Search Documents

By Quan Situ

In evaluating the influence of increased mine ventilation utilizing the vertical production shaft as intake or exhaust, various factors, such as conveyance motion and especially the shaft guide system, have been studied. Case studies of two typical conveyance guide systems, namely rope guide (in a potash mine) and fixed guide (in a hard rock mine) are presented.

Oct 21, 2015

By H. E. Wyslouzil

Column flotation technology was introduced to the market place about thirty ago years as a device capable of producing concentrates that were lower in impurities than those produced by other types of flotation machines. The ability to operate columns with significantly deeper froth beds and the provision of a froth washing system were the main reasons cited for the improved metallurgical performance. Column cells are now well accepted by the industry for cleaning applications, but there continues to be considerable skepticism about their use as roughers. There have been several documented cases of rougher installations which fell well short of predicted metallurgical performance. The reasons for the shortcomings vary from case to case, however they can be generally attributed to incorrect sizing, inappropriate application and or a lack of understanding of how column cells must be integrated into an existing plant or new project. Columns may not be the best choice for every application. In this sense, this paper discusses some of the important considerations that designers must take into account when contemplating the use of columns as roughers.

Sep 12, 2005

By Rubén Muñoz

This paper point out the discussion and evaluation of the non-conventional water resources; the discussion of the results of a multicriteria analysis which allows understanding and evaluating the differences; advantages and disadvantages from the technical-economical, social and environmental point of view of the non conventional water supply options: re use of municipal waste water as compared to seawater supply and its two sub options: raw seawater and desalinated seawater. The results show that there are advantages and disadvantages to each approach, but that use of non-conventional water resources is a viable option for mining companies.

Sep 21, 2013

By Sabina Strmić, Fredrik Sahlström, Siv Hjorth et al

Cobalt is critical for the green energy transition, yet the mineralogical distribution and the mechanisms of concentration of Co in different types of hydrothermal ore deposits remain poorly constrained. Here we document ore mineral assemblages from the active Fåvne and Loki’s Castle seafloor massive sulfide deposits located along the Mohns Ridge in the Norwegian Sea, and determine their whole-rock and mineral chemical compositions with a special emphasis on Co.

May 10, 2023

By Sridhar Dutta

This paper point out the predictive performance of a relatively new learning model called the support vector machines (SVM) for spatial grade estimation of two grade attributes alumina and silica in a bauxite deposit of India. In developing the SVM model, it was trained with known input-output patterns of training data set which was derived by splitting the entire data set into training and prediction sets using Genetic algorithms (GA). The use of GA algorithms was made because it attempted to divide the data into two statistical similar subsets. The predictive performance of the SVM was also compared with the ordinary kriging technique using the various statistical indices including Mean Squared Error (MSE), Mean Absolute Error (MAE), Mean Error (ME) and the coefficient of determination (R2) on the prediction data set.

Sep 19, 2006

By Kevin Gunesch

In the current difficult financial markets, only the best projects will advance to the next phases of development due to limited funding. Projects are consistently being evaluated by their initial Capital Expenditure (CapEx), Net Present Value (NPV), and Internal Rate of Return (IRR). Optimizing these parameters is the best way to gain market interest. Global Resource Engineering LTD (GRE) completed an optimization study for a silver-lead-zinc project in Peru. In this sense, the objective of the study was to minimize the project initial Capital Expenditure while maximizing the Net Present Value and Internal Rate of Return. GRE accomplished this goal by completing a series of tradeoff studies for the project and combining them through the use of a multi-scenario deterministic model to find the most economic scenario.

Oct 21, 2015

By Tomás Chaparro

El presente texto señala la metodología para evaluar al Supervisor de Seguridad no solo desde el punto de vista técnico, sino también desde las habilidades interpersonales. Por ello, se revisa el perfil de dicho supervisor donde se aplica la metodología de E=QxAxP ( eficiencia del supervisor de seguridad, conocimiento, aceptación, pasion), donde el último factor, es el que prevalece como parte de la calidad del supervisor y su relación con la enseñanza.

Sep 21, 2013

By Józef Hansel

The paper point out that shaft hoists operated in Polish mines represent the average wolrd standard. In this sense, transport of mining personnel and mined material from increased depths causes no major problems, the number of hoists of considerable loading capacity still increases despite the increase in the shaft depth; the output per one mine hoist has grown considerably and high safety standards in personnel transport are provided (in the last 10 years no life was lost during personnel transport).

Sep 13, 2001

By R. W. Lawrence

This paper provides a brief overview of biogenic sulphide reagent production from elemental sulphur, discusses the main advantages of recovering metals and treating heavy metal pollution using biogenic sulphide, and presents operating results from commercial plants.

Sep 12, 2005

By Mafalda Arias

The role of our industry is essential to future societal needs and to set the foundation for a better world, it?s important to built trust and relationships inside your global team, within communities and together with stakeholders. The objective of this paper is to raise awareness of the importance of including “culture” as one of the four pillars of sustainability and to highlight the disjointed nature of the existing concept of sustainability and the goal of that concept. In other words, the conflicting propositions between the western beliefs that set the foundation of the sustainability concept and the eastern beliefs that aims to have sustainability as an end result. The incorporation of “culture” aims to find a balance, which unites these opposite perspectives to result in a more harmonious solution for society.

Sep 12, 2011

By Laurie McDonnell

As reserves of high-grade, easily accessible ores decline, it is becoming increasingly important to treat complex feeds and recover multiple target metals, and to identify approaches that will achieve this is a cost-effective manner. Hydrometallurgical treatment of sulphide based material allows for a balance between costs, recovery, and flexibility in final product selection. Glencore Technology’s hydrometallurgical solution to the treatment of sulphide ores is the Albion Process™, comprising two main steps. The first step involves ultra-fine grinding using the IsaMill™, which minimises the potential for passivation of the leaching sulphide and increases surface area for oxidation during the Albion Process™ leach. The second step is the oxidation of the finely ground sulphide concentrate utilising the HyperSparge™ for oxygen injection in Glencore Technology’s Oxidative Leach Reactors (OxiLeach™).

Sep 30, 2022

By Scott Elfen

The degree of saturation in leach facilities and waste dumps can be determined by means of this simple test equipment. A design flow rate is applied to the sample, which is equivalent to irrigation and/or the design storm event. In this sense, the paper point out that the tests were carried out on two different ore sizes from the Pierina Gold mine in Peru. The samples were remolded by using three different densities, simulating different depths within the heap. The ore was subjected to a predefined flow rate, which was equivalent to the design irrigation rate. The flow rate was increased to consider the additional effect of the design storm event during irrigation. In the future, further tests will be performed using different ores samples from operating mines and varying different parameters to help built a database and develop other useful applications from this test, such as general guidelines for maximum irrigation rates for leach facilities.

Jul 31, 2003

By Rob D. Morrison

The paper point out the opportunities for improved performance from Mine to Product using a range of technologies developed at the JKMRC. There are several underlying themes: Readily available computing power makes possible instrument like SPLIT, JKFrothCam and the JK/FEI Mineral Liberation Analyser, a large research project is underway applying acoustic monitoring techniques to large mills with the object being to more accurately monitor total mill load and ball load on-line. Taking advantage of these opportunities will require detailed ore characterization, good models and accurate measurement of mine and plant performance.

Sep 13, 2001

By Todd Hamilton

For mine closure, the prospect of treating mine drainage in near-perpetuity can be onerous – especially when flow rates are high. One closure option is to construct tunnel plugs within the adits to flood the mine and reduce discharge volumes. Flooding reduces oxygen access within the mine and hence ARD potential. It also reduces hydraulic gradients such that uncontaminated groundwater is not drawn toward open, acid-generating areas of the mine/orebody. Evaluation of the technical and economic feasibility of permanently sealing mine tunnels necessitates detailed hydrogeological and geotechnical investigations. The capital costs associated with tunnel plugs may be relatively high, and there are ongoing maintenance requirements, risk of significant leakage and even risk of catastrophic failure if improperly designed or constructed. In this sense, the paper point put the means available for assessing the liabilities associated with adits at project start up, and the options available for closure of existing adits to reduce long-term environmental liabilities.

Sep 12, 2005

By Patrick P. M. Afenya

"The paper point out the mineralogical aspects about metals processing volcano-related gold, silver and copper ores. The copper group of metals comprises gold, cooper and silver. These metals have been considered together here because of similarities in their chemical properties. Consequently, these metals commonly form minerals with the same elements or group of elements. It is realized that the formation of minerals and final physicaland chemical states of any mineral may depend on many factors such as temperature, pressure, activity of species and pH of the fluid, mode of formation, paragenesis, geological age and post crystallization events. For the purpose of this discussion, attention will be focused on temperature as the principal factor influencing mineral formation."

Jul 31, 2003

By George Shou

"The paper point out about economics of thickened tailings transportation. In this sense, the optimal concentration is determined based on the balance between the incremental costs of thickening and transportation and theincremental environmental benefits. A detailed feasibility study is essential for financial success of a tailings project. Hydraulics modeling is the key to estimate the transportation cost curve. "

Jul 31, 2003

By Mustafa Onder

The paper point out that there are two méthods in the design of the long auxiliary ventilation systems. These methods can be summarized as constant fan spacing and constant fan size. If the fans are placed at the end of the duct, leakage will increase due to the high combined pressure.Also The program called SERIP can be used to examine the effects of positioning the fans at varying distances along the duct and determine the appropriate locations.

Jul 17, 2000

By Leonard Harris

"One of the reason to its decline are nationalization of some of the United States company mines in the developing world has been the spectacular rise in extreme environmetalism, which has warped public opinion about mining and delayed and denied exploration and operating permits of many projects in the United States. In this sense, the paper point out this “disease” is speading rapidly to Latin America but can be stopped or atleast controlled, by the union of mining company forces with the strong backing of trade organizations along the lines which have been succesfully instituted in the United States. "

Jul 31, 2003

By J. Hantelmann

The Yanaquihua gold-bearing vein-fault deposit is associated with a sinistral strike-slip fault system, hosted within granite to granodiorite of the Tiabaya Super Unit of the Coastal batholith. The deposit is located near the northwest striking Cincha-Lluta-Incapuquio (System 11) regional fault system . Mineralization exhibits vertical trends and is primarily controlled by sub-vertical vein-fault structures. Mineralization includes variably abundant quartz, clay minerals, pyrite, calcite.

May 1, 2008

By Marc Leduc

Since co-disposal technology promises to replace conventional tailings disposal methods at sites with high strip ratios or plentiful old dumps. While the mine waste needs to be relatively strong and low in fine material, and chemical compatibility must be assured, when these parameters are satisfied there are no other significant hurdles to its implementation. In this sense, the paper describe the resulting benefits range from substantial reduction in capital and operating costs to reduction or essential elimination of the short- and long-term liabilities associated with tailings dams are impoundments.Since tailings dam failures are arguably the greatest environmental liability and public relations problem in the industry, reducing the quantity of tailings managed behind dams is a worthy goal.

Jul 31, 2003