RI 6488 A Pilot-Scale Fluidized-Coal Feeder utilizing Zone Fluidization

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 26
- File Size:
- 2084 KB
- Publication Date:
- Jan 1, 1964
Abstract
A pilot - scale fluidized feeder was developed for continuously feeding up
to 1 ton of pulverized coal per hour to a pressure gasifier . Fluidization in
the 3 - foot - diameter by 34-1 / 2 - foot - high feeder is effected by two streams of
inert gas , a technique called zone fluidization . A stream of inert gas
through a drilled plate in the base of a central column near the bottom of the
feeder fluidizes the coal . Another stream through a drilled plate in the
annulus between the central column and feeder wall provides a source of semifluidized
coal for the central column . Fluidized coal from the central column
discharges through an extraction funnel and discharge line . Zone fluidization
provided good fluidization with moderate requirement for fluidizing gas .
Instruments were developed for metering and recording the flow rate of
fluidized coal . A system was developed for storing , and weighing pulverized
coal , and then delivering it in fluidized form at about 1 to 8 tons per hour .
Citation
APA:
(1964) RI 6488 A Pilot-Scale Fluidized-Coal Feeder utilizing Zone FluidizationMLA: RI 6488 A Pilot-Scale Fluidized-Coal Feeder utilizing Zone Fluidization. The National Institute for Occupational Safety and Health (NIOSH), 1964.