Search Documents

By Willam R. Normark

During a series of dives with the submersible ALVIN in 1984, samples of massive sulfide were recovered from four vent sites. All sites occur within a linear, steep-walled cleft about 50 m wide and as much as 30 m deep. The cleft bisects the axial valley floor throughout the 15-km-long study area and appears to have been the source for the most recent volcanic eruptions in the valley. Three of the vent sites are defined by a set of discrete hydrothermal discharge zones; as many as eight have been identified over a distance of 500-800 m along the cleft floor. Sulfide deposits occur as individual and coalesced mounds, spires, and chimneys generally less than 3 m in height but a few might be as high as 10 m. The vents are also marked by extensive, yellow-to-amber ferruginous sediment and clots of bacterial matter. Some vents have extensive colonies of tube worms, gastropods, mollusks, and several predator species, such as crabs and squid. The fourth vent site has no visible discharge and consists mainly of "dead" spires and chimneys of massive sulfide. The massive sulfide samples collected with ALVIN are primarily sphalerite with minor marcasite, pyrite, pyrrhotite, isocubanite, chalcopyrite, wurtzite, and anhydrite. Bulk analyses of these chimney and spire samples show Zn contents approaching 60% by weight and significant enrichments in Ag and Cu. Vent fluids have the highest concentrations yet reported for Zn, Fe, and Mn. Thus, the Zn- and Ag-rich nature of massive sulfide from the southern Juan de Fuca Ridge study area

Jan 1, 1985

By Andrew E. Grosz

The United States is dependent on foreign imports for about 80 percent of its ilmenite, about 60 percent of its rutile, and virtually all of its monazite. Nearshore marine sand deposits and beach-complex sediments in the southeastern United States are important domestic sources of ilmenite, leucoxene, rutile, zircon, monazite, and a number of other less well known economic heavy-mineral (HM) species. Because global onshore reserves of placer titanium minerals may fall short of demand in as few as 20 years, offshore research in HM placers will become more important. The Atlantic Continental Shelf (ACS) defined by the shoreline and the 200-m isobath varies in width for the modern U.S. coastline from a fraction of a kilometer to about 150 km offshore of Cape Cod, Mass., and includes an area of about 3.91 x 105 km2. It probably contains 3-7 x 1011 m3 of sand and gravel which may locally contain commercially exploitable placer HM deposits.

Jan 1, 1986

By Alexey Musatov, Georgy Cherkashov

Based on geochronological data it was confirmed that hydrothermal discharge has an episodic character: active and inactive periods of the seafloor massive sulfides (SMS) formation alternate (Cherkashov et al., 2017). There is an assumption of correlation of the periods of magmatic and hydrothermal activity with the stages of glaciation (Lund et al., 2016). During the cold periods, the level of the ocean was reduced from 70 to 150 m depending on the glaciation scale (Spratt, Lisiecki, 2016). As a result, the hydrospheric pressure on the upper mantle decreased and could provide increased magmatic and hydrothermal activity (Lund, Asimow, 2011). This assumption is confirmed by the correlation of warming and cooling stages with increasing of hydrothermal input to the bottom sediment near hydrothermal fields. According to data (Lund et al., 2014, 2016; Middleton et al., 2015) the peaks of hydrothermal activity, expressed in the layers of metalliferous sediments at the East Pacific Rise and the Mid-Atlantic Ridge, roughly correspond to the last two periods of cooling (20 and 60 ka). To test this hypothesis, we tried to compare the sequence of warm and cold periods in the Pleistocene with the dating of SMS reflecting the periods of hydrothermal activity. Results SMS samples were obtained from 12 sites within the Russian Exploration Area at the MAR segment 12-20°N. The results of dating 198 samples by the 230Th/U method demonstrated the absence of correlation between hydrothermal activity periods in different hydrothermal fields (Cherkashov et al., 2017). It was proposed that each field has its own evolutions scenario. Considering this point, only the oldest SMS dating for each field which fixed the beginning of hydrothermal activity was selected for comparison with the cold/warming periods.

Jan 1, 2018

By Andrea Koschinsky

Ferromanganese crusts have traditionally been considered a potential ore for Co, whereas ferromanganese nodules have typically been considered a potential ore for Ni and Cu. However, both nodules and crusts sequester high concentrations of many metals (Table 1) from sediment pore waters and seawater, many of which are essential for high-tech applications. The resource potential of these rare and valuable metals is poorly known and they are the subject of considerable current research. The need for adequate and dependable supplies of these metals is essential for the development of new technologies. The rare-earth elements have recently received much attention in the scientific and popular press because of their use in so many high-tech applications and because more than 95% of the production comes from China (e.g., Service 2010); consequently, there is concern about the possibility of a significant decrease or even curtailment in exports from China. The lack of a primary source and the inadequate supply of Te have prohibited the development of a Cd-Te photovoltaic solar-cell industry (Hein et al. 2010). Inadequate supplies of many of the elements listed in Table 1 are limiting the development of key high-tech industries, forcing the use of alternative metals that [ ] may result in less efficiency or less favorable properties for a product. The rare-earth elements, Te, and other elements listed in Table 1 occur in high abundances in marine hydrogenetic and diagenetic ferromanganese deposits. Here, we look at the mechanisms by which these rare and valuable metals are incorporated into different genetic types of marine ferromanganese deposits.

Jan 1, 2010

By Hyun Sub Kim

Subsea mineral deposit exploration aboard the R/V Onnuri was performed along the northern Central Indian Ridge (CIR) between 8°S and 17°S in December 2009 ~ January 2010 (09IR Leg01 and 09IR Leg02) and December 2010~ January 2011 (10IR Leg01, 10IR Leg02, and 10IR Leg03). Final goal of the expedition for the first Korean research cruise on mid ocean ridge system is to define seafloor massive sulfide ore bodies through searching the active hydrothermal vents nearby spreading centers as well as to elucidate the nature of spreading segments of the northern CIR area where no systematic survey have been operated before by mapping and sampling of volcanic rocks. The preliminary result of topographical interpretations of bathymetry clearly display ocean core complex between 10°S and 11°S. The ocean core complex is featured by topographic-high area with corrugated surface. Lineaments of corrugations of the ocean core complex are clearly perpendicular to abyssal hill direction which is triggered by symmetric-normal faults. Ocean core complex are favor for hydrothermal fluid path because of the long-lived faults. In further exploration, more detailed examination, including systematic CTD casting and tows, need to narrow down actual venting site around ocean core complex. Magnetic field survey is able to estimate the location of hydrothermal vents with the properties that high temperature of hydrothermal fluids over Curie-point can cause thermal demagnetization. In magnetization intensity map, most of low magnetization zones are located at the nodal point over the ridge axis and the ocean core complex.

Jan 1, 2011

By Igor E. Mikhaltsev

The goal of investigation of the midwaters and of the bottom of the world - ocean versus technological possibilities. Manned vehicles and maximum depth decision. The methods of solving of the problem. The science and technology alloy. Mutual venture of Academy of Sciences of the USSR and, Rauma-Repola Oy of Finland. MIR-1 and MIR-2 - as twins. No reasons of copy "Sea Cliff" and "Nautilus". Six landmarks of specificity of "MIR"-type submersibles. The manned spheres and three ballast spheres are made of maraging steel; the electric power resource (100 kwh) and maximum underwater speed (5 knots) is two times more than of the analogous vehicles while the batteries are of NiFe type; the MIR submersibles have the seawater ballast (and trim) system which means practically unlimited vertical manoeuvrability ; and the weight in air is equal to "Nautilus" - 18,6 tons (in case of equal energy resource the weight of MIR-1 or MIR-2 would be 17 tons). Some remarks on standard life support (248 man-hours) safety systems and specificity of launch & recovery system.

Jan 1, 1988

By Jan M. Peter

Many of the Pb-Zn massive sulfide deposits of the Bathurst area in northern New Brunswick, Canada, are intimately associated with laterally continuous iron formation (IF) (Figure 1). This IF is a fossil laminated, exhalative, chemical sediment. Together, the IF and the Brunswick #12, Brunswick #6, and Austin Brook deposits (rightmost discontinuous horizon on Figure 1) are collectively referred to as the "Brunswick Belt". To date we have only studied the Brunswick Belt and have not examined the horizon along which the QSR, CNE and Flat Landing Brook deposits lie. The Bathurst area is underlain by the Tetagouche Group (Figure 2), a Cambro(?)-Ordovician sequence of metasedimentary and bimodal metavolcanic rocks that was intruded by mafic to felsic plutons and subsequently deformed during the Taconic Orogeny. The stratigraphic sequence consists of shales and greywackes that are overlain by carbonaceous shales and felsic volcanic and volcaniclastic rocks; these are in turn overlain by mafic volcanic and sedimentary rocks. The massive sulfide deposits and IF occur within the upper portions of the felsic volcanic rocks in close association with carbnaceous metasedimentary footwall rocks (Figure 2).

Jan 1, 1993

By Anthony T. Jones

Deep seabed mining requires technology to collect materials and transport them to the surface. An international patent search was conducted to define the state of the art in seabed mining technology. Over 350 patents were identified from 12 patent systems. The majority was from the United States, Japan, and the former USSR. Patent activity in this field peaked in 1983 when 34 patents were issued. Since 1984, on average 6 patents have been issued annually. The technology represents ten major classifications. With the exception of Deepsea Ventures, Kawasaki and International Nickel, it appears that much of the technology developed and tested in the 1970s by consortia active in seabed mining was never patented. Over the past two decades, identifiable trends in marine technology could influence seabed mining application such as more sophisticated communication systems, advances in hydraulic manipulators, improved computational technology in navigation, modeling of vessel ? ocean interactions, and improved materials. The most significant recent activity has been in European applications, which disclose remotely controlled subsea vehicles for mining diamonds.

Jan 1, 2001

By C. Wildman

Prospectivity modeling of seafloor massive sulphide (SMS) deposits has been completed over the Kermadec Arc-Colville Ridge area using the GIS based weights of evidence and fuzzy logic modeling techniques. SMS deposits are the current equivalent of ancient onshore volcanogenic massive sulphide (VMS) ore deposits. These high-grade deposits are formed on the seafloor and commonly consist of a black smoker and metal rich sediment mound complex resulting from the discharge of hydrothermal fluids (up to 400°C) from fractures on the seafloor. Metal sulphides are continuously precipitated in response to mixing of high-temperature hydrothermal fluids with ambient seawater. Accumulation of metal sulphides has led to SMS deposits being potentially major sources of copper, zinc, lead and other metals such as gold, silver, which to date remain untapped. Modeling of SMS deposits was undertaken to illustrate the power of GIS modeling for seafloor resource evaluation and how it can be used to quickly identify and rank in terms of the most likely prospective areas of the seafloor where new SMS deposits might exist. The mineral deposit modeling was constrained by the mineral systems concept which defines those parts of a mineralisation system that are critical to the ore-forming process. The deposits are typically formed in extensional tectonic settings, including both submerged tectonic margins and sea-floor spreading. Volcanic vent systems and underlying dykes, stocks and sills are the sources of heat that are responsible for converting sea water drawn down through fractures in the oceanic crust into an ore-forming hydrothermal fluid. This fluid is then capable of leaching metals and elements from surrounding footwall rocks, which are then transported upwards via the convection of hydrothermal fluids. The ore materials are then precipitated within the black smoker field as massive sulphides due to the mixing of high-temperature (250-400°C), metal-rich hydrothermal fluids with cold (about 2°C) oxygen bearing seawater.

Jan 1, 2011

By Samantha Whisman, James R. Hein

Hydrothermal marine manganese-oxide deposits (HMMD) are cemented and variously replaced volcaniclastic and biogenic sediments that were mineralized by distal, low- temperature, hydrothermal fluids. HMMD predominantly form below the seabed as sediment-hosted statabound deposits but can also form on the seabed. These deposits form at oceanic and back-arc basin spreading centers, volcanic arcs, and mid-place hotspot volcanoes. HMMD have traditionally not been considered to have an economic potential because they were considered to be devoid of economically valuable critical elements. This contrasts with their non-hydrothermal counterparts, ferromanganese crusts and nodules, which are enriched in many critical elements. However, manganese is now one of the critical metals and HMMD have the highest manganese contents (up to 55% Mn, so- called battery-grade Mn) of all the types of deep-ocean mineral deposits. There is a growing demand for this critical metal and an upward trend exists in the price of manganese on the global market. Also, other critical elements can occur in high concentrations in some HMMD and their economic potential has not been considered, especially for lithium (up to 0.17%) and molybdenum (up to 0.24%), but also vanadium (to 820 ppm), chromium (to 346 ppm), and nickel (to 0.45%), among others. Which of these critical elements are enriched and their concentrations depend on the types of rocks leached at depth by the hydrothermal fluids, the composition of hydrothermal minerals precipitated in the higher temperature parts of the circulation system, and the types of sediments mineralized by the manganese oxides. For example, mineralization of a carbonate sediment resulted in the highest lithium contents, whereas leaching of ultramafic rocks at depth as a rule results in the highest chromium and nickel contents in the HMMD. These deposits are known to be widespread, especially in volcanic arcs, but their lateral and vertical extents and consequently size, tonnage, and grade have not been determined. Most samples of hydrothermal deposits have been collected by dredging and therefore the in situ relationships often are not known. One sample from the Mariana volcanic arc, west Pacific, was collected by ROV at 1274 m water depth from a layered outcrop 6.6 m thick that may be a sequence of pervasively mineralized volcaniclastic layers and offers the first clue as to the potential vertical extent that these deposits may attain. However, only the top ~0.4 m-thick layer was sampled, so it is not known whether the mineralization extents throughout the outcrop. Although large manganese deposits of various origins occur on the continents, they consist of manganese carbonates, silicates, or complex mixtures of manganese minerals. In contrast, marine hydrothermal HMMD exhibit relatively simple mineralogy that would make processing of this potential ore much simpler.

Jan 1, 2018

By Georgy A. Cherkashov

Two principal types of the hydrothermal fields in Atlantic - axial and off-axis - could be established based on their structural setting in the rift zone of the Mid-Atlantic Ridge (MAR) (Figure1). The first (axial) type is represented by five high- and three low-temperature hydrothermal sites (Table 1). All of these fields are connected with young axial effusive volcanism and related to large linear volcanic ridges or central volcanoes at the inner floor of the rift valley. The hydrothermal activity here is controlled by the intersection between longitudinal magma feeding faults and transverse weakened zones characterized by high permeability. [ ] The hydrothermal sites of the second (off-axis) type (such as Rainbow, TAG, 24°30?N, Logatchev, newly discovered 13°N (Figure 2) and possibly 16°48?N sites) are related to large tectonic dislocations forming marginal scarps of the rift valley as well as transverse discontinuities.

Jan 1, 2003

By Valery M. Yubko

During the last ten years seven applications for nodule-bearing areas of the World Ocean Floor International Region (IR) have been made by national companies of Russia (Yuzhmorgeologiya), France (IFREMER/AFERNOD), Japan (DORD), India (The State Department of Sea Resources Development), China (COMRA), Korea (KORDI) and the Interokeanmetal Joint Organization (IOM) of some East European countries and have been registered by the Preparatory Commission of the United Nations International Seabed Authority (ISA). Besides these groups registered within Resolution 11 of the Final Act of the III United Nations Conference on the Law of the Sea there are four international consortia registered in the USA [Kennecott (KCON), Ocean Mining Associates (DMA), Ocean Management Incorporated (OMI), and Ocean Minerals Company (OMCO)], which have interest in areas in the IR and can be considered as potential applicants. All registered areas (with the exception of the Indian Ocean) including the areas of potential applicants and also 6 areas, reserved for the ISA are located in the Clarion-Clipperton Zone of the Pacific Ocean. If within each area not less than one deposit of polymetallic nodule-bearing ores can be discovered, then, the total number of such deposits, for the present moment, is 20.

Jan 1, 1994

By J. R. Woolsey

Research grants of The Marine Minerals Technology Center (MMTC) are directed toward development of the technology 'for exploration, mining, and processing of non-fuel mineral resources within the U.S. Exclusive Economic Zone. FY 1989-90 research grants are as follows: - Seafloor Gamma Measurement Data Collection System. - Free-Fall Seafloor Hard Substrate Corer. - Microtopography of Manganese Crust Deposits. - Cobalt Crust Continuum on Seamounts, EEZ, Hawaii. - Economics of Marine Polymetallic Sulfide Resources. - Graphite Furnace Atomic Absorption Spectrometer. - Depositional Models for Aggregate and Heavy Mineral Exploration. - Sand Resources of Heald and Sabine Banks, Texas. - Sources, Geometries, and Compositions of Heavy Mineral Placers. - Geostatistical Methods for Marine Placer Exploration. - Computer Aided Design for Communication and Strength Umbilicals.

Jan 1, 1989

By Yannick Beaudoin

The source of base metals in modern seafloor hydrothermal systems can be attributed to leaching of host rocks by hydrothermal fluids and/or potentially by direct degassing of magma. From an economic perspective, metal grade is the most important consideration for seafloor deposits. Tectonic setting appears to be a key factor influencing the development of high grade seafloor base metal sulfide deposits. Back-arcs have a clear advantage over other settings in producing large and rich polymetallic sulfide ores. Microinclusions of magma or so-called melt inclusions trapped in phenocrysts of lavas have contributed to our understanding of the ore-forming process. n this study, we present data from 103 melt inclusions mainly in plagioclase crystals hosted in basaltic to rhyolitic lavas from 9 modern seafloor tectonic settings: oceanic back-arcs (Manus Basin including an ODP Leg 193 drill hole, Bransfield Straits), continental back-arc (Okinawa Trough), mid-ocean ridges (Explorer, MAR), seamounts (Foundation, Axial, Pito), and a transform (Garrett). Most sites host active hydrothermal systems that are producing polymetallic sulfides.

Jan 1, 2005

By B. Prause

Ferromanganese crust samples collected from Central Pacific sea-mount areas became of special interest after surprisingly high nobel metal contents have been analyzed. Hydrogenetic crust growth is controlled by the conditions of the oceanic water column. Thicker encrustations show two crust generations of different age ranges. The mean values of the chemical composition state that the older generation is richer in P, Ca, Ni, Cu, Zn, and Pt and depleted in Fe, Ti, Co, Al, and Si. The differences apparently indicate a distinct change of the geochemical environment. The Pt concentrations vary up to 1800 ppb and do not clearly correlate to one of the other metals. This might indicate a bond of multiple nature. Several mechanisms have been proposed to explain the Pt concentrations in ferromanganese samples. Our models consider seawater and cosmic spherules as responsible Pt sources. In seawater the main species of dissolved Pt probably exist as the doubly negatively charged tetrachloro-complex. A precipitation of Pt in seawater may take place if the chloro-complex is decomposed by reduction of pt2+ to pt0. On the other hand, the Mn02 precipitation is caused by an oxidation of Mn2+ which is supplied from the oxygen-minimum zone. The large activation energy needed for the oxidation of divalent ~n" in solution has been recognised, and the resulting slowness in the formation of Mn(V1)-oxihydrate sug

Jan 1, 1989

By Eric J. Foell

Recognizing that the planned commercial exploitation of polymetallic nodules in the deep sea should be accompanied by environmental studies in order to protect this largest and least understood ecosystem of our planet, the German Ministry for Research and Technology has since 1989 funded a longterm and large-scale disturbance-recolonization (DISCOL) experiment in the abyssal Peru Basin of the equatorial South Pacific Ocean. The circular study site is located at 4150m depths and encompasses about 10km2 of relatively flat, heavily sedimented sea floor with low (< 15%) nodule coverage near an existing German nodule mining exploration license area. The RV SONNE, a large and well-equipped multi-purpose research vessel, served as platform for all environmental cruises conducted to date. The initial DISCOL expedition (SO-61, Feb.-March 1989) was carried out in two legs. During DISCOL 1/1, a study site was selected, a pre-disturbance baseline assessment was undertaken, and sea floor disruption was begun using the "plow-harrow", a uniquely designed disturber device towed repeatedly across the circular study area. During DISCOL 1/2, disturber deployments continued until the device had created 78 criss-crossing and partially overlapping tracks along which nodules were essentially plowed under while sediment from up to 15cm below the seabed had been turned over and exposed at the surface. In addition to the obvious within disturber track impacts, sediment mobilized by plowing drifted off with the prevailing near-bottom current and redeposited downstream, blanketing nearby areas not directly disturbed. Immediately after the disturbance phase, an initial post-impact sampling series was performed. The DISCOL Experimental Area (DEA) was revisited about six months (DISCOL 2, SO-64, Sept. 1989), three years (DISCOL 3, SO-77, Feb. 1992), and seven years (ATESEPP SO-106, Jan.-March 1996) after disturbance to collect further post-impact samples, monitor changes in the benthic community and follow the recolonization process. In addition to benthic community studies, plankton investigations were initiated during the third DISCOL cruise (SO-77) and continued during three further cruises (SO-78, SO-79 and SO-80/2) in 1992.

Jan 1, 1996

By Richard Petters

Williamson and Associates, Inc of Seattle, Washington has recently built a remotely operated seafloor coring system for Nichiyu Giken Kogyo Ltd and the Metal Mining Agency of Japan (MMAJ). The system is designed to core to depths of 20 meters in 6,000 meters of water and will be operated from MMAJ&apos;s research vessel Hakurei-Maru No. 2 The corer uses rotary rod coring methods and will recover a core diameter of 44 mm. To facilitate coring through soft or unstable formations, the corer has the ability to set casing. The corer is fitted with thrusters for positioning during landing and telescoping legs for leveling. The system is operated through a 12 km electro-optical cable. Data displayed to the operator provides the operator with real-time feed back and control over the coring process. The operator has independent proportional control over bit weight, advance rate, rotary speed, and flushing water flow. The process of making up, breaking down and storing the drill string is automated and is controlled by a logic driven software routine. The system is currently undergoing trials in Japan. This presentation will discuss the drill&apos;s capabilities and should be of interest to those in need of a tool for assessing the thickness of marine mineral deposits.

Jan 1, 1996

By Sven Petersen, Iain J. Stobbs, Bramley J. Murton, Paul A. J. Lusty

"INTRODUCTIONIt is widely thought that seafloor massive sulphide (SMS) deposits, the modern analogue of volcanogenic massive sulphide (VMS) deposits, present a potential global resource for base (Cu, Zn) and precious metals (Au, Ag). In addition, SMS deposits can be enriched in ‘critical metals’ including Se, Te, Tl [1], which are essential for use in the construction of modern and green technologies. Globally over 340 high temperature hydrothermal sites have been identified at a range of ocean spreading centres [2], significant massive sulphide deposit formation has been recorded at 165 of these sites [3].To date only 13 deep sea sulphide deposits have undergone intrusive investigation (drilling or coring) and of these, only 6 sites have published tonnage estimates [2]. Almost all research and drilling of SMS deposits has been focused on active systems, the investigation of the morphology, subsurface structure and mineralogy of hydrothermally extinct seafloor massive sulphide (eSMS) deposits is almost non-existent.As such, little is known about the mechanisms that operate post-SMS formation and which have an impact on the preservation and hence resource value of SMS. Identifying these generic processes and mechanisms, and the extent to which they impact the resource grade, is critical in evaluating the global potential of SMS."

Jan 1, 2017

By Carl H. Hobbs

The needs of the on-going basic maintenance operations and proposed enhancement and hurricane protection projects in the City of Virginia Beach exceed the capability land-slide sources of sand. Through the past several years our studies have concentrated on locating and defining suitable quantities of sand appropriate for use on the area&apos;s beaches and assessing some of the consequences of dredging in shallow offshore areas. By providing information concerning the geological setting of sand resources, the local wave climate, and benthic infauna, the overall research project has strengthened the knowledge and understanding of several facets of Virginia&apos;s inner continental shelf. We have identified three distinct settings for deposits of beach-quality sand, two of which (filled channels and surficial shoals) are distinguishable in relatively unprocessed sub-bottom profiles and cores. The third, a sand facies within a larger stratum, is discernable only with a suite of cores. Sandbridge Shoal, about 5 km offshore of the resort and residential community of Sandbridge appears to contain a substantial quantity of sand that could be exploited with comparatively few problems. It already is designated as the source of material for use in a shoreline protection protect for a federal facility. Fluvial(?) fill of a late Pleistocene channel lust offshore of the main, commercial, resort area may offer a proximal alternative to existing and proposed resources. Ongoing work to describe the local wave climate and the possible impacts of anthropogenic alterations of the bottom topography on wave transformation and studies of the biological community as it might be affected by dredging will help fill-out our series of studies. Prior to utilization of the resource additional work is needed to provide better definition of the limits and magnitude of the sand bodies. Finally decisions concerning the use of specific resources will have to include physical, biological, economic, technical, and social considerations.

Jan 1, 1996

By Kris van Nijen

IHC Merwede, a Dutch supplier of ships and equipment for dredging and mining activities, and DEME, a Belgian dredging and environmental services group, will enter into a joint venture for deep-sea mining activities. Under their cooperative agreement, IHC Merwede will be responsible for the development and construction of technical solutions, while DEME will be responsible for operations. Together the companies will offer a unique pioneering total solution. The joint venture will be known as OceanflORE.

Jan 1, 2011