in the operation which can then be addressed by the mine designers.

Jan 1, 1988

Sluice-boxes are by far the most widely used concentrating devices by small-scale operators in PNG who work alluvial gold deposits. The sluice-box designs and their operating conditions used are known to vary widely. The selection of sluice-box configuration and the operating parameters such as the water flow rate is purely based on past experience. Some use small flowrates to increase the fine gold recovery at the expense of efficient separations and capacity while others use high flow rates resulting in increased fine gold losses but with high throughput rates. Recent work has revealed that the combination of riffle height, their spacing and wash water flow rate are the most important parameters that determine the success or failure of such operations. This combination has been shown to depend on the in situ gold and gangue size distributions of the deposit being processed. This paper describes a design procedure which uses a non-linear optimisation method to determine the optimal combination of the above parameters to maximise the metallurgical efficiency of such operations.

Jan 1, 1993

By Hodkinson I, Slight M

Over the last five years Mt Leyshon has matured into a sizeable gold mine by Australian Standards. In the later part of 1990, after commissioning of the 3.5 mtpa CIP Plant upgrade, experience indicated there was potentially additional Mill capacity beyond that being utilised at the 3.5 mtpa rate. Overall throughput was limited by crushing plant performance and high operating costs resulting from the age and condition of the main crushing plant.In addition, mining was being carried out using a mining contractor who utilised relatively small, high cost mining equipment, and on-going exploration success was also indicating that the then current mine plan would result in only a portion of the available resource being exploited.

Jan 1, 1992